Cute As A Bunny

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria.

The tube is called Bunny.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Cute As a Bunny by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Melissaz Creationz Mask 1  HERE

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 11, apply your mask, delete and merge group.
Resize your mask larger to 125% or so to fit your tag better.

Paste element 05, resize to 85%, move down some.
Paste element 06, at the bottom of the frame, resize to 85%, duplicate twice, mirror one and move the other to the center.
Click inside your frame layer with your magic wand, expand by 5, paste paper 3, invert, delete.

Resize your tube to 25%, if using the same one, place on the grass layer.

Paste element 07 above the mask layer on the left, resize to 85%.

Paste element 02 below the tube layer on the upper right, resize to 90%.

Paste element 20 above the frame layer on one side, resize to 85%, duplicate, mirror, duplicate one, resize to 85%, move to the center area where you like.

Resize element 40 to 65%, place below the tube layer at the bottom of the frame, duplicate, mirror.
Resize element 17 to 65%, place above the grass layers, duplicate as many times as you like and place where you like.

Paste element 25 above the tube layer on the grass.
Paste element 27 below the rabbit.

Resize element 24 to 50%, duplicate a couple of times and place where you like.

Resize element 09 to 40%, paste on the basket, erase the loop part.

Resize some of the eggs to 50%, place on the basket, take your free hand tool, draw around the bottom half of the eggs and delete, making them look like they are in the basket.
Paste element 32 and 33 above the basket layer at the bottom.

Resize element 29 to 50%, paste below the basket behind the eggs, duplicate, move over to the right and below the grass layers.

Resize element 08 to 50%, place just above the grass layers, duplicate once or twice and move where you like.
Resize element 19, resize to 50%, duplicate, place where you like.

Paste element 10 on the mask layer, duplicate, mirror, flip and adjust both to your liking.

Paste element 21, duplicate 3 times, moving one down, one up and one more in the center.

Resize element 23 to 50%, duplicate, place on the grass layers.

Resize element 13 to 50%, place by the grass on one side, duplicate, mirror, duplicate again, move more to the center.

Resize element 28 to 50%, place by the basket on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Happy Easter

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called LuLu.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Template by Fired by Flamin HERE
You can DOWNLOAD the template HERE

 Scrap Happy Easter by Kittz Kreationz  HERE
Check out the rest of the blog  HERE
 WSL_Mask 84 HERE

  Font of Choice, I used Yaquote Script

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit d to duplicate and close the original, delete the credits and wordart and green rectangles 1 and 2.

Make a new raster layer, fill with #6329c4, apply your mask, delete, select none, move to the bottom layer.
Paste element 16 just above the mask layer.

Paste element 4 below the yellow circle layer of the template.

Select the yellow circle on the template, go to Selections, select all, float, defloat, Modify, selection borders, number on 3, add a new raster layer, fill with white, select none, add noise at 50%.

Select the blue rectangle, add a new raster layer, fill with #6329c4, then go to Selections, Modify, selection borders, number still on 3, fill with white and add the noise at 50%.

Paste element 35 on the Pink Oval, resize to 93%, click inside with your magic wand, expand by 5, mirror your close up first, then paste, invert, delete, select none.
Duplicate your close up, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to overlay, merge down.

Resize your full tube to 90%, paste on the right side.

Paste element 14 in the center below the tube layer at the bottom, resize to 55%.
Resize element 43 to 75%, paste on the left side.
Resize element 30 to 65%, place on the right below the easter egg wordart layer.

Resize element 23 to 35%, place on the left by the basket.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Some Bunny Loves You



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Floppy Ears and Fluffy Rears by HPD HERE
MC Mask 10 HERE
Xero Filter-Soft Vignette, Clarity
Font of Choice, I used Billy Argel Font

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste paper 13, apply your mask, delete and merge, enlarge up
to 130, unless starting with a smaller new image then resize as needed.

Paste element 14, click inside with your magic wand, expand by 5,
paste paper 9, invert, delete, move below the frame, do not deselect yet,
paste your close up, move where you like, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, with the number on 5,
change the blend mode to screen or one you prefer, merge down.
Apply the Xero Filter-Soft Vignette
Elliptical
Background color
Vertical lines
1, 0, 0, 255

Resize your tube to 75%, if using the same one, place on the left side.

Resize element 66 to 70%, place inside the frame above your
close up tube, then take your pick tool and adjust inside the frame.
Then apply the Xero Filter-Clarity to the wordart.

Paste element 19, place below your tube layer, duplicate and move
over more.
Paste element 68 above the grass layer, move to one side,
duplicate, mirror.
Paste element 67 in the center under element 68.

