Lady Bug Love

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
Tube is called Special edition Lady Bug 2016.

You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Lady Bug by TK Dezigns  HERE
Check out the rest of the blog HERE
Vix Big Mask_ Set 2_Mask 119  HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation 254 by Simone  HERE
Check out the with of the blog HERE
Filters
Screen Works-Light Gauze
Xero-Soft Mood

Font of Choice, I used Cooper Black

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, 
 delete, merge group, resize larger to about 120.

Paste frame 3, click inside with your magic wand, expand by 10, paste paper 1, invert, delete.
Mirror your tube, resize to 80%, paste in the left frame, delete, back to the original tube, mirror, resize to 80%, paste in the smaller frame and move to the right more, merge down with the other tube.
Duplicate, Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen.
Apply xero filter-Soft Mood then,  Screen Works Filter, Light Gauze, merge down.

Resize your tube to 38%, paste about center on the frame layer.

Resize lady bug wordart one to 85%, paste one at the bottom on the left below the tube layer, duplicate, move to the upper right.
Resize element 24 to 85%, paste below the lady bug sign at the upper right.
Resize element 6 to 50%, paste on the left at the top of the small frame, free rotate to the left
at 25 degrees, duplicate, mirror, move to the upper right corner of the large frame.

Resize element 7 to 35%, place on the wordart sign at the bottom left, duplicate, resize to
85%, move up on the other sign at the upper right, duplicate, move to the lower right.
Resize element 30 to 50%, flip, free rotate to the right at 90 degrees, move to the bottom right and above the mask layer.

Paste element 12 at the upper right above the mask layer, duplicate, flip, mirror.
Resize element 28 to 25%, being on the top layer, duplicate a few times and paste where you like them.
Resize element 23 to 50%, paste on the frame on the left, erase a bit of the paper clip to make it
look like it is clipped on the frame.
Resize element 1 to 50%, paste on the left below the sign, duplicate, mirror, hide the ends behind the other elements.

Add any other elements you would like, make it your own.

If you would like to animate, merge visible with the white background, making sure you crop your tag so no shadows or anything will be on the edge of your tag,
Add your copyright and name,
copy to animation shop and make as many layers as the
animation has.
The one I used had 19 frame layers.
Go to edit, copy all on the animation, then go to the tag on the first frame, go to edit,
paste in selected frames.
Test your animation if happy save.

That's it

Hope you enjoyed doing my tut.

Happy Sweet Valentine Day

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
Tube is called Astrild 2017.

You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Sweet Heart by Heather's Devine Dezigns  HERE
Check out the rest of the blog HERE
Brutal Designs Valentine Mask 2016_14 4th one down  HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation 253 by Simone  HERE
Check out the with of the blog HERE
Filters
EyeCandy Gradient Glow

Font of Choice, I used Magneto

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 1, apply your mask, 
 delete, merge group, resize larger to about 120.

Paste element 56, click inside with your mask wand, expand by 5, paste paper 3, invert, delete.

Duplicate the frame, resize to 50%, move down on the lower left side, click inside with the magic wand, expand by 5, paste paper 3, invert, delete, resize your tube to 40%, mirror, paste, delete, select none.
Duplicate the tube, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to hard light,
merge the tube and paper down with the small frame, then free rotate to the left at 10 degrees.

Paste element 86 on the large frame layer, resize larger to 110%.

Paste your tube on the right, resize to 35%, bein on the top layer.

Resize element 32 to 50%, paste at the bottom about center.
Resize element 30 to 35%, paste on the left below the hearts, duplicate twice, mirror one, move the other to the left side, adjust.
Paste element 87 at the bottom above the hearts layer.
Resize element 47 to 30%, mirror, place on the right side.
Resize element 16 to 40%, paste on the left below the small frame, duplicate, mirror, adjust a little lower.
Paste element 48 on the right below the tube, adjust, duplicate, mirror, erasing any parts
of the hearts on either one you don't want.
Apply a fat gradient glow using EyeCandy 4000, and select a red from the frame paper to use.
Paste element 35 at the bottom above the hearts.

Resize element 64 to 55%, mirror, paste on the right below the flower.
Paste element 7 at the bottom on the left above the hearts and cross vase, duplicate, mirror.

Resize element 84 to 40%, add a fat red gradient like on the hearts, move to the bottom and left below the hearts layer, duplicate, move above the heart layer and to the right more.

Add any other elements you would like, make it your own.

If you would like to animate, merge visible with the white background, making sure you crop your tag so no shadows or anything will be on the edge of your tag,
Add your copyright and name,
copy to animation shop and make as many layers as the
animation has.
The one I used had 16 frame layers.
Go to edit, copy all on the animation, then go to the tag on the first frame, go to edit,
paste in selected frames.
Test your animation if happy save.

