Happy New Year 2017

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Andy Cooper.

The tube is called Goldensphere.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at S&CO Store  HERE
 

 Supplies Needed

I used PSPX...but any of them should work.

 Scrap Happy Holidays by Disturbed Scraps  HERE
You can check out her blog HERE
DD Patriotic Mask_3  HERE

Check out the rest of the blog HERE

Filters

Xero-Artworx

 

Font of choice, I used Atelier Omega

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 50
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 10, apply your mask, delete, merge group.

Resize element 62 to 70%, free rotate to the right at 110 degrees, go to Adjust, Hue and Saturation, Colorize, both numbers on 0, duplicate the frame, change the blend mode to burn, merge down.  Apply the xero filter-Artworx to both frames then merge down.

 

Clip inside with your magic wand, expand by 5, paste paper of choice, invert, delete, move below the frame, paste your close up, delete, select none.

Duplicate the tube, Adjust, Gaussian Blur, Blur at 4, change the blend mode to overlay.

Apply the xero filter-Artworx to the bottom tube, then back on the top one, merge down.

 

Resize your full tube to 65%, paste on the left above the frame layer.

 

Paste element 20 below the tube on the left.

 

Resize element 8, 11 and 12 to 55%, place below the tube layer where you like.

Paste element 45 to 55%, paste below the package to cover the year, duplicate, free rotate to the right at 90 degrees.

 

Element 44, erase the heart, then resize to 55%, place in front of the rotated bottle on the right.

Resize element 52 to 70%, place on the right below the bottles.

Resize which ever ornaments you would like to 40%, duplicate and place where you like.

 

Paste element 37 above the mask layer at the upper right, duplicate, mirror, adjust.

 

Wordart element 69, take your free hand tool, draw around the heart and delete, resize to

65%, add a white drop shadow with the numbers V-2, H-2, 100, 0.

 

Paste element 54 below the tree on the left and adjust to your liking.

 

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Autumn is Here

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Andy Cooper.

The tube is called Fall Scarf

You need a license to use this art work. Please do not use without a license.

 You can find this art at ScrapNCompany Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Autumn is Here by Elli's Creations  HERE
Check out the rest of the blog  HERE
Gems Mask 171  HERE
Check out the rest of the blog HERE

Font of Choice, I used Watermelon Script

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete, merge group.  Resize mask larger to 145%.
Paste element 47 on the mask layer, adjust to fit your tag later.

Paste element 19, move up some, duplicate, move down more.

Resize element 2 to 95%, paste at the bottom part of the gravel layer.

Paste element 18 on the path layer.

Resize element 6 to 75%, paste behind the wall so the trunk of the tree shows thru the window, duplicate, mirror, move below the first tree and adjust, erase any part that you do not want showing.

Resize your tube to 60%, place more to the left side.

Resize element 23 to 65%, mirror, place behind the tube on the left.
Resize element 26 to 20%, place by the tube on the right.

Resize element 75 to 55%, paste on the back wall by the open window, duplicate, resize to 75%,  move to the right corner of the wall, duplicate, mirror.

Resize element 29 to 40%, place on the right above the grass layer.
Resize element 10 to 20%, mirror, place by the sign on the right, duplicate, mirror, place below the bicycle layer on the left.
Resize element 11 to 10%, duplicate, place by the squirrel.
Resize element 14 to 40%, place above the grass layer at the bottom of the wall.

Paste element 5 on the wall.

Resize element 31 to 25%, free rotate to the right at 90, place by the foot of your tube on the left.
Resize element 33 to 25%, place at the top where you like.

Resize element 52 to 75%, paste behind your tube layer and adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name and any wordart you would like.

That's it

Hope you enjoyed doing my tut.

Winter Funtime

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Andy Cooper.

The tube is called Winter Turquoise

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at S&CO Store  HERE

 Supplies Needed

I used PSPX...but any of them should work.

 Scrap On a Winters Day by Horseplays Pasture Designs HERE
Check out the rest of her blog HERE
RD_Mask Set 101 - #1  HERE
Check out the rest of her blog HERE

 

Font of Choice, I used Christmas Snow

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 10, apply your mask, delete and merge group.

Resize element 34 to 65%, paste and move to the top more, duplicate, move down and to the left, duplicate again, mirror, merge these two together and move the first frame on top, erase the inside bars of the frames, merge down.