Resize element 23 to 50%, mirror, place below your tube layer,
duplicate, move above the tube layer, erase the back end of the rabbit.

Resize element 24 to 65%, place on the right side.

Resize element 61 to 75%, paste on the right, above the wordart layer,
duplicate, mirror, adjust and erase any of the stem showing
at the bottom.

Resize element 56 to 45%, place on the right above the grass layer,
duplicate, mirror, adjust behind your tube.

Resize element 15 and 17 to 20%, place by the leg of your tube, below the rabbit.
Free rotate either one to 90 degrees to the right.
Duplicate both and move to the below the scatters layers and place
how you like them.

Resize element 47 to 30%, duplicate once or twice and place how you like.

Paste element 69 and 71 just above the mask layer, arrange them
how you like and erase the parts you do not want showing.
This is where you just play around with these to get the look you want.
Duplicate as many times as you need.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Bunny Girl

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Eggs-ellent Spring Collab Scrap Kit by Gold Dust  HERE
(No longer Available) Easter Template by Fired By Flamin  HERE
Trese Mask 0113 HERE
Look on the left for the list of numbers for the masks.
Xero Filter-Soft Vignette
Font of Choice, I used Andes

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your Template, hold the shift key and hit the letter d
to duplicate, close the original, delete the credits.

Paste paper 4, apply your mask, delete and merge group,
move below all the template layers.

Merge the 2 green squares together, select, float, defloat,
paste paper 2, invert, delete, select none.
Delete the template layer also.

Select the Blue Oval, paste paper 9, invert, delete.
Select the Blue Oval border, go to Adjust, Hue and Saturation,
colorize, change the numbers to
Hue 226, Saturation 128
Apply an inner bevel to the frame with these settings,
Bevel shape 2,
8, 2, 4, 0
48, 36, 42
color white
Paste frame 9, free rotate to the left at 90,
resize to 68%, paste below the blue oval.

Yellow rectangle, leave as is or paste a paper of choice.

Merge the 3 Pink rectangles together, select all, float, defloat,
paste your medium size tube on the left pink rectangle, invert, delete,
select none, erase any part from the first tube showing in the center rectangle, duplicate, mirror and place on the right side rectangle, merge down.

Duplicate the tubes, go to Adjust, Blur, Guassian blur at 4,
change the blend mode to screen.

Apply the Xero filter, Soft Vignette, change the pattern shape to
Diagonal Dots, repeats 1, leave all else as is.

Paste your tube and move toward the bottom, paste grass 1 below
your tube layer, erase the blunt edges on each side of the tube.

Position the wordart how you like, I placed mine just under the tube layer.
Add the Hue and Saturation as before to change the color of the wordart.
Add a white fat gradient to the wordart.

Paste the fence cluster below the 3 Pink rectangles.

Resize the birdhouse 1 to 45%, place in the center pink rectangle below
the grass layer.

Resize basket 2 to 45%, paste below the tube layer on the right.

Resize eggs 1 to 30%, place on the left below the tube layer.

Resize chick 2 to 30%, place on the left in front of the tube.

Resize flower 8 to 30%, place on the left below the egg layer, duplicate,
move below the grass layer and place how you like.

Paste the sparkles on top of your tube layer.

Resize butterfly 1 to 30%, place at top left, duplicate, place on the left by the flowers, duplicate, mirror  and place where you like.

Resize the sun to 45%, place at the top left side.
Add any other elements you would like, make it your own.

Resize the swirly plant to 50%, place on the left below the yellow
rectangle and up some, duplicate, mirror and adjust.

Resize scatter 2 to 80%, paste just above the mask layer on one side,
duplicate, mirror.

Resize egg pops to 20$, place between the wordart words and above
the tube layer.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

It's Easter Time

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim.

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
It's Easter Kit by Clarez Creationz  HERE 
Rocked by Rachel Mask Set 11-#3 Mask HERE
Xero Filter-Soft Vignette
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later.

Paste paper 18, apply your mask, delete and merge group.
Resize larger to 110.

Paste frame 5, click inside with your magic wand, expand by 5, paste paper 1, invert, delete and move below your frame.

Paste frame 6 and move below the paper layer.

Resize element 46 to 85% and place on the left side, then go to Image, free rotate, rotate to the left by 10 degrees.

Paste and resize your tube, I resized mine to 50%, place more toward the right side.
Apply the Xero Filter-Soft Vignette.

Paste and resize element 57 to 50% and place on the left side by your tube.

