Thursday, November 27, 2014

Grecca Beauty

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Toriya .
You need a license to use this art work. Please do not use without a license.

 You can find this art at the Scraps N Company  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
In The Tavern Kit by WaterLO Project  HERE
WSL_84 Mask HERE
Filters used
Xero-Porcelain, Clarity and Soft Vignette
Font Candlescript Demo
 
Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.

Resize paper 16 to 23%, paste and apply your mask, invert, delete and merge group. Take your pick tool later and adjust mask to fit your tag.

Resize frame wlop_itt to 25% and paste on your new layer, move to the left some and up, duplicate, change the blend mode to hard light, merge down. Duplicate, resize to 70%, move down and over to the right some, free rotate to the right at 15 degrees.
Click inside both frames with your magic wand, expand by 4, resize paper 14 to 22%, paste, invert, delete, move below the frame layers, do not deselect yet. Paste your tube, hit the delete key and select none, erase any of the tube in the smaller frame.
Erase the large frame that is showing in the smaller frame.

Resize your tube to 70% if using the same one I am, paste and just have the pottery showing in the smaller frame, erase any excess, merge this down with the other tube in the bigger frame. Duplicate, Gaussian blur at 4, change the blend mode to overlay or one you prefer.
Now apply Xero Filter-Porcelain then Clarity and then Soft Vignette with these settings
Elliptical, Foreground colorDiagonal Mesh,
0, 0, 0, 255
also apply the Soft Vignette to the paper in the frame.

Resize the original tube to 45% and place off center, being on the top layer. Move the tube below the small frame layer, duplicate and bring to the top, erase any of the legs you do not want showing above the frame.

Resize element 10 to 45% and paste on the bottom layer, duplicate, flip and mirror.
Resize element 55 to 25%, place on the bottom, below the paper layer of the frame, duplicate, flip and mirror.
Resize element 72 to 7%, place on the upper right side on the green leaves, duplicate and move to your liking, move below the tube layer.

Resize element 67 to 20%, move below the paper layer and place at the bottom of the frame on the left.

Resize element 5 to 15%, place on the left side above the frame layer.
Resize element 16 to 8% and place on the left by the wine bottle, duplicate and move over a bit.
Resize element 54 to 15%, place above the mask layer on the bottom right, duplicate, flip and mirror. Always adjust when you flip and mirror an element.

Resize element 73 to 10%, place at the upper left side, duplicate, mirror and move down to the lower right side, free rotate to the right at 20.

Resize element 36 to 30%, mirror, move below the paper layer of the frame on the right, adjust and erase the green stem you do not want showing, duplicate, free rotate to the right at 90, move to the bottom below the grape layer and adjust.
Go back to the first one again, duplicate, move to the left, free rotate to the left at 20 and adjust to your liking.
Resize element 70 to 15% and place on the right side and adjust the dragonfly.

Resize element 8 to 10%, place below the wine bottle on the left. Duplicate however many times you would like and place in different areas on your tag.

Resize element 69 to 25%, move below the paper layer of the frame, duplicate a couple of two or more times, flip and move around to your liking.

Add any other elements that you would like, once happy, close off any background and merge visible.
Resize first, then add your Copyrights and name and that's it.
 
Hope you enjoyed doing this tut.
 photo buttonforpagefall_zps98c7cc22.png 

Wednesday, November 26, 2014

Silver Christmas

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey .
You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Silver Bells Kit by Rainy Sweetz  HERE
WSL_84 Mask HERE
Filters used
Mura Meister Copies
Xero-Soft Vignette
Font Mr Lackboughs
 
Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.
Paste the dark gradient paper, flip, apply your mask, delete and merge group.
Adjust the size to fit your tag later.

Paste the silver design, resize to 85% and mirror.
Paste the outline poinsettia heart and resize to 80%, click inside with
your magic wand, expand by 5, paste the smooth silver edge paper, invert and delete, do not deselect, paste your close up, place to your liking, delete, select none.
Moving both the paper and tube below the frame layer.

Duplicate the tube layer, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to hard light and merge down, change the blend mode to Luminance (L).
Apply the Xero Filter-Soft Vignette with these settings
Elliptical, Foreground color
Diagonal Mesh,
0, 0, 0, 255

Paste snowflake 2, resize to 55%, apply Mura Meister Copies-Encircle,
move below the paper layer of the frame, sharpen once.

Paste the silver tree and resize to 70%, place on the right side, add noise at 25%.
Paste your tube, mirror and place on the left side.

Resize the gold merry Christmas button to 30%, place at the top on the left side below your tube layer.
Resize the silver holly to 30% and place on top of the button on the left.
free rotate to the right at 90 and adjust.

Paste the silver poinsettia, move to the bottom layer, up to the left corner and adjust to your liking, duplicate, flip, mirror and adjust again.
Duplicate again, bring to the top layer, resize to 40%, move to the left and below your tube layer.

Resize the hobby horse ornament to 40%, place by the tree and erase the hanger.

Resize the silver ornament to 20%, free rotate to the right at 25 and place on the right side below the horse layer.
Resize the hot chocolate to 25%, place on the left side.
Resize the ribbon to 80% move to the bottom, below the mask layer, take your pick tool and rotate it a bit to the left.

Resize the scroll to 65%, place at the upper right below the mask layer, duplicate, flip, mirror and adjust.

Add any other elements that you would like, once happy, close off any background and merge visible.
Resize first, then add your Copyrights and name and that's it.
 
