Sunday, January 15, 2017

Cupid Girl in the City


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Tunchy
The tube is called Cupid Girl
You need a license to use this art work. Please do not use without a license.
 You can find this art at  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Love for the City by Linda's Creations  HERE
Check out the rest of the Blog HERE
DD Valentine Mask VMask_1 HERE
Check out the rest of her blog HERE 
Filters
Xero-Soft Mood, Porcelain, Clarity

Font of Choice, I used The Heart of Everything

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 6,
apply your mask, delete, merge group.

Paste valentine ornament for frame, move to the right just a bit, click inside with your
magic wand, expand by 5, paste paper 4, adjust so the flower doesn't show, invert, delete,
paste your close up tube, delete, select none, move both below the frame.
Duplicate the tube, go to Adjust Blur, Gaussian blur, number on 4, change the blend mode to
soft light. 
Then apply the Xero filter, Soft Mood to the top tube default setting.
Apply the Xero filter-Porcelain to the bottom tube.

Resize the city scrape to 10%, paste below the frame, change the blend mode to hard light, erase the parts outside the frame, duplicate, move below the paper layer of the frame, duplicate, mirror.

Paste the white fence with roses below the paper layer of the frame on the right, duplicate, mirror.
Paste the red car on the frame layer at the bottom, resize to 95%.
Paste your tube on the left above the car, resize to 35%, apply the Xero filter-Porcelain first,
then Clarity.

Paste the street light on the right below the car, resize to 65%.
Resize sweetheart street sign to 25%, place on the street light.
Resize the red heart balloons to 40%, place below the street light on the right at the top.

Resize red heart with cupid bow to 35%, paste at the upper left behind the tube.

Resize the rose petals to 25%, apply Mura Meister Copies- Glob with the first number on 30,
paste at the bottom above the fence layer, on one side, erase the upper part you don't want showing, duplicate twice, mirror one and move the other to the center more.

Resize the champagne bottle to 35%, place by the car at the bottom.
Resize the red wine glass to 30%, place by the bottle.
Resize sunglasses to 40%, place by the bottle.

Resize road sign love street to 30%, paste on the left below the fence layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

 That's it
Hope you enjoyed doing my tut.

Tuesday, January 10, 2017

Love


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jose Cano
The tube is called Carmel
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Valentine Chocolate by Melissaz Creationz  HERE
Check out the rest of the Blog HERE
DD Valentine Mask NVM_1 HERE
Check out the rest of her blog HERE 
Filters
EyeCandy 4000-Chrome
Xero-Porcelain and Clarity

Font of Choice, I used The Heart of Everything

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 6,
apply your mask, delete, merge group.

Go to your Preset Shapes, select the circle, create as vector checked, width 25, draw out
a circle as large as you like, then go to Objects, align center, convert to a raster.
Apply EyeCandy 4000-Chrome with these settings or one you prefer
Reflection map-Outdoor tif.
Bevel 11.41, Bevel Height 50, Smoothness 50,
Ripple Thickness 0, Ripple Width 200.00
Inside marquee checked
To color it go to Adjust, Hue and Saturation, Colorize with these numbers
H 255, S 100
duplicate the frame, change the blend mode to Burn, merge down.
Click inside your frame, expand by 5, paste paper 3, invert, delete, select none, move below the frame.

Paste your tube, resize to 85%, move below the circle, duplicate, move above, erase
the parts over the circle and below the circle at the bottom.
Apply the Xero filter-Porcelain to both tubes, then Clarity

Resize element 8 to 70%, apply Mura Meister Copies-Encircle, move below the paper layer
of the frame.
Resize element 4 to 55%, apply Mura Meister Copies-Encircle, changing the first number to 25,
paste on the flower circle.
Paste cupcakes of choice and place at the bottom on the frame layer how you like.
Resize element 14 to 70%, paste on the left side below two layer of the cupcakes.
Paste element 19 on the right, free rotate to the right at 25 degrees.
Resize element 15 to 70%, paste above the cupcakes on the right.
Paste element 17 below the shoe layer.
Paste element 29 and 30 on the right below the shoe layer.

