Good Luck-3 Piece Set

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Aileen.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap by C.S.E. Designs Luck HERE
Kit no longer available 

Check out the rest of the blog HERE
DD SPD Mask 2  HERE

Check out the rest of the blog HERE

Filters

Xero-Bad Dream and Clarity
Mura Meister Copies-Encircle

 Font of Choice, I used bu Wicked

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 2, resize larger to 130%, apply
your mask, delete, merge group, then resize larger again to 110%.

Resize element 38 to 80%, duplicate, mirror, flip, erase as much of the fern part as your can and move below the first one.
Paste your close up tube, mirror and move off to the left a bit,
then take either your free hand tool and draw around it or your eraser and erase the part outside this element.
Apply the Xero filter-Bad Dream to your tube first, then Clarity.

Resize element 44 to 50%, paste at the bottom.

Paste your full tube below the wordart, duplicate, move above the wordart,
erasing some of the leg.

Resize element 8 to 50%, apply Mura Meister Copies-Encircle, change the first number
to 14, move to just above the mask layer, duplicate, mirror, erasing any part showing inside.

Paste element 8 on the left below the wordart.
Resize element 10 to 60%, paste on the right below the tube layer.

Resize element 21 to 40%, paste on the right in front of the pot of gold.
Resize element 46 to 30%, paste on the left above the wordart.

Resize element 45 to 40%, paste on the right on the hat part, duplicate, mirror, paste on
the pot of gold, erase some of the sparkle hanging off the hat.
Resize element 30 to 45%, paste below the frog layer on the wordart.

Resize element 39 to 75%, mirror, paste below the pot of gold.
Resize element 42 to 50%, paste on the rainbow, erasing the part off the rainbow,
duplicate a couple times, move down, erasing any part you don't want.

I saved this for last, resize element 25 to 37%, flip apply Mura Meister Copies-Enicircle,
change the first number to 20, move to just above the mask layer, then take
your Pick tool and adjust to fit your frame better, erasing any showing inside the frame area.

Add any other elements that you want.

If you want to do a Signature tag and Avator, don't merge your tag just yet.

Signature
Size 600x200
Close off your tube on your tag, copy merged and paste.
Then take your middle size tube and paste, resize to 90% and move to the right,
or
if you prefer to use the tube from your tag, open and copy and paste that one.
Resize the frog to 40%, paste on the left.
If happy, merge visible, add a frame of choice.
I used AAA frames-Foto frames, width at 3, all other number left as is.
Add your copyright and name.
Avator
Size of choice, I used 200x200
Took my preset tool and drew a circle out with a width of 2 and background null.
Draw the circle, change to raster, paste  your signature tag with the tube showing, click inside
with the magic wand, expand by 2, invert, delete, move below the frame, select none.
Add noise at 100% to the frame.
Add your copyright and name.

Crop your main tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

St Patty Beauty

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Barbara Jensen.

The tube is called Blueberry Pie-Layered #64.

You need a license to use this art work. Please do not use without a license.
 

 You can find her art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Luck of the Charms by Disturbed Scraps  HERE
Check out the rest of the blog HERE
Mask WSL_84  HERE

Font of Choice, I used give me some sugar

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 10, apply your mask, delete, merge group.
I resize my mask larger to 110%.

Paste element 012, free rotate to the left at 5 degrees, move to the left some, click inside with your magic wand, expand by 5, paste paper 06, invert, delete, mirror and paste your tube, delete, select none.
Duplicate your tube, Gaussian blur at 4, change the blend mode to screen, merge down, now change the blend mode to Luminance (L).
Close off your mask and any background you might have, merge these layers together, then reopen your mask and background layer.

Paste your tube on the right side above the frame layer, moving to the right more.

Paste element 040 on the right below your tube layer and move up some, duplicate, mirror, duplicate again, move down and erase the trunk part showing at the bottom, adjust to your liking.
Paste element 052 on the upper right below the frame layer, adjust a bit above the tree, duplicate, mirror, flip, adjust, duplicate, mirror, adjust again.

Paste element 025 below the tube layer at the top.

Paste element 059 on the right below the sparkle layer close to the left side of the tube, duplicate, move out up a bit higher on the right of the tube.
Duplicate, mirror, duplicate, resize to 75%, adjust both on the left side.