Hope you enjoyed doing this tut.
 photo buttonforpagefall_zps98c7cc22.png 

Sunday, November 9, 2014

Autumn's Secrets

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  JM Leotti.
You need a license to use this art work. Please do not use without a license.
 You can find this art at the CDO Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
 Scrap Amazing Autumn by Gimptastic  HERE
Dee's Autumn Mask Set 1- #2  HERE
Xero Filter-Soft Mood and Clarity
Unplugged tools-Interlace
Font of Choice, I used Final Fantasy

Drop Shadow usually V2 H2 50 black
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image and as usual  mine 800 x 800.

Paste paper 4, resize larger to 115, apply your mask, delete and merge group.
Resize mask to fit your tag later.

Paste frame 5, duplicate, change the blend mode to overlay, merge down. Then click inside with your magic wand, expand by 5, paste paper 8, invert, delete, select none.
Paste your tube, move below the frame, duplicate, move above the frame and erase the excess part of the tube.
Apply the Xero filter, Soft Mood and then Clarity to both tubes.
Then on the top tube apply Unplugged tools, Interlace with these settings
4, 20, 1 and 0.

Paste frame 4, move to the bottom layer and down how you like it, duplicate, flip and mirror, adjust, and merge down.

Being back on the top layer, paste the seed pod on the left side and erase some of the stem.
Resize the mug to 75% and place by the seed pods.
Resize the cat to 85% and place by the mug on the left.
Resize flower 7 to 70%, place below the mug layer.
Paste flower 6 below the paper layer of the frame, mirror and move back to the left bottom side, showing just part of it past the seed pods.
Duplicate, flip, move down toward the bottom and place so some of the flower is showing again.
Paste flower 8 below the seed pod layer, mirror and adjust.
Duplicate the seed pod, mirror, flip and move to the bottom below the flower layer. Duplicate again and move more to the left and erase any stem showing.
Resize the berries to 60%, place under the flower layer.

Flower 1 resize to 75%, mirror, place just above the frame layer, duplicate and move one more to the left and down, the other more to the right and up a bit.
Refer to my tag for placement.

Paste branch 1, free rotate to the left at 90, place on the left side below all the elements, duplicate and mirror.
Paste branch 2 and move to the bottom, above one of the flower layers, duplicate and move below the flower layer and back to the left more.

Resize bird 1 to 40%, place on the left on the branch, duplicate, mirror and move to the bottom right on the branch.
Resize the ball of twine to 60%, place behind the cat on the left.

Resize Mushroom 2 to 50%, place on the right side below the elements, duplicate, mirror, bring back to the right and move lower than the first one.
Paste flower 5 at the upper right side just above the flower layer behind the paper layer of the frame.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

 photo buttonforpagefall_zps98c7cc22.png 

Tuesday, November 4, 2014

Autumn Wishes

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Chris Pastel .
You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Scrap by GS Autumn Mist  HERE
Dee's Autumn Mask Set 1-#3  HERE
Filters
Xero-Radiance, Porcelain and Soft Vignette
Mura Meister-Copies
Font Puppy Pooky
 
Drop Shadow usually V2 H2 50 black

New image a size you prefer,  as usual mine is 800 x 800.
Paste paper 4, resize larger to 125% and apply your mask, delete and merge group.

Paste frame 5, duplicate, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to screen, merge down.
Now click inside with your magic wand, expand by 5, paste paper 5 or one you prefer, invert, delete, move below the frame layer. Do not deselect yet, paste your close up tube, delete, select none.
Duplicate the tube, Adjust, Blur, Gaussian blur at 4, change the blend mode to overlay, merge down.
Apply the Xero Filter - Radiance with these settings
15, 35, 60, 155
then apply Porcelain.
Then Soft Vignette with these settings
Elliptical, Foreground color,
Diagonal Dots
0, 3, 3, 255

Paste flower 3, apply Mura Meister Copies, Encircle, move below the paper layer of the frame.
Paste charm 1, apply Mura Meister Copies, Encircle and move just above the flower you just did.

Paste flower 3, move toward the bottom of the frame, being on top of the frame layer, duplicate and mirror.
Duplicate, resize to 60%, duplicate again, mirror and place where you like them.

Paste flower 1 in the center, duplicate, resize to 70%, place on the left side below flower 3 layer, duplicate and mirror.

Resize and paste your tube and place on the right side.
If using the same tube I resized mine to 40%.
Paste the stick, free rotate to the right and place to cover the bottom of the legs.

Mirror and paste the leaf below the flower layers and toward the left more.
Paste the mushroom on the left side below the flower layers, duplicate, resize to 65%, mirror and adjust on the right side, moving below the stick layer.
Resize the candle to 75%. place on the left side below the flower layer.
Resize the nut to 75%, place on the right side below the flower layer.
Resize the Deco to 70%, free rotate to the left at 90, move above the stick layer on the right and adjust so it shows paste the nut and smaller flower, duplicate, mirror, move below the candle layer and adjust to your liking.
Duplicate it a couple more times if you like and place wherever you like.

If you want a few more of the leaves from the mask showing, I took my free hand tool and went around the part at the upper left and copied and pasted in a few places to give more leaves on some of the edges.

Add any other elements that you would like, once happy, close off any background and merge visible.
Resize first, then add your Copyrights and name and that's it.

Hope you enjoyed doing this tut.
 photo buttonforpagefall_zps98c7cc22.png