Resize element 8 to 70%, paste below the tube layer on the left a bit, duplicate, mirror, move up below the heart on the right, duplicate, move down so a bit of the green shows at the bottom.
Paste element 3 on the frame layer.
Paste element 12 above the tube layer at the bottom how you like.
Resize element 11 to 60%, place by the whip cream or where you like.
Paste element 22 on the left below the cupcake layers, free rotate to the left at 25 degrees.
Resize element 16 to 70%, place by the shoes.
Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

 That's it
Hope you enjoyed doing my tut.

Saturday, January 7, 2017

Evil Queen-3 Piece Set



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey.
The tube is called Evil Queen.
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Millie's PSP Madness Template 697 HERE
Millie's PSP Madness Mask 133 HERE
Check out the rest of the blog HERE
Scrap Devilicious by Scraps and Tubes HERE
Check out the rest of the blog HERE

Filters
Xero-Frittillary
Mura Meister Copies-Glob
AAA Frame-sFoto Frame
EyeCandy 4000-Gradient Glow

 Font of Choice, I used Boere Tudor

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original.
Go to Image, Resize to 90% all layers checked, then go to Canvas size and make it 800 x 800, delete the credits.
I did the resize because of my full tube being smaller, if the tube you use is larger then you may not want to resize smaller first.
Paste paper 5 on the bottom layer, apply your mask, delete, merge group.
Merge layer 2 down with layer one.

Merge layer 4 down with layer 3, select all, float, defloat, paste paper 2, invert, delete, select none, delete the template layer also.
Then apply a fat gradient glow with the first color being red and the second color being black.

Layer 5 apply the Xero filter-Fritillary with these settings twice
5, 30, 70, 50
Apply the same fat gradient glow as before.

Select layer 6, resize paper 3 to 75%, paste, invert, delete, select none. Add the same fat gradient glow as before.
Select layer 7, mirror, then paste your close up tube, invert, delete, select none. Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode to hard light or one you like, merge down.
Layer 8 just add your drop shadow.

Merge layer 10 down with 9, add noise at 50% or what you prefer.
Merge 12 down with 11, add noise at 50%.
Merge layer 14 down with 13, select all, float, defloat, paste your medium size tube and adjust the face how you would like in both squares, delete, select none.

On the wordart add a fat black gradient glow on both.

Paste your full tube on the right side on the top layer.

Paste element 18 above the black squares on the template, resize to 95%.
Resize element 43 to 50%, apply the Mura Meister Copies-Glob at default setting.
Move below the black squares, duplicate, mirror, adjust.
Paste element 3 above the rock layer, duplicate, mirror.

Resize element 12 to 50%, place down on the rocks by the tube's foot.
Resize element 8 to 50%, place on the left, being on the top layer, duplicate, mirror, move below your tube layer.
Resize element 24 to 50%, place at the top part, duplicate, flip, mirror.
Resize element 25 to 35%, paste at the bottom by the tombstone, duplicate, mirror.
Resize element 28 to 75%, paste at the top where you like, duplicate, move down on the rocks
on the left side.
Resize element 45 to 45%, free rotate to the left at 45 degrees, place below the cat and tube layer on the rocks, sharpen a couple of times.
Paste element 27 below the tombstone on the left, duplicate, mirror, move above the tombstone on the right.
Resize element 44 to 40%, free rotate to the right at 15 degrees, paste on the upper right below the tube layer.

Add any other elements you would like, make it your own.

If you want to make a signature tag and Avator do not merge your tag just yet.

Signature Tag
Open a new image 600 x250, close off your tube and cat on your tag, then copy merged to your new image, resize to 85%.
Resize paper 3 to 75%, paste on the bottom.
Go back to your tag, open your tube layer, copy and paste on the right side, being on the top layer now.
Back to your tag, copy the bird, resize to 75%, paste on the left on the headstone.
Once happy, merge visible, add a frame of choice.
I used AAA Foto Frame with these settings
3, 0, 0, 0, 20, -255, -255, 100
Add your copy right and name.

Avator
Size of choice, I did mine 175 x 200
Again go to your main tag, close off the tube, copy and paste, resize to 75%, move how you like,
then go back, open your tube, paste your tube on the right. If happy with it all, merge visible, add the same frame as before and your copyright and name.

Crop your main tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.