Paste element 029 on the tube layer at the bottom to cover the cut off part of the legs.
Paste element 03, resize to 50%, place on the left side.
Resize element 008 to 55%, place on the left below the wordart sign.

Paste element 060 on the left bottom side below the frame layer, duplicate, mirror, move above the long flower stem on the right side.

Resize element 055 to 55%, paste below the frame layer on the left at the bottom, duplicate, mirror, duplicate again and move more to the center and above the green leaf layer. Duplicate the left one again, flip, move down some and below the large flower layer.

Resize element 047 to 60%, duplicate once or twice and place them where you like.
Resize element 023 to 95%, paste at the bottom on the top layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

St Patty Faery

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap 50 Shades of Shamrocks by Tasha's Playground  HERE
Check out the rest of the blog HERE
Mask 27 by Angie Tagged Me HERE
Check out the rest of the blog HERE
 

 Font of Choice, I used leaf 1

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

This is a quickie one

Open a new image 800 x 800 or one you prefer, paste paper 3,  resize your mask down to 85%, apply, delete and merge group.

Paste the scatters on the mask layer.

Paste the tree on the left side.
Paste the stairs in front of the tree.
Paste the grass in front of the stairs, move over some duplicate, mirror.

Resize your tube to 45%, place on the right side below one of the grass layers.
Paste flower 4 below the stairs on the left, duplicate, resize to 75%, move above the stairs on the left, duplicate, mirror, duplicate one of the flowers again, resize to 75%, place above the tube layer by the legs, erasing some of the stems.

Resize the hat to 50%, place on the grass on the left.
Resize the butterfly to 50%, mirror and move back to the left or place where you prefer.
Paste the mirror on the left side below the first flowers, take your free hand tool, draw around the mirror, resize your tube to 25%, mirror, paste, delete, select none, change the blend mode to overlay.

Resize coins to 25%, place on the right, duplicate and move over a bit.

Paste the sparkles a couple of times being on the top layer.

Resize shamrock #2 to 25%, duplicate once or twice and place on the grass where you like.

Resize scatter 2 to 40%, paste on the grass, below the hat, duplicate, mirror, move below the flower layer by the tube.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

So Lucky

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called lucky

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Feeling Lucky by Manipulated By Magik  HERE
Check out the rest of the blog HERE
Mask WSL_84  HERE
Filters
penta.com-Dot and Cross
xero-Porcelain
Unplugged Tools-Interlace
EyeCandy4000-Gradient Glow

Font of Choice, I used Celtic

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 4 or one of choice, apply your mask, delete and merge group.
Paste frame 5, resize to 90%, free rotate to the left at 10, duplicate, mirror, move both frames, one to the left, the other to the right until they are how you like them, then merge down.
Duplicate the frame, change the blend mode to Burn, merge down, then apply the filter
penta.com-Dot and Cross
72, 10, 2
Select your magic wand, click inside the frames, expand by 5, paste paper 2, invert delete, move below the frame.
Resize your tube to 40%, paste on the right frame, mirror the original tube and paste in the left frame, delete both, select none, merge down.
Duplicate the tubes in the frame, Gaussian blur at 4, change the blend mode to Screen.
Apply the xero filter-Porcelain and then
Unplugged Tools-Interlace with these setting 4, 24, 2, 4

Resize your tube to 33%, paste in the center on top of the frame layer.

Paste the paint splatter on the mask layer at one side, duplicate, flip, duplicate, mirror, duplicate flip and adjust all to fit your tag better.

Paste the glitter layer under your tube layer, duplicate, mirror.

Resize the mouse to 50%, mirror, paste above your tube layer on the right.
Resize the balloons to 50%, place below the mouse and make it look like he is holding them by the hand.

Resize the coin to 30%, place under the mouse, duplicate twice and move below the tube layer and one off to the right more and the other to the left more.

Resize the word lucky to 70%, paste at the bottom, apply the penta.com-Dot and Cross and then add a fat white gradient glow with EyeCandy 4000-Gradient Glow

Paste the sparkle above the paint splatters, duplicate, mirror and adjust.

Resize the leprechaun on a horseshoe to 40%, place on the left below the wordart.
Resize the goodie bag to 50%, place on the left below the tube layer.
Resize the clover scatter to 50%, place on one side of the frame layer, duplicate, mirror.
Resize the winged shamrock to 50%, place on the upper left on the frame.

