Rock On Valentine

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac 

The tube is called Rock Hard.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
DD's Template 10 - Valentine Heart Sings HERE

 DD's Valentine Mask 7 HERE
Check out the rest of her blog  HERE

Filters
Xero-Mistifier
VM Extravaganza-Transmission
PhotoEffex-Scanlines
EyeCandy 4000-Bevel Boss (Optional)
 

 Font of Choice, I used Shelley Volante BT 

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original, delete credits.
Go to Image, Canvas size, make it 800 x 800 or a size you prefer.
On the bottom layer, add a new layer, fill with #cd0000, apply your mask, delete, merge group.

Merge black strip one down with black strip 2, apply EyeCandy 4000-Glass
Apply twice with these settings or play around and get the look you want.Bevel Width 10.80
Smoothness 75
Inside marquee checked
30, 35, 50, 0, 50, Color black
Bevel Profile on Button
Lighting, 120, 47
100, 40
Ripple thickness 35, 72
Then change the lighting direction to
324, 48, apply again.

Large red circle, apply the glass with the last settings you use, add noise at 40%.

Large white circle add noise at 40% or what you prefer.
Now select your white circle, float, defloat, paste your close up tube, invert, delete, duplicate.  Apply Gaussian blur at 5, change the blend mode to hard light, merge down.
Apply the Xero filter-Mistifier with these settings
255, 165, 255, 255, 255
Large circle overlay, leave as is.

Red circle, select, float, defloat, mirror your tube, paste, invert, delete, change the blend mode to screen. Apply the Xero filter-Soft Mood.
Then apply VM Extravaganza-Transmission to the red circle with these settings
40, 10
Then apply PhotoEffex-Scanlines
2, 2, 20, 10
0, 0
Now apply EyeCandy 4000 Bevel Boss with these settings
13.76, 50, 75, 0
Inside marquee checked
Lighting, 210, 54
Bevel Profile, Button
Colors White and Black

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

I "LOVE" You

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac 

The tube is called I Love.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Forever Love by Designs by Sharon at CMC HERE
 WSL-Mask 84 HERE

Filters
Screen Works-Light Gauze
Mura Meister Copies-Encircle
 

 Font of Choice, I used Big Surprise 

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, resize element 16 to 85%, apply Mura Meister Copies-Encircle, changing the first number to 16.
Apply your mask, delete and merge group, resizing the mask larger to 110.

Paste fc1, duplicate, resize smaller to 86%, move below the top frame, click inside with your magic wand, expand by 5, paste paper 3, invert, delete, move below the frames, mirror your close up tube, paste, delete select none.
Duplicate the tube, Gaussian blur at 5, change the blend mode to screen.
Apply the filter Screen Works-Dot Screen, merge down.
On the frames take your magic wand, click on the parts you would like to add noise at 40%.  You will have to click several times or you could use your free hand tool and draw around the parts you would like the noise.

Paste your full tube on the right, resize to 95%.

Paste the wordart at the bottom, apply a medium white gradient glow, duplicate, move to the top, below the paper layer of the frame layers.

Resize element 17 to 60%, paste on the right above your tube layer.
Resize element 7 to 50%, paste on the right.
Resize element 2 to 50%, paste on the left side below the wordart layer.
Resize element 5 to 50%, paste on the left below the wordart.
Resize element 13 to 50%, duplicate, place more in the center below the wordart.
Resize element 4 to 40%, place by the bottles, duplicate, mirror, adjust.
Resize element 10 to 50%, paste on the left below the phone.
Resize element 6 to 40%, place by the phone.
Resize element 20 to 30%, paste on the right between the chocolate glass and perfume.
Resize element 9 to 30%, free rotate to the left at 90, place by the phone under the wordart.
Resize element 18 to 30%, duplicate a couple of times, place where you like below some of the other layers.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Give Thanks (Kiss the Cook)

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

The tube is called Sexy Baking, it is a free tube.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store in the free section  HERE
Be sure to check out the rest of his Store HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Give Thanks former PTU now FTU by Gimptastic  HERE
Check out the rest of her blog HERE
Mask 33 by Ria's PSP Paradise HERE
Check out the rest of her blog HERE

Filters
Mura Meister Copies-Encircle
Xero-Soft Vignette
EyeCandy4000-Gradient Glow
 

Font of Choice, I used Amperzand

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 1, resize larger to 135%, apply your mask, delete and merge group, then resize your mask again to 117%.

Paste frame 5, duplicate, change the blend mode to overlay, merge down, click inside with your magic wand, expand by 5, paste paper 3, invert, delete, move below the frame. Do not deselect yet, mirror your tube first, then paste where you like, delete, select none.
Duplicate the tube, go to Adjust, Blur, Gaussian blur at 5, change the blend mode to hard light, merge down.  Apply the Xero filter-Soft Vignette with these settings
Elliptical
Foreground color
Diagonal dots
1, 0, 0, 255
Resize your tube to 40%, place on the left side on the frame, apply a fat gradient glow using EyeCandy4000 with this color #ffaf83, you will need to change both color boxes.