That's it

Hope you enjoyed doing my tut.

Autumn Babe

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
Tube is called September 2016.

You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Noche de brujas ll  HERE
Check out the rest of the blog HERE
WSL_Mask 536  HERE
Filters
Mura Meister Copies-Encircle

Font of Choice, I used Blacksword

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, resize paper 4 to 28%, paste, apply your mask, delete, merge group.

Resize Corona element to 30%. Take your free hand tool, draw around the wreath, making sure to get the smaller openings also, resize paper 1b to 28%, paste, invert, delete, move below the wreath.

Resize Hojas to 30%, apply Mura Meister Copies-Encircle with the first number being on 25, move below the paper layer of the frame.

Resize Hojas2 to 25%, apply Mura Meister Copies-Encircle again, paste above the other leave circle.

Resize your tube to 45%, place in the center on top of the wreath.

Resize the Varios element to 20%, paste on one side of the wreath, duplicate, mirror.

Resize Hojas 2 to 25%, paste on top of the Varios element on one side, duplicate, mirror, duplicate one and move to the center.

Resize the Tarro element to 25%, place on the left side above the leaves.

Resize the Cacerola element to 15%, place by the Tarro element.

Resize the Calabaza to 40%, place on the left below the tube layer.

Resize the element Tinaja to 25%, place on the right below the tube layer.

Resize the element Cazo to 20%, place on the left on the clay jar.

Resize the Vela element to 25%, place on the right above the tube layer.

Resize the Manta element to 20%, paste on the frame layer at the bottom, duplicate, mirror.

Resize the Calabaza 2 to 20%, paste below the paper frame on one side so just the grass part shows at the bottom, duplicate, mirror.

Resize the Caro element to 20%, place on the right above the large green leaves.

Resize the Libro element to 12%, place on the top layer by the leg of your tube.

Resize Brillos to 45%, place on the top layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Halloween Treat

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
Tube is called Perpetua.

You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Halloween Treat Collab by Scrap Dimensions  HERE
Check out the rest of the blog HERE
Mask 228 by Gems Taggin  HERE
Check out the rest of the blog HERE

Font of Choice, I used Gondoliere

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete and merge group, resize the mask larger to 125%.

Resize element 5 to 60%, place on the left side.

Resize your tube to 35%, place on the right with the hand on the cauldron pot.

Resize element 6 to 40%, place on the right side.
Resize element 15 to 75%, place on the left below the pot, duplicate, mirror.
Resize element 21 to 25%, place on the left side, duplicate, move out and up just a bit.

Resize element 16 to 45%, paste below the tube layer on the left at the bottom, duplicate, move below the pot and down toward the bottom, duplicate again and move over to the right.

Paste element 26 on the mask layer and move left a bit, change the blend mode to
Luminance (Legacy) and lower the opacity to 70.
Resize element 3 to 20%, place on the center of the spider web.

Resize element 12 to 75%, paste below the tube layer, mirror, move back to the right.

Resize element 4 to 60%, paste in front of the tube layer against her legs.

Resize element 24 to 20%, paste at the upper right.
Resize element 23 to 25%, place on the cauldron pot and erase some of the stem to make it look like it is in the pot.
Resize element 27 to 30%, place between the two toxic bottles at the bottom left, duplicate, move toward the center and below the tube layer, move up so just the fallen petals are showing, duplicate again and move over under the 3 bags, erasing any of the stem showing.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Cute Witch Glenda

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
Tube is called Glenda.

You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Fright_Fest by Nae Dezines-Afternoon Delight  HERE
Check out the rest of the blog HERE
Tonya  Halloween Mask 2 on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle

Font of Choice, I used Gondoliere

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, add a new image, fill with #671ca5,
apply your mask, delete, merge group.

Paste frame one, resize to 60%, click inside with your magic wand, expand by 5, add a new layer and fill with #bd9dd5, select none, move below the frame.
Resize frame 6 to 85%, paste below the color layer of the frame.

Resize flower 6 to 25%, apply Mura Meister Copies-Encircle, changing the first number to 30,
paste above the black frame.
Resize leaves 5, to 35%, apply Mura Meister Copies-first number still on 30, paste below the flower circle.

Resize your tube to 35%, place below the purple frame, duplicate, move above the frame, erasing the bottom part of the tube, but leaving the hand and broom above the frame.

Resize the bench to 65%, paste on the right below the broom.
Resize book 2 to 50%, place on the bench.

Resize the boot to 40%, place on the left, duplicate, mirror, move back to the left how you like.

Resize cat 2 to 40%, place by the bench.
Bottles 9 are several bottles, pick the ones you like and resize to what you want, I resized the three I used to 40% and placed two of them on the bench and one by the cat.

