Dreaming the Dream

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim.

This is an Exclusive at PFD called Anna.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Dreamscape by Melissaz Creationz  HERE
Check out the rest of the blog HERE
MPM Mask 7  HERE
Check out the rest of her blog HERE

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 2, apply your mask, delete and merge group, apply mask again, delete and merge group. This helps to eliminate the straight line at the top.

Paste element 02 and move to the bottom.
Paste element 33, move below the wordart, duplicate, mirror, adjust.

Resize element 28 to 90%, paste below the grass layers.

Resize element 09 to 70%, paste on the right side above the mask layer, change the blend mode to Luminance (L).
Click inside with your magic wand, expand by 5, paste paper 05, invert, delete, move below the frame, then mirror your tube, paste, delete, select none.
Duplicate your tube, Gaussian blur at 5, change the blend mode to screen or
one you prefer.

Paste element 11 below the paper layer of the frame and up on the right top.

Resize your tube to 43%, place on the wordart.

Element 30, free rotate to the left at 25 degrees, paste on the left below the fence layer.
Duplicate the sparkle layer, resize to 40%, place behind the tower.
Resize element 08 to 50%, place below the tube layer at the top by the tower, duplicate, mirror, erase the ones you do not want.

Paste element 24 on the right below the fence layer, duplicate, resize to 50%, move above the fence layer, duplicate again, mirror.

Resize element 40 to 35%, place in front of the wordart, duplicate a couple of times and place how you like, duplicate a couple more times and move below the wordart how you like.
Paste element 13 on top of the wordart.

Resize element 51 to 55%, place on the right above the tube layer.
Paste element 15 below the tube layer on the left.

Resize element 20 to 20%, place around the flowers how you prefer, duplicate, mirror and adjust.
Resize element 14 to 30%, place where you like, duplicate, mirror, move back to the right, duplicate again and place on the lower left.

Paste element 16, free rotate to the right at 90 degrees, place on the wordart and grass area.

Resize element 21 to 45%, mirror, place on the right on the wordart.

Resize element 01 to 50%, place on the right below the flower by the key.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

The New Year

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim .

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Scraps N Company  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Happy Holidays by Disturbed Scraps  HERE
You can check out her blog HERE
MC 14 Mask HERE
Be sure to check out her blog  HERE
Filters used
Xero-Clarity
Font Billion Stars
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.

Paste paper 01 and apply your mask, invert, delete and merge group. Resize your mask later if needed to fit your tag better.

Paste HH048, the piano and move to the left.

Paste your tube and resize as needed, if using the one I am, I resized mine to 45% and place on the right.
Duplicate the tube, go to Adjust, Blur, Gaussian blur at 3, change the blend mode to screen or one you prefer, merge down.
Apply the Xero Filter, Clarity.

Paste HH 052 and place below the piano layer and go to Adjust, Hue and Saturation,  colorize and have both on 0.

 Paste HH019 below the piano layer on the right, resize to 95%.

Paste HH051 below the tree layer on the right and move up some, go again to Adjust, Hue and Saturation, colorize with both numbers on 0.

Paste HH 054 and move below the new year ball and colorize the same, duplicate, mirror, move below the clock layer and up some, erase the post showing at the bottom of the piano.

Paste HH 037 on the upper left just above the mask layer and colorize like before with both numbers on 0,  add noise at 35%, duplicate, mirror, duplicate again, move back to the center, below the mask layer and move down some.

Paste HH 044 and take your free hand tool, draw around the red heart and delete, then resize to 45%, place below the tube layer by her shoe.
Resize HH 045 to 55%, place below the glasses. The gift boxes will cover the number 3 on the champagne bottle.
Resize HH 06 to 55% and place to the left of the glasses and below that layer.

Resize HH 027 to 55%, free rotate to the left at 25 degrees and place below the ornament layer and move over to the left a bit.

Paste HH 015 below the tube layer and move to the left over the piano and light post, duplicate, mirror and move up a bit on the tree.

Resize HH 010 to 75%, place on the right below the sparkle layer on the tree, duplicate and move over to the left more and cover the number 3 on the bottle.

Resize HH 042 to 40%, change the color to the same you used before, then place on the left side below the piano layer and hide the last part of the numbers.
Resize HH 031 to 50%, place by the piano leg below the sparkle layer, duplicate the shoe and move back by the first shoe.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.

It's Easter Time

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim.

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
It's Easter Kit by Clarez Creationz  HERE 
Rocked by Rachel Mask Set 11-#3 Mask HERE
Xero Filter-Soft Vignette
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later.

Paste paper 18, apply your mask, delete and merge group.
Resize larger to 110.

Paste frame 5, click inside with your magic wand, expand by 5, paste paper 1, invert, delete and move below your frame.

Paste frame 6 and move below the paper layer.

Resize element 46 to 85% and place on the left side, then go to Image, free rotate, rotate to the left by 10 degrees.

Paste and resize your tube, I resized mine to 50%, place more toward the right side.
Apply the Xero Filter-Soft Vignette.

Paste and resize element 57 to 50% and place on the left side by your tube.

Resize element 49 to 70%, place below the rabbit layer.
Resize a couple of the eggs to 40%.
Place on your basket and erase the part over the basket, or you can move below your basket and take your free hand tool and draw around the basket on the part of the egg you do not want to show and delete, then move the egg above the basket layer. (Makes sense I hope)

Paste a couple of eggs again, resize to 20% and paste in front of the basket how you like them. Duplicate a couple and free rotate them how you like. Play around with the eggs and place them in different areas of the basket etc.

Resize element 09 to 40%, place on the right side below the tube layer.
Resize element 33 to 30% and place under the bow and adjust, erase any of the ribbon you do not want to show.
Duplicate a couple of times, resize the first one to 80% and move down, duplicate that one and resize again to 80% and below the last one.
Resize element 32 to 20% and place on top of the bow, sharpen once.

Resize element 31 to 40%, free rotate 15 degree left and place below the rabbit layer and place on the left side, duplicate, mirror, move below the basket layer and move back to the left side more.

Resize element 39 to 30%, duplicate and place on the sign where you like them.
Duplicate one of them again, resize to 30% and place on the rabbit.

Paste element 47 just above the mask layer, duplicate, mirror and adjust to your liking.

Resize element 19 to 50%, place on the paper layer in the frame, and adjust.

 Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.