Paste leaf 2 below the paper layer of the frame, apply Mura Meister Copies-Encircle with the first number changed to 20.
Then paste leaf 3, apply Mura Meister again.
Paste the scatters between the leaf layers, resize to 45%, apply Mura Meister Copies-Encircle with the same settings as before and adjust.

Paste the pie and cup saucer, resize both to 85%, place on the right side below the word banner.
Paste the branch below the frame layer on the right, duplicate, mirror.

Resize the pumpkin to 60%, place below the pie layer and move more toward the center.

Resize the square brad to 75%, paste on the left below the tube, free rotate to the left at 20%.
Resize the turkey to 45%, place on the right on the pie edge.

Resize the heart to 50%, place on the square brad at the top.
Paste the ribbon below the pumpkin layer at the bottom and adjust to your liking.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Autumn Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

The tube is called Sweater Attitude

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Harvest of Blessings by Horseplay Pasture's Designs  HERE
3rd one down
DD Mask 2nd one down   HERE
Be sure to check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle
Xero-Soft Mood, Titanium, Clarity and Soft Vignette
 

Font of Choice, I used Galathea

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer working with.
I like lots of room, can resize later.

Paste paper 14, apply your mask, invert, delete.

Paste element 33, resize to 80%, free rotate to the left, click inside with your magic wand, expand by 5, paste paper of choice, I used paper 15, invert, delete, mirror your close up tube first, then paste, delete, select none.

Apply the Xero Filter-Soft Mood all numbers on 50 except the last 2 are on 0,
Titanium with Subtle checked and numbers 20, 50, 50, 127
and then Clarity, 128, 3, 50.
Merge tube down with the paper in the frame and then apply Soft Vignette with these settings
Elliptical, Foreground, Diagonal Dots all numbers on 0 except the last one is 255.

Paste your tube on the left above the frame layer, resize to 35% if using the same one I am.

Paste element 43 below the paper layer of the frame, move to the bottom, duplicate, flip, duplicate, free rotate to the left, move on the side, duplicate, mirror and adjust all to your liking.

Resize element 62 to 35%, paste just below the paper layer of the frame, apply Mura Meister Copies-Encircle, change the first number to 25, take your pick tool to adjust to fit how you like.

Resize element 51 to 75%, paste below the tube on the lower right, duplicate, move up behind the tube head and move to just above the mask layer.

Resize element 46 to 60%, place at the top on the frame.
Resize element 40 to 50%, place on the left.
Resize element 56 to 40%, place on the left.
Resize element 57 to 70%, place on the left in front of the coffee pot.
Resize element 54 to 55%, place below the coffee pot on the left.
Resize element 18 to 55%, paste below the coffee pot layer and to the left, duplicate, move over to off center, then duplicate again, move above the flower on the right.

Resize element 11 to 45%, mirror first, then paste below the flower layer on the right behind the tube, duplicate, resize to 80%, and move toward the center more.

Paste element 61 at the bottom, just above the frame layer, duplicate, free rotate to the left, place on one side, duplicate, mirror.

Resize element 15 to 30%, free rotate to the left at 25, place at the top, duplicate a couple of times, mirror one and place them where you like.

Resize element 41 to 30%, place on the birdhouse on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

**RAC Special Buy 03-16-15-03-17-15**

**RAC Special Buy 03-16-15-03-17-15**

Get The 2013-2015 Fun Pinup Bunny HD SL

FREE with a $2.00 Purchase .

Just pop it in your cart at check out. No GC's accepted as a form of payment.

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

You need a license to use this art work. Please do not use without a license.

 You can find this art and kit at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Easter Parade by Kittz Kreationz   HERE

RR Mask 2_1  HERE

Dee Template HERE
Xero Filter-Soft Mood

Font of Choice,  I used Billion Stars

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, shift and the letter D to duplicate,
close the original and delete the credits.

Paste paper 6, apply your mask, delete, merge group.

Select the white oval, add noise at 100%.

Select the blue oval ring and fill with #c82995.

Select the Blue Oval, paste paper 11, invert, delete.

Select the Peach circle, paste paper 5, invert, delete.

White rectangle, add noise at 100%.

Select the green rectangle, mirror your tube first, paste, invert, delete,
select none, apply the xero filter-Soft Mood.

Select the purple square, float defloat, resize your tube first to 55%, paste
the face in the square, invert, delete, change the blend mode to
Luminance (L).

Resize your tube to 35%, place on the right below the wordart.

Select the cremem strip, paste paper 9, invert, delete.
On the purple and blue strips add noise at 50% or a paper of choice.

Leave the yellow circle and purple square as is.
Add noise to the word bunny at 50%.

Resize element 26 to 50%, place on the left side below the wordart.

Resize element 21 to 40%, place on the left by the flowers.

Resize element 7 to 40% and place on the left side.

