You're Awesome

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called Autumn.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
SE_Template 29 HERE
Check out the rest of the blog HERE

 Scrap Harvest of Blessings by Horseplay's Pasture Design  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 128_Mask 4  HERE
Check out the rest of the blog HERE

 Font of Choice, I used Hector le Dragon

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open the template, hold the shift and hit the letter d to duplicate, close the original,
delete the credits.
Paste paper of choice, I used #6, apply your mask, delete, merge group.

Background square, select, float, defloat, paste paper of choice, I used # 4, invert, delete, delete the template layer also.
On the arrow shape bg, add noise at 75%.
Select the arrow shape, select all, float, defloat, paste paper 3, invert, delete, delete the template layer also.
Select the double strip, paste paper of choice as before, I used #14 and delete.
Right frame bg, select, float, defloat, paste paper # 14, invert, delete, delete the template layer also.
Right frame fill, paste paper 12, invert, delete.
Do the same with the Left frame fill, with the same paper.

Select the black wordart, paste paper # 14, invert, delete, delete the black wordart, add noise at 40%, then merge down with the other two parts of the wordart,
free rotate to the right at 90, move to the right how you like.

Paste element 24 below the right frame, erase the parts showing outside the frame, duplicate,
move up to just below the left frame, position and erase any part outside that frame also.

On the right frame, select all, float, defloat, paste paper # 11, invert delete, delete the white frame also.
Do the same with the left frame also.
Then go to Effects, 3D Effects, Inner bevel with these settings and apply to both frames.
Bevel Shape 2
Width 2
3, 2, 0, 10
315, 50, 30
color white
Paste your tube, resize to 35%, place in the center, being on the top layer.

Resize element 19 to 75%. paste below the wordart layer on the right, duplicate, mirror.
Resize element 62 to 75%, paste above the arrow shape bg, place at the upper right, duplicate, move down, duplicate, mirror, adjust on the left how you like, duplicate, move down.

Resize element 18 to 25%, being on the top layer, place on the left by the box of the tube, duplicate, mirror, move below the tube layer, adjust.

Resize element 54 to 75%, place on the left below the leaf layer.
Resize element 10 to 75%, free rotate to the left, move below the leaf layer on the left, duplicate, mirror.
Paste element 53 under the tube layer at the bottom.
Paste element 61 at the bottom also below the tube layer.
Paste element 51 below the leaf layers on the right side.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Sunflowery Day

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called Sunflower

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Sunflower Daze  by Jenns Designs HERE
Check out the rest of the blog HERE
Rachael Designs Mask Set 111_4  HERE

Font of Choice, I used Good Dog Cool

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 6 or one of choice, apply your mask, delete and merge group.

Paste element 45, resize to 90%, move down some.
Paste element 5 below the grass layer.

Paste your tube, resize to 30% and place on the grass.

Paste element 8 on the right, below the grass layer, duplicate, mirror.
Resize element 24 to 50%, place below the fence on the right, duplicate 3 more times, adjust to your liking.

Resize element 40 to 55%, place on the left below the dog layer.

Resize element 17 to 25%, place in front of the tube layer by the feet, duplicate, resize to 70%, place over by the bucket, duplicate again, mirror, move below the tube layer.
Paste element 11 below the grass layer, resize to 75%.
Resize element 18 to 60%, place on the left side.
Resize element 14 to 75%, paste on the mask layer, duplicate, mirror.

Paste element 9 above the mask layer at the upper left, duplicate, mirror, duplicate, flip, duplicate, mirror.

Paste element 50 on the top layer at the upper right.
Resize element 48 to 50%, place on grass on the right, duplicate a couple more times and place by the dark part of the flowers on the right, and move one down a bit more.
Resize element 34 to 50%, free rotate to the left at 90, paste at the bottom above the grass layer on the left, duplicate, mirror.

Resize element 7 to 75%, free rotate to the left at 50, paste above the wagon on the right, erase some of the string by the flowers.

