Pump It Up-3 Piece Set

 

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Pump Up The Volume by Melissaz Creationz  HERE
This kit is part of a Blog Train

Template 003 by Polka Dot Scraps HERE

Is part of Pump of the Volume Blog Train

It is a 3 piece template set.
 

 Rocked by Rachel Mask Set 7-#2 Mask HERE
Filters
penta.com filter-jeans
xero filter-Radiance
Font Sick Capital Vice

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*
 

Open the tag template, hold the shift key and d to duplicate and close the original.

Delete the credits.

Go to Image, canvas size and make it 800 x 800 or one you prefer. I like a big area to work on, can resize later.

Select the large rectangle, paste paper 5, invert and delete.

Paste paper 7 on the big right circle and big left circle, invert and delete.
On the right large circle frame and left large circle frame, I add noise at 100%.

Merge the top small circle down with the bottom small circle, resize paper 2 to 75% and paste, invert and delete.

Select the top left square, add a new raster layer and fill with
#b265ff or color of choice.
Apply penta.com-Jeans with these settings
Amount20 - Width4
and then sharpen.

Leave the bottom left square the color it is or if you like another color.

Select the oval layer, paste paper 5, invert and delete.

Bottom right square, select, add a new raster layer and fill with #b265ff or color of choice.
Apply penta.com-jeans to this one also and sharpen.

Select the rectangle, paste paper 5, invert delete.
Go to Adjust, Blur, Gaussian blur at 10, duplicate and merge down.
Select the rectangle again, paste E12, adjust how you like it, invert and delete.

Select the top right square, paste paper 3, invert, delete, but do not deselect yet.
Mirror and paste your tube, delete, select none.
Change the blend mode to Luminance (L) and apply xero filter Radiance.
Add noise at 100% to the Top right square frame.

Add the penta.com filter-jeans to the arrow and sharpen.

Paste paper 2, apply your mask, move to the bottom, resize larger to your liking.

Resize and paste your tube, I resized my tube to 75% and place on the left side.

Select the wordart Pump Volume, add a new raster layer, make a gradient of choice and fill.
I used #b265ff for the forground color and #4d0ec4 for the background color and set the gradient at Angle 45, Repeat 10.
Apply EyeCandy 4000 Glass with these settings
Bevel width 10.80
75, 30, 35, 50, 0, 50 and change the color to what you used on the wordart.
Then on the wordart up the, I changed to white and added a medium gradient glow to it.

Resize E07 to 35%, place below your tube layer on the left.
Resize E09 to 25% and place on the right side below the wordart.

Mirror and paste E14 below your tube layer.
Resize E13 to 25%, duplicate a couple of times and place where you like them.

Resize E20 to 25%, place at the bottom by the wordart.
Resize E11 to 50% and place on the right below the hand element.

Before merging your tag, close off all layers except the wordart layers, both and the hand and radio, merge these together, copy and paste as a new layer to use later on your avator.

Add any other elements that you would like, once happy, open all the layers and close off any background and merge visible.
Resize and then add your name and Copyrights.

Now on to the Signature tag and Avator.

Open the signature template, hold the shift key and d to duplicate and close the original.

Delete the credits.

Select the background and paste paper 5, invert and delete.
Select the oval layer, resize paper 2 to 70%, paste, invert, delete.
Bottom middle square, apply penta.com-jeans at 20-4 and sharpen twice.
Top middle square, new raster layer, fill with with #b265ff and apply penta.com-jeans with same settings and sharpen.

Large circle paste paper 7, invert, delete.
Rectangle, paste paper 5, invert and delete, then apply Gaussian blur at 10, duplicate and merge down.
Select the rectangle again, paste E12, invert and delete.

Bottom right square, add a new raster layer, fill with #b265ff and apply the penta.com filter-jeans and sharpen twice.

Top right square resize paper 3 to 70%, paste and move over to cover the square, invert, delete, do not deselect yet.
Paste your tube, delete and select none.
Change blend mode to Luminance (L) and apply xero filter-Radiance.
Paste your tube and move to the left side.
Add the penta.com-jeans to the arrow.
Do the same with the wordart as you did on your tag above.
On all the frames add noise at 100%.