Resize element 49 to 70%, place below the rabbit layer.
Resize a couple of the eggs to 40%.
Place on your basket and erase the part over the basket, or you can move below your basket and take your free hand tool and draw around the basket on the part of the egg you do not want to show and delete, then move the egg above the basket layer. (Makes sense I hope)

Paste a couple of eggs again, resize to 20% and paste in front of the basket how you like them. Duplicate a couple and free rotate them how you like. Play around with the eggs and place them in different areas of the basket etc.

Resize element 09 to 40%, place on the right side below the tube layer.
Resize element 33 to 30% and place under the bow and adjust, erase any of the ribbon you do not want to show.
Duplicate a couple of times, resize the first one to 80% and move down, duplicate that one and resize again to 80% and below the last one.
Resize element 32 to 20% and place on top of the bow, sharpen once.

Resize element 31 to 40%, free rotate 15 degree left and place below the rabbit layer and place on the left side, duplicate, mirror, move below the basket layer and move back to the left side more.

Resize element 39 to 30%, duplicate and place on the sign where you like them.
Duplicate one of them again, resize to 30% and place on the rabbit.

Paste element 47 just above the mask layer, duplicate, mirror and adjust to your liking.

Resize element 19 to 50%, place on the paper layer in the frame, and adjust.

 Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

Easter Bonny

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Bits N Bobs.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Spring A Ling kit by Vesta
HERE
Template #226 by Millie HERE
Rocked by Rachel Mask Set 11-#1 Mask HERE
Xero Filter-Soft Mood, Clarity and Mistifier
penta.com filter-Dot and Cross
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the d key to copy and close the original.
Go to Image, canvas size and resize it to 800 x 800, can resize later.
Delete the credits, and layers 7, 8, 9, and 10.

Paste paper 8, apply your mask, delete and merge group, resize larger to 125 and later if you want it to show more, grab your Pick tool and pull it out more.

Merge layer 2 down with layer 1 on the template, select all, float, defloat, paste paper of choice, I used #7, invert and delete. Delete your template layer also, and select none.

Merge layer 4 down with layer 3, select all, float, defloat, resize paper 2 down to 23%, paste, invert and delete, select none.

Select layer 5, paste paper 8, invert and delete.

Select layer 6, float, defloat, add a new raster layer, fill with #f0b6df, then paste your close up tube, place how you like it, invert and delete, select none.
Apply penta.com filter-Dot and Cross to the paper.
Apply the Xero Filter-Soft Mood first, then Clarity and then Mistifier to your close up tube.

Paste frame 6 above the close up layer and using your Pick Tool, adjust the frame to fit around the oval shape of the template layer.

Copy and resize your tube as needed and place on the left side.
Apply Xero Filter-Clarity.

Paste and resize element 5 to 85%, place at the bottom, just below your tube layer.

Resize element 1, 58 and 60 to 50% and place where you like, duplicate once or twice, resize one or two to 75% and place where you like. Play around with them to get the look you want.
I placed mine below the grass layer.

Resize the wordart to 55% and place on the grass layer toward the right side.

Resize element 46 to 35%, place on the left side by the tube.
Resize element 47 to 25%, mirror, place a bit behind the wordart layer, resize again to 65% and place on the wordart sign.

Resize element 42 to 25%, duplicate a couple of times and place them where you like them.

Resize element 8 to 40%, place at the top left side below the frame layer.
Resize the tree to 75%, place on the right side just above the 2 rectangle strips.

Resize the sparklies n bubbles to 90% and place just below your tube layer.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

Happy Easter

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
This was part of a Blog Train.
Scrap O' Blog Train
Spring Time kit by Tasha Playground
HERE
Rocked by Rachel Mask Set 9-#3 Mask HERE
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper 2, apply your mask, delete and merge group.
Adjust with your pick tool later.

Paste frame 1, lower opacity to 75% or what you like.

Resize and paste your tube as needed, if using the same one I am, I resize it to 50%.

Paste the flower element on the right side, duplicate mirror, move below your tube layer on the left side.

Paste the grass on the right side below the flower layer, duplicate, mirror, move below the flower layer on that side also, duplicate, resize to 50% and place behind the tube where you like it.

Being on the top layer, paste the swoosh element on the right side, duplicate, mirror and move below the flower layer on the left side.

Paste and resize the rabbit to 50%, move below the tube layer on the right side, duplicate, mirror and move up behind the tube layer as if looking over her.

Paste the greenery just above the mask layer on the bottom.
Paste the ladder on the left side just above the frame layer.

Paste the butterflies and resize to 50%, duplicate and place where you like them.