Resize element 3 to 50%, place below the tube layer at the bottom.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Pumpkin Fever

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Spooks-R-Us - By Sweet As Honey  HERE
Millie's PSP Madness Template 356 HERE
 Millie's Madness Mask 54  HERE

Eye Candy 4000-Gradient glow (Optional)
Font of Choice, I used Volutes

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, duplicate and close the original, delete the credits.
And as I usually go to Image, canvas size 800 x 800.

Add a new raster layer, paste paper 5, apply your mask, merge group and delete.
Move to the bottom layer.

Select raster 9 on the template, new raster layer, fill with #dc791d, deleting your template layers as you go along.

Paste the haunted house 1, resize to 75%, place on the left side, below raster 2, now select raster 2, paste paper 7, invert, delete, select none.
Paste frame 1 below raster 2 layer, using your Pick Tool, pull in the sides and top to fit how you want behind the circle. Duplicate, change the blend mode to hard light and merge down.

Select layer 3, new layer, fill with #dc791d.
Raster 4, paste paper 10.
Layer 5, new layer, fill with #870000.
Layer 6, paste paper 9.
Leave layer 7 as is or change the color if you like.

Paste the gate, resize to 70% and place more on the left side, adjust how you like once you paste your tube.

Paste the Haunted House 1 again resize to 75%, mirror and place on the right side.
Paste the skull flower below layer 4 on the right behind the house and adjust, duplicate, mirror, move below the frame layer and up on the left side.

Paste your tube, if using the same one I am, I resized mine to 80%.

Resize the Halloween lights to 50%, place below the tube layer on the gate.

Catinpumpkin, resize to 40%, place below the lights layer on the left side, so it is showing behind the leg of your tube.

Pumpkin 1 resize to 40%, place on the right side below your tube layer.

Halloween cupcake, resize to 30%, place at the bottom by the pumpkins on your right.

Resize the funny spider to 25%, place on the pumpkins where you like it, duplicate, mirror and place again.

Paste and resize Cloud 1, place on one side, duplicate, mirror and adjust to your liking, having them below your tube layer.

Resize bat 1 to 25%, mirror, place on the left side under the cloud layer.

On the Pumpkin wordart add a fat white gradient, moving the wordart where you want it.  Then on the wordart fever add an orange fat gradient.
Resize the lantern to 40%, place on the tree branch and erase a bit of the loop to make it look like it is hanging on the branch, duplicate and mirror.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Rock On

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Purple Dreams Scraps - Rock On  HERE
Use to be PTU now FTU
 Melissaz Creationz Mask 6  HERE

Filters used
Unplugged Tools-Interlace

Font of Choice, I used Clive Barker

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

And as I usually go to Image, canvas size 800 x 800.

Add a new raster layer, paste paper 3, apply your mask, merge group and delete.

Paste the large frame, free rotate to the left at 5 degrees, click inside with your magic wand, expand by 5, paste paper 8 or one you prefer, invert, delete.
Do not deselect yet, paste your close up tube and move to the left a bit, delete, select none. Duplicate your tube, go to Adjust, blur, Gaussian blur at 5%, change the blend mode to screen or one you like, merge down.

Duplicate your frame, resize to 55%, mirror and move down on the right side, click inside with your magic wand, expand by 5 and paste paper 8, invert, delete.
Mirror your tube, then paste the belt buckle part in the small frame, delete, select none.
Duplicate, Adjust, blur, Gaussian blur at 5%, change the blend mode to screen, merge down, select none.
Apply Unplugged Tools-Interlace with these settings
12, 40, 1, 0
Also apply this same filter to the paper on the large frame.
Paste the lights and move to the top of the large frame, free rotate to the left at 5 degrees.
Paste the light beam and place on one side, duplicate and mirror and place on the other side.

Resize your tube to 43%, if using the same one I am and paste off center a bit.
If you want the light beams on your tube layer, then move your tube down under the light layer.

Paste the wire star above the mask layer on the lower right side, duplicate, flip and mirror, adjust how you want it.
Paste wire 2 on the upper right side, move out a bit, duplicate, mirror, flip and adjust.
Paste the splatter on the upper right side above the wire layer, duplicate, mirror, flip.

Paste the film strip at the bottom, above the large frame layer, click inside each square and expand by 3, paste paper 11, invert, delete, make sure the paper layer is below the film strip.

Resize the stool to 50%, place on the left side above the film strip layer.
Resize the microphone to 30%, free rotate to the right at 90 and place on the stool.
Resize the guitar to 85%, free rotate to the right at 10 degrees and place by the stool.
Resize the pills to 15% and place on the base of the stool at the bottom.
Resize the CD to 30%, duplicate 2 or 3 times more and place them below the small frame paper layer in different areas.
Paste the chain below the tube layer at the bottom.
Resize the lips to 40%, free rotate to the left at 15 and place on the upper right side.
Resize the music notes to 30%, rotate one or two at 15 degree, duplicate and place where you like them.
Paste the Disco Ball above the wire layers on the upper left side.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.