Resize bow 3 to 50%, paste on the upper right corner of the frame.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Lucky

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Lucky Enough by Horseplays Pasture Design  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE
 

 Font of Choice, I used Celtic

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete and merge group, resize larger to 105%, then paste paper 1, apply the mask again, merge down.
Paste the wire on the mask, change the blend mode to Luminance (L).

Paste frame 8 on the wire layer, resize larger to 110%.

Paste frame 4, click inside with your magic wand, expand by 5, paste paper 3, invert, delete, select none, move below the frame.

Being on the top frame layer, resize your tube to 45%, paste on the right side.

Paste the Gold at the bottom, duplicate twice, move one over to the right and the other over to the left.

Paste the word Luck on top of the gold layers.
Resize the horseshoe to 45%, free rotate to the right at 20 degrees, duplicate, mirror, moving both below the gold layers.

Corner flower line, free rotate at 90 to the left, move to the bottom below the tube layer.

Paste flower 3 below the corner flower layer on the right, duplicate, mirror, move down some and erase any stem showing below.
Resize flower 1 to 85%, paste on the paper layer below the window, sharpen once.
Resize the original flower 1 to 70%, paste above flower 3 layer on the left, sharpen once, duplicate, mirror.


Resize the leaf vine to 25%, paste below the corner flower layer on the left, duplicate, mirror, duplicate again and move over some.

Resize the dragonfly to 30%, place where you like, duplicate and mirror and place again where you like.

Resize clover 1 to 20%, paste on the gold coins, duplicate a couple of times, place where you like.

Resize the bird to 30%, place where you like, I placed mine on the wordart.
Resize the butterfly to 15%, free rotate to the left at 25, place where you like, duplicate, mirror.

Resize ribbon 2 to 80%, free rotate to the left at 90, place below the gold coins at the bottom, duplicate, mirror, move up some.

Resize bow 4 to 15%, place on the letter K of the wordart.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Irish Girls Rock Forum Set

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.
Tube is called St Patrick Babe
 

You can find his art at his store HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Andrew Filters #44-Fabric Wrapper
Mura Meister-Copies
Xero Filter-Radiance
UnPlugged Tools-Interlace

Font Worstveld for name
Oh la la for pixel workart
 

Drop Shadow usually V2 H2 50 black or
whatever one you prefer

Let's get started

*Remember to add your drop shadow as you go along*

I took an old tut I did and revamped it.

Open a new image, 600 x 250 and fill with color of choice, I used #7eac7d.
 
Paste your tube and apply Mura Meister-Copies-Wallpaper rotate at default settings.

Apply Andrews Filter #44-Fabric Wrap at default settings.

Then go to Adjust, Blur, Radial Blur with these settings
Twirl, 50, 10 0, 0, 10, Elliptical checked.
Then apply Andrew Filter #44 again, change the blend mode to overlay.
Now apply Unplugged Tools-Interlace with these settings, twice.
5, 20, 1, 0

Take your selection tool and draw out a small rectangle about half way across, add a new raster layer and fill with #56944c, Effects, Edge effects, enhance, select none.

Type out your wording of choice, I typed out Irish Girls Rock, using Oh la la for the wording, set on 10 Pixels and the Bold button pushed in, merge down, duplicate and move one to the left side top and the other to the right side bottom.

Paste your full tube and move below the rectangle layer, duplicate and move to the other side, merge these together, change the blend mode to overlay or one you prefer, apply Mura Meister Copies-*Line, with the 1/n Fade out checked.
Apply xero filter-Radiance.

Paste your medium size tube in the center and adjust to your liking.
Duplicate, gaussian blur at 4, change the blend mode to overlay, merge down, then merge visible and add AAA Frames-Foto frame with these settings
4, 0, 0, 3,
0, 0, 0, 50
Add your copyright and name.

For the Avator
Open a new image 150 x 150 or a size of your choice.
Paste your tag and resize to 70% and place how you like it.
Apply the AAA Frames-Foto frames with same settings as before.
Be sure all copyrights have been added to your tag.
Add your name and that is it

Hope you enjoyed doing this tut.

Here is the original I did back in Feb 23, 2013 using Danny Lee when he was at Scrap and the City.
Now you can find his art at Scraps N Company HERE