Kisses

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Spazzd Art.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Spazzd Art Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap My Little Valentine by Bitzy Beez Designz  HERE
Check out here blog  HERE

RR Set Mask_2-1  HERE

Xero Filter-Soft Vignette
Mura Meister Copies-Encircle

Font of Choice,

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 700 x 700
Paste paper 4, resize to 95%, apply your mask, delete and merge group.

Paste frame 6 or one you prefer, click inside with your magic wand, expand by 5, paste paper 13, invert, delete, do not deselect yet.
Resize your tube to 75% if using the same one I am, paste, delete, select none.
Apply Xero Filter, Soft Vignette with these settings
Gradient shape, Diagonal 1, invert checked.
Effect Type-Foreground colour
Diagonal Dots, 0, 0, 0, 255

Resize your tube to 17% and place on the left side.

Resize the leaves 2 to 40%, erase the stems and the one leaf on the right side.
Apply Mura Meister Copies-Encircle at default, move below the paper layer of the frame.
Paste heart link 3, resize to 90%, place above the leaves layer.

Resize drink 2 to 60% and place on the right side. Resize drink 1 to 50% and place by the first glass.

Resize cupcake 2 to 20%, place by the glass.

Paste wordart 4, resize to 37%, place at the bottom of the frame.

Paste candy box 4, resize to 35%, place on the left below the tube layer.

Resize note 3 to 25%, place on the upper right on the heart.
Resize the lipstick to 20%, place on the left by the candy box.

Resize hearts 2 to 40%, take your free hand tool, draw around a couple of them, copy and paste as many times as you like and place where you like.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Feel Your Boobies

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Spazz .

You need a license to use this art work. Please do not use without a license.

 You can find this art at Spazzd Art Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Made By Justine BCA at CM  HERE
Scroll down a little bit to get to her kit.
Template BC 4 by Tamie HERE
Millie's PSP Madness Mask 54  HERE
Filters
EyeCandy 5 Impact-Chrome or EyeCandy4000-Chrome (Optional)
EyeCandy4000-Gradient Glow
Xero-Clarity
Font dDAFt-UPPER case for the name
 

Drop Shadow usually V2 H2 50 black

Open the template, duplicate and delete the credits, then go to Image, canvas size and as usual mine is 800 x 800.

Paste paper of choice and apply your mask, delete and merge group. Resize your mask large to fit the template and move to the bottom of the template layers.

Starting on the bottom, with raster 5 of the template, apply EyeCandy 5, Impact-Chrome, go to Basic tab and set it to indoor office space,
8.44, 64, 22.33, 0
Inside Selection checked.

Then recolor it by going to Adjust, Hue and Saturation, colorize with these settings
Hue 230,  Saturation 118.

Select raster 6, new layer, fill with #f361a8, select none, then go to Effects, Textures effects, Weave with these settings
1, 10, 1, both colors set on white.

Raster 4, select, paste paper 3, invert, delete. Apply EyeCandy 4000, gradient glow on  medium gradient in white at width of 10. Lower your opacity of your drop shadow for this to about 30.
Raster 3 of the template, paste paper 5, invert, delete.
Raster 2, paste paper 8, invert, delete.
Raster 13 apply the gradient glow but change the color to a pink.

Raster 1 apply EyeCandy-Impact-Chrome with the same settings as before, and recolor the same.
 Take your magic wand, click inside Raster 7, expand by 3, resize your tube first.
If using the same one I am, I resized it to 90% first and then paste, invert and delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur set on 4, change the blend mode to Screen and sharpen, then apply the xero filter, Clarity.

Raster 7, paste paper 8, invert, delete,  apply a slight inner bevel to the paper with these settings, go to Effects, Inner Bevel,
Bevel 2, width 4
15, 3, 4, 0
48, 36, 42 color white
Paste the sparkle element and place how you like it.
Paste the staple, on the lower left and then duplicate and move up and over some, refer to my tag for placement, then recolor with the Hue and Saturation as before.

Resize your tube to 45%, if using the same one I am and place on the right side under the wordart layers. Apply the xero filter-Clarity to the tube.

Resize the cupcake to 40%, place on the left side.
Resize the tennis shoes to 40% and place on the left side also.
Resize the teddy to 40%, place on the right bottom side to cover the legs of your tube.
Resize label 1 to 40%, place at the top, just left of your tube.
Resize lips 1 to 20%, free rotate to the right at 15% and place by the label.

Resize bow 1 to 40%, free rotate to the left at 10 and place on the upper left on the frame.

Add the Inner Bevel setting as before to your pink wordart, then add noise to the white background of the wordart at 60%.

Add any other elements that you would like, once happy, close off any background and merge visible.
Resize first, then add your Copyrights and name and that's it.
 

Hope you enjoyed doing this tut.
 

Fire Babe on Duty

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Spazz .

You need a license to use this art work. Please do not use without a license.

 You can find this art at Spazzd Art Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Fire Sampler by PST Design  HERE
Rocked by Rachel Masks, Set 13-1  HERE
Font Cheap Fire
 

Drop Shadow usually V2 H2 50 black

Open a new image to a size you prefer, mine is 800 x 800.

Resize paper 2 to 23%, paste and apply mask 13-1, delete and merge group. Resize mask larger to 135%, duplicate and merge together.

Resize element 04 to 22% and paste on mask.

Resize your tube to 75% if using the same tube as I am.
Paste on the brick wall, then select the wall, float, defloat, invert and being on the tube, delete, select none.
Blend mode Normal, lower the opacity to about 55%.

Resize element 06 to 20%, free rotate to the left at 20 degrees and move below the mask layer.

Resize element 01 to 15%, being on the top layer, paste on one side, duplicate, mirror and adjust them where you like them.

Resize your tube to 20% and place where you like it.

Resize element 05 to 15%, place behind your tube layer and move to one side or the other.

Resize element 07 to 17% and place on the right side.

Resize element 02 to 8%, place by your tube on the left, duplicate and move over by the ladder.

Resize element 10 to 10%, flip, move by the nozzle of the water hose to make it look like the water is coming out of it, duplicate, flip, move below the tube layer and up a bit.
Duplicate again, free rotate to the right at 90 degrees and move below the truck layer by the bottom of the truck and duplicate again and move over some.

Add any other elements that you would like, once happy, close off any background and merge visible.
Resize first, then add your Copyrights and name and that's it.
 

Hope you enjoyed doing this tut.