Autumn Breeze

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

The tube is 158-3

You need a license to use this art work. Please do not use without a license.

 You can find this art at CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Skys The Limit-Majestic Autumn  HERE

Check out the rest of the blog  HERE

RD Mask Set 132_Mask 1 HERE

Check out the rest of the blog HERE

Wordart by Marilyn at Creative Misfits Creations HERE

Check out the rest of the blog HERE

Scrappy Bit of Fun Animation 149 by Simone  HERE

Check out the rest of the blog HERE

Filters

Xero-Soft Vignette

Font of Choice, I used Casablanca Noir

Drop Shadow usually V2 H2 50 black

Drop shadow on this one I used V-2 H-2 Blur 15

Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste flower 6, apply your mask, delete and merge group.

Resize frame 2 to 30%, duplicate, change the blend mode to hard light, merge down with the mask layer.

 Click inside with your magic wand, expand by 5, resize paper 20 to 23%, paste, invert, delete, move below the frame and merge down with the mask layer, then paste your close up, delete, select none.

Duplicate the close up, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to hard light, merge down.

Apply the Xero filter-Soft Vignette

Elliptical, Foreground color, Diagonal Dots

1, 0, 0, 255

Duplicate the close up again, being on the bottom one, Adjust, Blur, Motion Blur,  Angle 265 at strength 100, then change the Angle to 85 and apply again. Being on the top tube, merge down.

Resize the cluster to 20%, place on the right, duplicate, mirror, duplicate, flip, move to the bottom under the other two, duplicate, mirror, adjust all to your liking.

Resize the mushrooms to 20%, place on the right just above the frame layer, duplicate, mirror.

Resize the pumpkins to 15%, paste below the blurred tube on the left.

Resize foliage 2 to 45%, paste above the mushroom layer on one side, duplicate, mirror, having this one above the mushroom also. Duplicate the left one, free rotate at 90 degrees to the right, move below the mushroom layer and up some, duplicate, mirror, duplicate the one on the right again and move up.

Resize flower 1 to 15%, place on the right below the mushroom layer.

Paste your middle size tube on the left, being on the top layer.

Resize the seed pod to 20%, place at the bottom to cover the straight cut of the tube legs, duplicate, resize to 75%, move over some and below the first one.

Resize leaf 5 to 25%, place below the green foliage on the right, duplicate a couple of times, mirror one, move the other more toward the center.

Resize butterfly 1 to 10%, free rotate to the right at 25, place on the left where you like, duplicate, mirror, place where you like on the right.

Resize the tree to 25%, paste on top of the frame layer on the left.

Resize the scare crow to 15%, place on the top layer on the right.

Resize all layers of your tag first, add your copyright and name.

If you want to animate,

merge the mask and paper layer of the frame down with the white background, copy to animation shop and make as many frames as the leaves have, which is 37.

Being on the animation first frame, go to Edit, select all, copy, then go to your first frame of

your tag, Edit, select all, paste into selected frame, paste once more but move it over some.

Then go back to psp, close off that layer and copy merged the other layers, make 37 layers again, go to Edit, select all, copy, then click on the animated tag, Edit, select all, paste into selected frame.

Test and if happy save.

If you don't want to animate,

close off any background, merge visible, resize first, add your copyright

and name, save.

That's it

Hope you enjoyed doing my tut.

Beautiful Autumn Day

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

The tube is 67-3

You need a license to use this art work. Please do not use without a license.

 You can find this art at CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Being Thankful by SD  HERE
Check out the rest of the blog  HERE
RD Mask Set 132_Mask 4 HERE
Check out the rest of the blog HERE
Filters
Screen Works-Light Gauze
Mura Meister Copies-Encircle

Font of Choice, I used Letra Hipster

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 2, apply your mask, delete, merge group, resize a bit larger to 105%. 
Apply paper 4, apply the mask again, delete, merge group.

Resize element 7 to 80%, click inside with your magic wand, expand by 4, paste your
close up, invert, delete, then paste paper 1 below the tube layer, delete, select none.
Go to Adjust, Blur, Gaussian Blur with the number on 4, change the blend mode to Overlay
or one you prefer.
Apply Screen Work-Light Gauze

Paste your full tube on the top layer and move down some.