Resize the branch to 50%, move above the grass layers, duplicate a couple of times, place how you like them, may have to mirror one or two also.

Resize flower 2 to 50%, place on the left side just above the ladder layer and out where you can see it a bit, duplicate and mirror.

Then decide to add the close up to the mask, select the mask layer, select all, float, defloat, paste your close up, I mirrored mine first, invert and delete. change blend mode to soft light.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

My Fuzzy Bunny

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

You need a license to use this art work. Please do not use without a license.

You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Fuzzy Bunny by Amy & Leah Gimptastic
HERE
xero filter-Porcelain and Mistifier
Mura Meister Filter-Encircle
WSL_Mask 84 HERE
Font aka Dora 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste frame 4, click inside with your magic wand, paste your close up tube, invert and delete and paste a paper of choice, delete and select none.
Moving both below your frame layer.

Duplicate your close up, go to Adjust, Blur, Gaussian blur and change the radius to 4, then blend mode to Overlay or one you prefer, then merge down.
Apply the xero filter-Porcelain first, then Mistifier, changing the haziness to 140.

Paste your tube toward the bottom on top of the frame layer.

Paste the deco and resize to 55%, apply Mura Meister filter, Encircle and move below the paper layer.

Resize the wordart to 85% and place at the bottom part of your tag.

Resize the bucket to 50%, place on the left side behind your tube layer.

Paste and resize the egg to 40%, place on the right side, below your tube layer, duplicate, Image, free rotate to the right and move over a bit and below the first egg.

Resize the broken egg to 40% and place on the right in front of the other eggs.

Paste the grass just above your tube layer and move the broken egg above the grass layer, duplicate and mirror.

Paste paper 4, apply your mask, delete and merge group, then resize it up to 145% and move to the bottom layer.

Resize flower 2 to 15%, duplicate a few times and place on the grass in different areas.
Resize flower one to 15%, duplicate and place how you like them.

Place the ribbon at the bottom, just above the frame layer, duplicate and mirror, adjust to your liking.

Resize the butterfly to 50%, free rotate to the left at 10 degrees and place where you like it, then duplicate and mirror.

Resize the bow to 85%, place at top of frame, then go to Adjust, Hue and Saturation, colorize
H 226,  S207.
Resize the bead to 50% and place in the center of the bow.

Resize the leafs to 75% and place where you like below the other layers, duplicate and mirror and move around.

Paste the rolled paper and place above the ribbon layer, duplicate and mirror, adjust as needed.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.

Can I Be Your Bunny

 

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Snuggle Bunny by Amy & Leah Gimptastic
HERE
xero filter-Soft Mood
WSL_Mask 208 HERE
Font Happy Easter 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste frame 5, then paste frame 3. Add your drop shadow on the drop frame, then change the setting to V-2, H-2 and apply again, then merge down.

Click inside with your magic wand, expand by 5, paste paper 10, invert and delete, select none.
Move below the frame layer.

Paste the element lace and move below the paper layer and to the top, duplicate, flip, duplicate again go to Image, free rotate, rotate to the left at 90 degrees, duplicate and mirror.
Make any adjustments of the laces and then merge the lace layers together.
Add a drop shadow of V2, H2 and use the color of the paper for the drop shadow.

With your magic wand, click inside the frame and expand by 2 and paste your close up tube, invert and delete.
Change the blend mode to Luminance (L) and apply the xero filter- Soft Mood first and then Mistifier.

Being on the top frame, paste your tube and place on the right side.

Paste the wallet and resize to 75% and place on the left side.
Paste the boxes and resize to 70% and place below the wallet on the left side.

Paste the EggPop, resize to 75%, free rotate to the left at 10 degrees and move below the box layer.
Duplicate, mirror and move back to the left side and adjust.

Copy and paste the sparkle layer just below the tube layer on the right side, be sure to check if any needs to be erased on the bottom area.

Resize the Cute Bunny to 75% and place on the right side.

Using your font, type out Can I be your at 48 pixels, then change it to 72 and type out Bunny, merge down, select all, float, defloat, expand by 2, new raster layer, fill with a darker color and move below, add your drop shadow, then moving to the top word layer, merge down.

Resize the Bunny mask to 25% and place on the right side above the wordart, duplicate, mirror and move to the upper left of the frame.

Copy and paste the pom poms and move just above the boxes on the left side.

Paste paper 4, apply your mask, delete and merge group, resize mask up to 140 and move below the lace layer.

Paste the Scatters just above the mask layer, duplicate, flip and mirror.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.