Click inside with your magic wand, expand by 5, paste paper 2, invert, delete, then paste your close up tube in the top center frame, delete, select none, moving both below the frames.
Change the blend mode to Luminance (L), erase the part of the tube in the lower frames.

Resize your full tube to 65%, place on the left above the frame layer.

Paste element 41 on the right side  more.

Paste element 51 and move to the bottom, duplicate, flip, move back down, erasing the straight line showing.

Paste element 31 on the left below your tube layer, duplicate, move over to the right and down to just above the paper layer in the frame.

Paste element 40 above the mask layer, free rotate to the left at 90 degrees, move to the right, duplicate, mirror.

Back on top layer, resize element 55 to 55%, mirror and place on the snow where you like.
Resize element 20 to 55%, place below the snowman on the right.
Resize element 42 to 50%, place by the tube on the left.

Resize element 50 to 50%, place on the right below the snow layer, free rotate to the right at 10 degrees, sharpen once.

Resize element 49 to 55%, mirror, place at the top of the frame.

Resize element 10 to 40%, free rotate to the left at 57%, place on the house, duplicate, mirror, free rotate to the right at 10%, adjust on the other side.
Resize element 11 to 40%, place on the house above the lights.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

If you want to Animate, keep the white background and copy merged to animation shop, come back and click on each light with your magic wand and the window also if you like, or you can take your free hand tool and draw around each one, which ever you prefer, then go to Adjust, Brightness and Contrast with these numbers,
both numbers on 10,  select none, copy merged to animation shop, paste after current frame.
Go back to psp undo select none and undo the brightness and contrast, apply this again but change the numbers to 15 and 13, copy merged to animation shop and paste after current frame being on frame 2.

Test your animation, if happy then save.

That's it

Hope you enjoyed doing my tut.

Breathless Autumn

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Andy Cooper.

You need a license to use this art work. Please do not use without a license.

 You can find this art at Scraps N Company Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Melissaz Creationz - Autumn Awaits  HERE
This scrap is part of the  Fantastically Free Sept Blog Train
Millie's PSP Madness Template 671   HERE

 Millie's Mask 85  HERE
Filters used
Unplugged Tools-Interlace
Xero Filter-Porcelain

Font of Choice, I used Great Vibes

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Duplicate your template, hold the shift key and the letter d
Close the original and delete the credits.
And as I usually do go to Image, canvas size 800 x 800.

Add a new raster layer, fill with a color of choice, I used #d0380a, apply your mask, move below all the template layers.

Select layer 1 of the template, new raster layer and fill with #d98972, delete the template layer.
Merge layer 3 down with layer 2, select all, float, defloat, paste paper 5, invert, delete, select none.

Layer 4, paste paper 6, delete the template layer.
Layer 5, paste paper 2.

Layer 6 and 8 apply Unplugged Tools Filter, Interlace with these settings
8, 70, 1, 0

Move the wordart up to the top and over to the left a bit.

Select layer 8, float, defloat, paste your closeup tube and move how you like it, invert, delete and select none.
Duplicate your closeup, go to Adjust,  Blur, Gaussian blur at 5, change the blend mode to hard light and merge down. Apply Xero filter-Porcelain and then apply the Unplugged Tool filter with the same settings as before.

Paste your tube,  and place to the right,  duplicate it, then select layer 6,  select all, float, defloat, being on the bottom tube, invert, delete, select none. Now back on the top tube and erase the leg area and part of the dress.
Apply Xero filter-Porcelain to both tubes.

Resize element 11 to 70% and place below the tube layer by the hand on the right.
Resize element 10 to 60% and place by the other pumpkin.

Paste element 28, move below the tube layer on the right and place how you like.
Duplicate , mirror and move one below layer 8 and duplicate again and move up and just above the mask layer.  Duplicate again resize to 75%, place below the pumpkin layer on the right side.

Resize element 23 to 70%, paste in the middle.

Resize element 8 to 50%, place below the tube layer a little to the left.

Resize element 7 to 40%, place on the left side, duplicate, mirror and move up on the tree on the right side.

Paste element 18 below layer 6 and 8, mirror one and place how you like them then duplicate one or two more times and place in different areas.

Resize element 19 to 75%, place on layer 7 and adjust to your liking.

Resize element 4 to 60% and place on the left lower side.

Paste element 21, free rotate to the left at 90 degrees, move to the bottom of the tag and below layer 3 of the template.

On the wordart, apply a fat gradient glow with a color of choice.
Resize element 5 to 50%, place on top of the wordart.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.