Resize element 12 to 80%, place on the left below the tube layer, duplicate, mirror, adjust to your liking.

Resize element 26 to 40%, place on the left below the tube, duplicate, mirror.
Resize element 11 to 40%, place on the right below the tube.
Resize element 18 to 70%, place on the right below the mushroom layer.
Resize element 7 to 40%, erase the frame part, flip, move below the mushroom layer on the right, duplicate, mirror, duplicate a couple more times and move them how you like, flipping one or two.

Resize element 14 to 40%, paste below the suitcase on the right, duplicate, mirror, duplicate, resize to 75%, duplicate a couple more times and place where you like.

Resize element 15 to 55%. place at the bottom, below the suitcase layer on the right, duplicate, mirror, duplicate again and move back toward the center more, erasing any of the stem you don't want showing.

Resize element 13 to 15%, place on the mushroom on the left.
Resize element 30 to 12%, place on the right side, free rotate to the left at 20 degrees, duplicate, mirror, place lower on the left side.
Paste element 24 below the suitcase layer, free rotate to the left at 90, adjust.
Resize element 28 to 15%, place by the tube on the right more.
Resize element 27 to 12%, place next to the first cupcake.

Paste the fence just above the frame layer, move how you like, erasing some on each end until it is the way you want it.

Resize element 8 to 65%, erase the frame part, apply Mura Meister Copies, Encircle with the first number on 20, move below the mask layers.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name and any wordart you would like.

That's it

Hope you enjoyed doing my tut.

Snowflakes-3 Piece Set

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of PimUp Toons.

The tube is 206-1

You need a license to use this art work. Please do not use without a license.

 You can find this art at CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Snow Buddies by Kittz Kreationz  HERE
Check out the rest of the blog  HERE
  Template 25-Snowflakes by Dee HERE
DD Winter Mask 5 HERE
Check out the rest of the blog HERE

Filter
EyeCandy 4000-Gradient Glow

Font of Choice, I used Casablanca Noir

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original.
Delete the credits and go to Image, Canvas size 800 x 800 or a size you prefer.
Paste paper 1, apply your mask, delete and merge group, adjust to fit your tag.

On the left and right word circle add a fat white gradient glow using EyeCandy 4000,
with these numbers, 3, 25, 100
Add noise at 60% to all the white circles on the colored circles and to some of the snowflakes.
I added noise to the larger ones only.
Paste your tube under the word Snowflake and take your erase and erase some of the straight edge of the snow at the bottom.
Paste element 7 under your tube at the bottom, duplicate, flip, move back down and under the first snow layer, erase the straight edge on the top layer of snow to blend in.

Select the top right dark blue circle, select all, float, defloat, add a new raster layer, fill with
#fec4ce, mirror your tube, paste, adjust the face, invert, delete, select none, delete the template layer also. Duplicate this tube, go to Adjust, Blur, Gaussian blur with the number on 4, change the blend mode to hard light, merge down.

Select the left light blue circle, select all, float, defloat, paste your tube, invert, delete and do the blur and change the blend mode like you did on the other.

Select the top center dark blue circle, add a new layer, fill with #fec4ce, delete the template layer.
Resize element 12 to 75%, place at the top left, duplicate, move down to the lower right, add a light blue drop shadow on these, duplicate one again and resize to 55%, place at the bottom left on the snow. Duplicate more if you like and place them where you like.

Resize element 17 to 60%, place on the right above the snowflake word layer.
Resize element 22 to 55%, place on the left by the foot of the tube on the snow.
Resize element 21 to 55%, place more toward the right.

Add any other elements you would like, make it your own.

If you are going to make the signature tag and Avator do not merge yet.

Signature tag
Make a new image 600 x 250
Close your tube, the word snowflake and the lower face tube, copy merge and paste, resize to 80%.
Go back to your tag and open the word snowflake and paste, resize to 70%.
Open your tube on your tag and paste to the left.
Resize the cat to 55%, place on the word snowflake where you like.
Resize the ski bear to 55%, place on the right bottom.
Resize the cup to 55%, place by the bear, once happy, merge visible.
For the frame, AAA Frames-Foto Frame
Change the width to 0 and Matte on 2, all the other numbers are on 0, except for the
opacity it is at 100 or if you prefer lighter change it lower.
Add your copyright and name.