Resize element 22 to 50%, place in front of the tube on the right.
Resize element 38 to 70%, paste below the tag layer you just pasted, duplicate, mirror.
Resize element 23 to 25%, mirror, place on the stem of the flower on the tube.
Paste frame 1 below the mask layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

So Lucky

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called lucky

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Feeling Lucky by Manipulated By Magik  HERE
Check out the rest of the blog HERE
Mask WSL_84  HERE
Filters
penta.com-Dot and Cross
xero-Porcelain
Unplugged Tools-Interlace
EyeCandy4000-Gradient Glow

Font of Choice, I used Celtic

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 4 or one of choice, apply your mask, delete and merge group.
Paste frame 5, resize to 90%, free rotate to the left at 10, duplicate, mirror, move both frames, one to the left, the other to the right until they are how you like them, then merge down.
Duplicate the frame, change the blend mode to Burn, merge down, then apply the filter
penta.com-Dot and Cross
72, 10, 2
Select your magic wand, click inside the frames, expand by 5, paste paper 2, invert delete, move below the frame.
Resize your tube to 40%, paste on the right frame, mirror the original tube and paste in the left frame, delete both, select none, merge down.
Duplicate the tubes in the frame, Gaussian blur at 4, change the blend mode to Screen.
Apply the xero filter-Porcelain and then
Unplugged Tools-Interlace with these setting 4, 24, 2, 4

Resize your tube to 33%, paste in the center on top of the frame layer.

Paste the paint splatter on the mask layer at one side, duplicate, flip, duplicate, mirror, duplicate flip and adjust all to fit your tag better.

Paste the glitter layer under your tube layer, duplicate, mirror.

Resize the mouse to 50%, mirror, paste above your tube layer on the right.
Resize the balloons to 50%, place below the mouse and make it look like he is holding them by the hand.

Resize the coin to 30%, place under the mouse, duplicate twice and move below the tube layer and one off to the right more and the other to the left more.

Resize the word lucky to 70%, paste at the bottom, apply the penta.com-Dot and Cross and then add a fat white gradient glow with EyeCandy 4000-Gradient Glow

Paste the sparkle above the paint splatters, duplicate, mirror and adjust.

Resize the leprechaun on a horseshoe to 40%, place on the left below the wordart.
Resize the goodie bag to 50%, place on the left below the tube layer.
Resize the clover scatter to 50%, place on one side of the frame layer, duplicate, mirror.
Resize the winged shamrock to 50%, place on the upper left on the frame.

Resize bow 3 to 50%, paste on the upper right corner of the frame.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Frozen Memories

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called Ice Queen

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Frozen Memories by Russia/Dutch Heart  HERE
Check out the rest of the blog HERE
RD Mask Set 101, I used #4  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Line*

 

Font of Choice, I used Candlescript

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize paper 6 to 22%, paste, apply your mask, delete, merge group, duplicate, flip, mirror, merge down.

Resize frame 2 to 30%, free rotate to the left at 15 degrees, change the blend mode to overlay, duplicate, change the blend mode to hard light, merge down.
Resize the original frame 2 to 30% and paste on top of the rotated frame.

Resize element 7 to 25%, change the blend mode to Luminance (L), move below the frame layer.
Resize element 11 to 30%, paste below the house layer, change the blend mode to Luminance (L).

Being on the top layer, resize element 16 to 30%, paste on top of the frame layer.
Use a light drop shadow on this and sharpen once.

Resize your tube to 33%, paste on the right side below the frame, erase the leg parts, duplicate, bring to the top and erase the part covering the wordart memories.
Being on the bottom tube, duplicate, mirror, place below the tree layer, change the blend mode to screen, duplicate, merge down.

Resize element 15 to 20%, paste on the left side.
Resize element 1 to 8%, apply Mura Meister Copies-Line* with the 1/n Fade out checked, paste below the snow couple layer, erase the sides you do not want showing.
 Duplicate, free rotate to the right at 90 degrees, move to the right below the frozen wordart layer.

Resize element 4 to 10%, place above the snow couple layer to the right side of them, change the blend mode to Luminance (L), duplicate, resize to 65%, place on the left below the snow couple layer.
Resize element 9 to 10%, place below the other flowers on the left, go to Adjust, Hue and Saturation, colorize with both numbers on 0.

Resize element 22 to 15%, below the flower layers, change the blend mode to screen.

Resize element 19 to 55%, paste above the mask layer, move up and over to the right a bit, duplicate, mirror, move down and to the left a bit, merge down, add noise at 100%.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.