Paste and mirror E14 and move below your tube layer.

Resize E9 to 20% and place on the right, below the wordart layer.
Resize E13 to 15%, duplicate a couple of time and place where you like.
Resize E20 to 15%, place toward the top and sharpen once, duplicate and move toward the bottom below the tube layer.
Resize E11 to 25% and place on the right below the hand element.
Merge visible, add a new layer, select all, fill with a color of choice, contract by 2, delete, select none. Add noise if you would like.
Add your name and Copyrights.

Avator
Open the Avator template, hold the shift key and d to duplicate and close the original.

Delete the credits.

Delete the credits and the frame, unless you want to use the frame, then do not delete.
Raster one, paste paper 5, adjust how you like, invert and delete. Apply Gaussian blur at 3.
Circle, paste paper 7, invert, delete.

Bottom square, new raster layer, fill with #b265ff, apply the penta.com filter-jeans, and sharpen.
Top square, resize paper 3 to 50%, paste, invert delete, resize your tube to 50%, paste, delete and select none.
Change the blend mode to Luminance (L) and apply xero filter, Radiance.
Resize E14 to 50%, place below the tube layer in the square.
Now the wordart, and hand layer you saved from your tag, resize to 25% and paste on your avator.
Resize E13 to 15% and one to 10% and place how you like them
Resize E20 to 15%, place at the top below the top square.
Resize E12 to 15%, place just above the bottom circle layer.
Merge visible, select all, new raster layer, fill with a color of choice, add noise if you like.
Now add your name or letter and Copyrights and you are all done.
Hope you enjoyed doing this tut.
 

 

It's Easter Time

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim.

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
It's Easter Kit by Clarez Creationz  HERE 
Rocked by Rachel Mask Set 11-#3 Mask HERE
Xero Filter-Soft Vignette
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later.

Paste paper 18, apply your mask, delete and merge group.
Resize larger to 110.

Paste frame 5, click inside with your magic wand, expand by 5, paste paper 1, invert, delete and move below your frame.

Paste frame 6 and move below the paper layer.

Resize element 46 to 85% and place on the left side, then go to Image, free rotate, rotate to the left by 10 degrees.

Paste and resize your tube, I resized mine to 50%, place more toward the right side.
Apply the Xero Filter-Soft Vignette.

Paste and resize element 57 to 50% and place on the left side by your tube.

Resize element 49 to 70%, place below the rabbit layer.
Resize a couple of the eggs to 40%.
Place on your basket and erase the part over the basket, or you can move below your basket and take your free hand tool and draw around the basket on the part of the egg you do not want to show and delete, then move the egg above the basket layer. (Makes sense I hope)

Paste a couple of eggs again, resize to 20% and paste in front of the basket how you like them. Duplicate a couple and free rotate them how you like. Play around with the eggs and place them in different areas of the basket etc.

Resize element 09 to 40%, place on the right side below the tube layer.
Resize element 33 to 30% and place under the bow and adjust, erase any of the ribbon you do not want to show.
Duplicate a couple of times, resize the first one to 80% and move down, duplicate that one and resize again to 80% and below the last one.
Resize element 32 to 20% and place on top of the bow, sharpen once.

Resize element 31 to 40%, free rotate 15 degree left and place below the rabbit layer and place on the left side, duplicate, mirror, move below the basket layer and move back to the left side more.

Resize element 39 to 30%, duplicate and place on the sign where you like them.
Duplicate one of them again, resize to 30% and place on the rabbit.

Paste element 47 just above the mask layer, duplicate, mirror and adjust to your liking.

Resize element 19 to 50%, place on the paper layer in the frame, and adjust.

 Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

Easter Bonny

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Bits N Bobs.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Spring A Ling kit by Vesta
HERE
Template #226 by Millie HERE
Rocked by Rachel Mask Set 11-#1 Mask HERE
Xero Filter-Soft Mood, Clarity and Mistifier
penta.com filter-Dot and Cross
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the d key to copy and close the original.
Go to Image, canvas size and resize it to 800 x 800, can resize later.
Delete the credits, and layers 7, 8, 9, and 10.

Paste paper 8, apply your mask, delete and merge group, resize larger to 125 and later if you want it to show more, grab your Pick tool and pull it out more.