Avator
Make it the size your forum or group allows
Mine is 150 x 200
Copy your signature tag and paste, adjust how you like it, merge visible.
Frame for both the signature and Avator will be the same.
Add your copyright and name or initial.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name and any wordart you would like.

That's it

Hope you enjoyed doing my tut.

In Love with Snow

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

I used two different tubes from PinUp Toons

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the CDO Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap In Love with Snow by WaterLO Project  HERE
Check out the rest of the blog HERE
Toxic Desirez_Mask 1-5  I used the 3rd one down HERE
Check out the rest of the blog HERE
Animation by Simone HERE
Check out the rest of her blog HERE

 

Font of Choice, I used Christmas Snow

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Resize paper 6 to 23%, apply your mask, delete and merge group, duplicate twice and merge both down.
Resize if needed for your tag later.
Resize element 08 to 15%, apply Mura Meister Copies-Encircle with the first number on 12, paste on your mask, resizing the mask to fit better with this.
I added a white drop shadow to this also.

Resize element 68 to 20%, paste below the snowflake layer you just pasted, change the blend mode to hard light, duplicate twice and move one on each side of the center one, lower the opacity on these to 77%.
Merge these three together once happy with the way they look.

Resize element 29 to 27%, being on the top layer, paste at the bottom, duplicate twice more and move down a little more.

Resize element 30 to 35%, paste on the snow, duplicate twice and move down a bit with each one, then move the one above the bench layer.

Paste your tube below this snow layer to help hide the straight line of the legs.
Resize your other tube to 75%, paste on the right on the snow.

Resize wordart 4 to 30%, place on the upper right side, above the tube.
If you want to change the color, select all, float, defloat, new raster layer and fill with a color of choice, then add a fat white gradient glow or add a new layer, expand by 2, add white, move below and select none.
I added EyeCandy 4000-Chrome to mine and colored it a color from my tube.

Resize element 42 to 5%, duplicate mirror and place on the snow where you like.

Resize element 10 to 15%, place below the tube layer, duplicate, free rotate to the right at 40 degrees, adjust.

Resize element 01 to 7%, place on the snow on the left side, recolor to match your tube.
Resize ar4 to 7%, place in front of the tube that is sitting.

Resize 03 to 25%, paste on the top layer, then move your sit down tube above that layer.
Resize element 51 to 10%, place on the left below the bench to make it look like ice cycles are hanging from it, erase the parts you do not want showing, duplicate, mirror, move above the bench, place behind your sit down tube, duplicate a couple more times and move over more on the bench.

Resize the snowflake to 5%, duplicate a couple of times and place where you like.
Resize element 64 to 5%, place where you prefer.
Resize element 02 to 3%, free rotate to the left at 40 degrees, place by the sitting tube, recolor to a color of choice.

Resize your sit down tube to 43%, place on the bench below the poles leaning on the bench.

Add any other elements you would like.
Once happy, merge visible, resize first, then
be sure to add your copyright and name.

If you want to animate
Merge visible and take to animation shop, make 30 frames to match the snow frames that has 30.
Then go to Edit, select all, copy on the snow, then click on your tag, edit, select all, paste into selected frame, once you have it where you want click, then test your animation, if happy save.

That's it

Hope you enjoyed doing my tut.

Gotta Go Back to School

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
School Memories by Jens Sweet Temptations  HERE
Check out the rest of her blog  HERE
Template 241 by Becky HERE
Check out the rest of her blog also HERE

WSL_Mask 84  HERE
Filter
Xero-Porcelain
 

Font of Choice, I used Amplitude

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift and d key to duplicate, close the original,
delete the credits and the white background.
Go to Image, canvas size 800 x 800 or whatever size you prefer.

Paste paper 2, apply your mask, delete and merge group.

Select rectangle 2, paste paper of choice, I used paper 3, invert, delete, select none, delete the template layer also.

