Ready for Speed

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ted Hammond.

I am using two tubes. I bought mind when CILM was still around, but they have since closed and you can find his art at CDO now.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at CDO Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Need for Speed by Toxic Desirez  HERE
Scroll down until you see the kit name
Check out the rest of the blog HERE
Monti's Blind Mask 1  HERE
Click on Extras to find the mask
Filters
EyeCandy4000-Bevel Boss
Screen Works-Lace Screen

Font of Choice, I used Checker Hat

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste the wire and once you draw your circle, take your pick tool and make the wire a bit larger.
Click on your preset tool and select the circle one, set the width to 40, draw a circle over the wire, convert to raster layer.
Apply EyeCandy4000-Bevel Boss with these settings or play around and get one you prefer
Bevel width 5.76
Bevel Height 50,  Smoothness75,  0
Lighting
68, 73
100, 25
Highlight color white, Shadow color black
Bevel Profile
Button
Click inside with your magic wand, expand by 5, new raster layer, fill with white, apply the filter Screen Works-Lace Screen.
Paste the double flags and move toward the top more.

Paste the film strip and resize to 90%, move toward the bottom more, click inside with your magic wand, expand by 3, paste paper of choice, I used #11 and
then go to Adjust
Hue and Saturation, colorize with both numbers on 0.

Paste tire tracks 1, free rotate to the right at 45 degrees, move under the car tires,
get your Pick tool, hold down the shift key and being on the top corner square, pull down as far as you want it to be, then go to the other corner at the top and do the same until the tracks are straight under the car tires. Then pull each end out to make it a bit longer.

Paste the stop light above the filmstrip, resize to 90%, change the color of the lights to those of a regular street light colors, green, yellow and red or
if you like these colors then leave them as it.

Resize the speed sign to 50%, change the color like before with the car or leave as is and paste on the stop light post.

Paste car 2 below the double flags in the circle, resize to 50%, change the color like before, duplicate, mirror.

Being on the top layer now, paste your tube with the rim on the right side, and your other tube on the left side below the car layer.

Resize the tire iron to 30%, place by the tube on the right.
Resize the wrench to 25%, free rotate to the left at 90 degrees.
Resize the rim to 45%, place behind the tube on the left, duplicate and move over and up a bit, change the color like before.
Resize the pit pass to 20%, place on the left on the film strip and erase a little bit of the chain to make it look like it is hanging on there.
Resize the dragonfly to 35%, place at the top where you like.
Resize the sunglasses to 25%, change the color, paste on the left by the car.

Add a new raster layer, fill with black, apply your mask, move to the bottom layer and resize larger if needed.

 Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Sexy Lady Lumberjack

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ted Hammond.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the  CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Nature Call by Chichi Designz   HERE
Look on the left side for FTU kits, use to be PTU now FTU
Becky's Template 243 HERE
 Moonbeams & Spiderwebs Mask 65  HERE

Filters
Xero-Clarity

Font of Choice, I use HL Thuphap 48k

Drop Shadow usually V2 H2 50, 7 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift and d to duplicate and close the original.
Delete the credits and all the wordart and the leaf vine.
Go to Image, canvas size and make it 800 x 800 or a size you prefer.

Paste paper 11 on the bottom layer of your template, just above your white background layer, apply your mask, delete and merge group, apply again, delete and merge group, resize as needed later for your tag.

Select the Lg Circle 2, paste paper 15, invert, delete, select none, delete the template layer.
Do the invert and delete on each one.
Lg Circle 1, paste paper 9, invert, delete, select none.
Lg Rectangle, paste paper 13.
Scalloped rectangle, paste paper 4.
Med circle 2 paste paper 1.
Sm circle paste paper 10.
Med Circle 1, paste paper 1.
Sm Circle 1, paste paper 4.
Scallope circle 2 paste paper 9.
Scalloped circle 1, paste paper 4.
Sm rectangle 2, paste paper 16.
Sm rectangle 1 paste paper 14, mirror your close up tube and paste, invert and delete, select none. Lower the opacity to about 60%.

Paste the grass, duplicate twice and adjust, erase the little bits on the ends.

Resize the barrel to 45%, place on the grass below one of the layers.

Paste  your tube like it is sitting on the barrel, duplicate, go to Adjust, Blur Gaussian blur at 4, change the blend mode to hard light, merge down.
Apply the Xero filter, Clarity.

Paste the mesh at the top just above the mask layer.

Resize the tree cut to 25%, place on the right side in between the grass layers, duplicate, resize to 80%, duplicate again to 80% and arrange how you want them.
Duplicate as many times as you would like and place in different areas.

Resize Tree 2 to 85%, mirror and place on the right side below the barrel layer.
Resize wooden element to 25% and place below the barrel layer and move to the left some.
Resize Tree 1 to 65%, move below the other tree and over a bit.
Resize the wheel to 50%, place on the left, just below the tube layer and have her knee just touching the wheel.

Resize birdhouse 1 to 30%, place on the upper right side on the tree.

Resize the stone trail to 40%, free rotate to the right at 45 degrees, move below the first grass layer,  duplicate, mirror, move back to the left and below the grass layer behind the wheel.

Resize the rocks to 30%, place by the wheel.
Resize the fruit to 15%, duplicate a couple of times and place in the grass where you like.

Resize the bird to 25% and place on the upper left side, duplicate resize to 75% and move down a little bit.

Resize the splat to 50% and place on the left side on the scalloped edge layer, duplicate and mirror and move out to the right just a bit.

Resize the sunray to 75%, place on the right side on the top layer.

Resize one of the doodle to 75%, then free rotate to the left at 50 degrees and place below the wheel layer on the left.
Resize the string to 50% and place by the tree cuts on the right.

Resize bird 2 to 20% and place on the wheel.
Resize the butterflies to 45%, place on the left side and erase the top 3 ones.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.