Merge layer 2 down with layer 1 on the template, select all, float, defloat, paste paper of choice, I used #7, invert and delete. Delete your template layer also, and select none.

Merge layer 4 down with layer 3, select all, float, defloat, resize paper 2 down to 23%, paste, invert and delete, select none.

Select layer 5, paste paper 8, invert and delete.

Select layer 6, float, defloat, add a new raster layer, fill with #f0b6df, then paste your close up tube, place how you like it, invert and delete, select none.
Apply penta.com filter-Dot and Cross to the paper.
Apply the Xero Filter-Soft Mood first, then Clarity and then Mistifier to your close up tube.

Paste frame 6 above the close up layer and using your Pick Tool, adjust the frame to fit around the oval shape of the template layer.

Copy and resize your tube as needed and place on the left side.
Apply Xero Filter-Clarity.

Paste and resize element 5 to 85%, place at the bottom, just below your tube layer.

Resize element 1, 58 and 60 to 50% and place where you like, duplicate once or twice, resize one or two to 75% and place where you like. Play around with them to get the look you want.
I placed mine below the grass layer.

Resize the wordart to 55% and place on the grass layer toward the right side.

Resize element 46 to 35%, place on the left side by the tube.
Resize element 47 to 25%, mirror, place a bit behind the wordart layer, resize again to 65% and place on the wordart sign.

Resize element 42 to 25%, duplicate a couple of times and place them where you like them.

Resize element 8 to 40%, place at the top left side below the frame layer.
Resize the tree to 75%, place on the right side just above the 2 rectangle strips.

Resize the sparklies n bubbles to 90% and place just below your tube layer.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

Happy Easter

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
This was part of a Blog Train.
Scrap O' Blog Train
Spring Time kit by Tasha Playground
HERE
Rocked by Rachel Mask Set 9-#3 Mask HERE
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper 2, apply your mask, delete and merge group.
Adjust with your pick tool later.

Paste frame 1, lower opacity to 75% or what you like.

Resize and paste your tube as needed, if using the same one I am, I resize it to 50%.

Paste the flower element on the right side, duplicate mirror, move below your tube layer on the left side.

Paste the grass on the right side below the flower layer, duplicate, mirror, move below the flower layer on that side also, duplicate, resize to 50% and place behind the tube where you like it.

Being on the top layer, paste the swoosh element on the right side, duplicate, mirror and move below the flower layer on the left side.

Paste and resize the rabbit to 50%, move below the tube layer on the right side, duplicate, mirror and move up behind the tube layer as if looking over her.

Paste the greenery just above the mask layer on the bottom.
Paste the ladder on the left side just above the frame layer.

Paste the butterflies and resize to 50%, duplicate and place where you like them.

Resize the branch to 50%, move above the grass layers, duplicate a couple of times, place how you like them, may have to mirror one or two also.

Resize flower 2 to 50%, place on the left side just above the ladder layer and out where you can see it a bit, duplicate and mirror.

Then decide to add the close up to the mask, select the mask layer, select all, float, defloat, paste your close up, I mirrored mine first, invert and delete. change blend mode to soft light.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

I Wuf Books

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Maryline Cazenave.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
This was part of a Blog Train.
Scrap A Passion for Reading by Creative Scraps
HERE
WSL_Mask 84 HERE
Font Gooddog Cool 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

This is an easy peasy one.

Paste frame 1, duplicate and resize to 90%, click inside the larger frame with your magic wand, expand by 5, paste paper 4, or one you prefer, invert and delete, move to the bottom.

Paste element 27 and resize to 70% and place on the paper layer toward the top, duplicate and move down some.

Paste your tube on the right side.

Paste element 12, mirror and free rotate to the right at 15 degrees and place behind your tube layer.

Paste element 16 and resize to 50%, place on the left side below the tube layer, duplicate and slide out a bit.

Resize element 1 to 50%, place behind the book layer.

Resize element 3 to 40% and place on top of the books on the left side.

Paste paper 2, apply your mask, delete and merge group and make larger to 110%, move to the bottom.

Back on the top later, paste element 14 and resize to 35% and place toward the left side.