Leave rectangle 1 as if or paste a paper of choice.

Paste one of the lockers on the left above the slate frame layer, duplicate, mirror,
and adjust on the right side.
Add a bevel effect to the slate frame, go to Effects, inner bevel with these settings
Bevel shape 2, width 4
8, 4, 4, 0
48, 36, 42
color white
then duplicate, change the blend mode to burn on the top frame.

Select the circle fill, select all, float, defloat, paste paper one, invert, delete, now
paste your close up tube, place where you like, delete, select none.
Duplicate your close up, being on the bottom tube, go to
Adjust, Blur, Motion Blur,
Angle 315, Strength 100

Add noise on the circle trim at 50%.
On the circle frame repeat the Bevel effect as before on the slate frame, also
duplicate and change the blend mode to burn as before.

Paste your full tube and adjust how you like, moving the small wordart
more to the left side.

Book Bag, resize to 37%, place below the tube layer by the leg.
Books, resize to 40%, place by the book bag on the left.
Shoe, resize to 35%, place by the books, duplicate, mirror and move back to the left and under the first shoe.
Laptop, resize to 50%, place on the right side.
Binder 1, resize to 40%, place below the laptop layer.
Calculator, resize to 25%,  free rotate to the left at 15, place below the shoes on the left.
Notebook 1, resize to 30%, place on the left below the calculator.
Open book, resize to 35%, place above the laptop layer.
Pen 3, resize to 30%, place on the book.
Clip 2, resize to 35%, place on the school paper layer at the upper right side.
Rule, resize to 35%, place by the bag.
Paper clips, resize to 25%, duplicate, paste where you like below the tube layer.

Add any other elements that you would like, once happy with it all,
close off any backgrounds you might of had, merge visible.
Resize first then add your copyright and name.

That's it, hope you enjoyed doing my tut.
 

Snowflake Fun

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Her blog is here HERE

 You can find the kit, Scrap Zero Degrees by Clarez Creationz  HERE
MPM Mask 88  HERE

Xero Filter-Titanium and Clarity

Font of Choice, I used Flakes

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image and as usual  mine 800 x 800.

Paste ZD18 flake, click in snowflake frame and expand by 5, paste paper of choice, I used paper #2, invert and delete, select none.
 Move below the frame layer.

Paste your tube and place more to the right of the flake frame, then paste ZD08 and move under your tube, duplicate and mirror.
Adjust your tube how you like and erase the edges of the snow so it will not have a line when you add your drop shadow.
Apply the xero filter-Titanium with these settings
20, 50, 50, 127, and have subtle checked.
Then apply xero filter, Clarity, leave all the numbers as they are but check Fix saturation.

Paste ZD26 on the right side below the tube layer.

Resize ZD10 to 50% and place on the left side below your tube layer.
Resize ZD07 to 50%, place below the snowman layer and move to the right just a bit.

Resize ZD38 to 25% and place on the right side.
Resize ZD36 to 25%, free rotate to the right at 20 degrees and place behind the cup.

Reszie ZD46 to 25%, place on the snowflake frame and erase a small bit of the string to make it look like it is hanging over it.

Select the tree, float, defloat, paste ZD47 on the tree. invert, delete, paste again and place in a different area and delete again, select none.
Resize ZD34 to 50%, sharpen, add noise at 50% and duplicate as many times as you like and place in different areas on the tag. Resize again to another size and place again.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Autumn Days

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Autumn Days by Dreamland Designs  HERE

Becki's Template  #244   HERE
 Rocked by Rachel Mask Set #32_1 HERE

Font of Choice, I used Great Vibes

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Duplicate your template, hold the shift key and the letter d
Close the original and delete the credits.
And as I usually do go to Image, canvas size 800 x 800.

Paste paper 15, apply your mask, delete and merge group.
Resize the grass patch to 22%, place at the bottom of the template and above the mask layer.

Select the Bg square, paste paper 8 or one you prefer, invert and delete.

On all papers, apply this
Go to Effects, Inner Bevel with #2 bevel shape
width 2,
15, 3, 4, 0
48, 36, 42
color white
Paste paper 2 on the Lg Circle, apply the bevel.
Rectangle paste paper 4, move so the lines of the paper does not show on the rectangle, invert and delete. Apply the bevel
Med. Circle paste paper 10, invert, delete.

Select leaf 2 fill in, paste paper 11, invert, delete.
On the next leaf 2, the bigger leaf, paste paper 6.
The leaf veins on top, take your change to target brush and
recolor with #5b1a07,  or you can select, new layer and fill with a color.

The small circle paste paper 14.

Select frame 2, paste paper 19, invert, delete.
Frame 1, paste paper 6, invert, delete.
Apply the bevel as before on both frames.
Select the frame fills and fill with this color  #ece1c3.
Click inside your frame with your magic wand, expand by 10, 
 paste close up tube, delete, duplicate, go to Adjust, Blur, Gaussian blur set at 5, change the blend mode to Hard light and merge the tube down.
Do this again in the other frame.

Resize the birdhouse gate to 22%, paste above the mask layer
and erase the fence showing on the right side, duplicate, mirror and adjust, then you might need to erase some of the fence again.
Duplicate the first birdhouse gate and
bring to the top, erase most of it except for a part of
the fence to show on the left side.

Paste the chicken wire on the upper left side, above the mask layer, duplicate, mirror, duplicate again and move to the center.

Resize the floating leaves to 20%, place on the right side on the grass, erase the upper leaves, duplicate, mirror, move below the fence layer and adjust to your liking.

Resize the lamp post to 30%, place on the left below the fence layer.

Resize the pinecone and leaves to 50% and place in a couple of places where you like them, moving them down a few layers. I placed 2 of mine below the circle layers and one up by the leaves.

Add your tube and place where you like it.
Resize the rabbit to 15% and place on the right side.

Resize the apple basket to 25% and place on the left side above the grass layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Easter Bonny

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Bits N Bobs.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Spring A Ling kit by Vesta
HERE
Template #226 by Millie HERE
Rocked by Rachel Mask Set 11-#1 Mask HERE
Xero Filter-Soft Mood, Clarity and Mistifier
penta.com filter-Dot and Cross
Font Dragon Is Coming

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the d key to copy and close the original.
Go to Image, canvas size and resize it to 800 x 800, can resize later.
Delete the credits, and layers 7, 8, 9, and 10.

Paste paper 8, apply your mask, delete and merge group, resize larger to 125 and later if you want it to show more, grab your Pick tool and pull it out more.

Merge layer 2 down with layer 1 on the template, select all, float, defloat, paste paper of choice, I used #7, invert and delete. Delete your template layer also, and select none.

Merge layer 4 down with layer 3, select all, float, defloat, resize paper 2 down to 23%, paste, invert and delete, select none.

Select layer 5, paste paper 8, invert and delete.

Select layer 6, float, defloat, add a new raster layer, fill with #f0b6df, then paste your close up tube, place how you like it, invert and delete, select none.
Apply penta.com filter-Dot and Cross to the paper.
Apply the Xero Filter-Soft Mood first, then Clarity and then Mistifier to your close up tube.

Paste frame 6 above the close up layer and using your Pick Tool, adjust the frame to fit around the oval shape of the template layer.

Copy and resize your tube as needed and place on the left side.
Apply Xero Filter-Clarity.

Paste and resize element 5 to 85%, place at the bottom, just below your tube layer.

Resize element 1, 58 and 60 to 50% and place where you like, duplicate once or twice, resize one or two to 75% and place where you like. Play around with them to get the look you want.
I placed mine below the grass layer.

Resize the wordart to 55% and place on the grass layer toward the right side.

Resize element 46 to 35%, place on the left side by the tube.
Resize element 47 to 25%, mirror, place a bit behind the wordart layer, resize again to 65% and place on the wordart sign.

Resize element 42 to 25%, duplicate a couple of times and place them where you like them.

Resize element 8 to 40%, place at the top left side below the frame layer.
Resize the tree to 75%, place on the right side just above the 2 rectangle strips.

Resize the sparklies n bubbles to 90% and place just below your tube layer.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags and name.

Hope you enjoyed doing this tut.