Then type some kind of saying you would like your tag to say.
I typed out I wuf Books.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

My Fuzzy Bunny

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

You need a license to use this art work. Please do not use without a license.

You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Fuzzy Bunny by Amy & Leah Gimptastic
HERE
xero filter-Porcelain and Mistifier
Mura Meister Filter-Encircle
WSL_Mask 84 HERE
Font aka Dora 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste frame 4, click inside with your magic wand, paste your close up tube, invert and delete and paste a paper of choice, delete and select none.
Moving both below your frame layer.

Duplicate your close up, go to Adjust, Blur, Gaussian blur and change the radius to 4, then blend mode to Overlay or one you prefer, then merge down.
Apply the xero filter-Porcelain first, then Mistifier, changing the haziness to 140.

Paste your tube toward the bottom on top of the frame layer.

Paste the deco and resize to 55%, apply Mura Meister filter, Encircle and move below the paper layer.

Resize the wordart to 85% and place at the bottom part of your tag.

Resize the bucket to 50%, place on the left side behind your tube layer.

Paste and resize the egg to 40%, place on the right side, below your tube layer, duplicate, Image, free rotate to the right and move over a bit and below the first egg.

Resize the broken egg to 40% and place on the right in front of the other eggs.

Paste the grass just above your tube layer and move the broken egg above the grass layer, duplicate and mirror.

Paste paper 4, apply your mask, delete and merge group, then resize it up to 145% and move to the bottom layer.

Resize flower 2 to 15%, duplicate a few times and place on the grass in different areas.
Resize flower one to 15%, duplicate and place how you like them.

Place the ribbon at the bottom, just above the frame layer, duplicate and mirror, adjust to your liking.

Resize the butterfly to 50%, free rotate to the left at 10 degrees and place where you like it, then duplicate and mirror.

Resize the bow to 85%, place at top of frame, then go to Adjust, Hue and Saturation, colorize
H 226,  S207.
Resize the bead to 50% and place in the center of the bow.

Resize the leafs to 75% and place where you like below the other layers, duplicate and mirror and move around.

Paste the rolled paper and place above the ribbon layer, duplicate and mirror, adjust as needed.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

Can I Be Your Bunny

 

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Snuggle Bunny by Amy & Leah Gimptastic
HERE
xero filter-Soft Mood
WSL_Mask 208 HERE
Font Happy Easter 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste frame 5, then paste frame 3. Add your drop shadow on the drop frame, then change the setting to V-2, H-2 and apply again, then merge down.

Click inside with your magic wand, expand by 5, paste paper 10, invert and delete, select none.
Move below the frame layer.

Paste the element lace and move below the paper layer and to the top, duplicate, flip, duplicate again go to Image, free rotate, rotate to the left at 90 degrees, duplicate and mirror.
Make any adjustments of the laces and then merge the lace layers together.
Add a drop shadow of V2, H2 and use the color of the paper for the drop shadow.

With your magic wand, click inside the frame and expand by 2 and paste your close up tube, invert and delete.
Change the blend mode to Luminance (L) and apply the xero filter- Soft Mood first and then Mistifier.

Being on the top frame, paste your tube and place on the right side.

Paste the wallet and resize to 75% and place on the left side.
Paste the boxes and resize to 70% and place below the wallet on the left side.

Paste the EggPop, resize to 75%, free rotate to the left at 10 degrees and move below the box layer.
Duplicate, mirror and move back to the left side and adjust.

Copy and paste the sparkle layer just below the tube layer on the right side, be sure to check if any needs to be erased on the bottom area.

Resize the Cute Bunny to 75% and place on the right side.

Using your font, type out Can I be your at 48 pixels, then change it to 72 and type out Bunny, merge down, select all, float, defloat, expand by 2, new raster layer, fill with a darker color and move below, add your drop shadow, then moving to the top word layer, merge down.

Resize the Bunny mask to 25% and place on the right side above the wordart, duplicate, mirror and move to the upper left of the frame.

Copy and paste the pom poms and move just above the boxes on the left side.

Paste paper 4, apply your mask, delete and merge group, resize mask up to 140 and move below the lace layer.

Paste the Scatters just above the mask layer, duplicate, flip and mirror.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.