Resize pumpkin 1 to 50%, place on the left below the boots.

Paste leaves 4 above the top tube layer at the bottom.
Resize the spider to 75%, paste at the bottom on the leaves, duplicate, move over on the bench.
Resize flower 7 to 25%, free rotate to the left at 45 degrees, mirror, place on the left below the boot layers, duplicate, mirror, move above the orange bottle on the bottom.

Resize bat 2 to 30%, place at the top right, duplicate, mirror, adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Fall Weather

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
Tube is called Corine.

You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Fan Freebie #3-Autumn Theme by Tasha's Playground   HERE
Check out the rest of the blog HERE
Mask 196 by Scrappy Bit of Fun-Simone  HERE
Check out the rest of the blog HERE

Font of Choice, I used ?

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 1, apply your mask, delete, merge group, duplicate,  merge down.

Paste frame 2, free rotate to the left at 15 degrees, move to the left a bit.
Click inside the frame with your magic wand, expand by 5, paste paper 1, invert, delete, select none, move below the frame.

Paste element 6 in the frame.

Paste element 9 on the frame layer on the right, duplicate, mirror, move below the paper layer of the frame on the left.

Paste element 37 on the right below the fence layer, duplicate, move to the left below the paper layer of the frame..

Resize your tube to 35%, place on the right above the fence layer.

Paste element 21 below the tube layer at the bottom, duplicate, mirror, adjust.

Resize element 23 to 50%, place on the left below the bark layer.
Resize element 31 to 50%, place on the right on the bark.

Resize element 2 to 50%, place on the right below the fence layer, duplicate, mirror, move below the paper layer of the frame and up some, duplicate one, resize to 50%, move above the bark layer at the bottom and place how you like, duplicate once or twice and place.

Resize element 4 to 35%, place where you like, duplicate once or twice and place where you like.
Paste element 30 inside the frame layer.

Resize element 26 to 35%, free rotate to the right at 20 degrees, duplicate, mirror and place them where you like, duplicate, move below the tree layer on the left, duplicate, mirror, adjust both to your liking.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Lady Lovebug

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.

This tube is one of her lady bug special edition.

 

You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Lovebugs Love by Sassy Dede  HERE
Check out the rest of the blog HERE
DD_NFM_2015_4 Mask HERE
Check out the rest of the blog HERE
 WSL_Mask 84 HERE
20 20 Mask HERE

 

Font of Choice, I used Flower in the Window

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 7, apply DD mask first, delete, merge group, then paste paper 7 again and paste WSL_Mask 84, delete, merge group.
On the mask layer, select all, float, defloat, paste your close up tube, place how you like it, invert, delete, select none, change the blend mode to screen.

Resize frame 4 to 65%, paste below the tube layer on the mask.

Paste element 32, resize to 75%, move down some.

Resize your tube to 35%, place on the wagon more toward the left.

Paste element 85 below the wagon, apply the 20 20 mask, delete, merge group, duplicate the grass and move above the wagon and over some.

Resize element 70 to 40%, place under the tube layer to the left, duplicate, resize to 75%, move to the right more, duplicate again and resize again to 75%, move to the right more.

Resize element 42 to 25%, place on the flower where you like.

Resize element 72 to 10%, move below the tube layer in the wagon, take your free hand tool, draw around the bottom part, delete,  make it look like it is in the wagon.

Resize element 86 to 45%, place below the grass layer on the left, duplicate, mirror, move down into the grass, duplicate again, resize to 50%, move above the wagon and place by the wheel, duplicate, mirror.

Resize the shoes to 20%, place on the left on the flowers.
Resize element 72 to 20%, place below the shoe layer on the left.

Resize the butterflies, one to 15% and the other to 10%, place where you like, duplicate a couple of times and move around.

Duplicate the large flower at the bottom, move to just above the mask layer, duplicate, mirror.
Resize element 10 to 20%, place between the flowers at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Springtime Is Here



 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
The tube is called Spring
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Luck of the Charms by Disturbed Scraps  HERE
Check out the rest of the blog HERE
DD Mask 4 HERE
Check out the rest of the blog HERE
 

 Font of Choice, I used Chalked Hand Lettering Shaded

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete, merge group.

Paste element 12, resize to 80%, move to the left some, duplicate, mirror, move the edges until they touch, merge down.
Click inside all the frames with your magic wand, expand by 5, paste paper 4, invert, delete, resize your tube to 45%, paste in the left side frame, delete, select none, change the blend mode to overlay.
Paste the resized tube above the frame to the right.
Paste element 21 on the left side of the tube.

Resize element 041 to 80%, place at the bottom below the tube layer, duplicate 3 more times and adjust to your liking.

Paste element 039 on the left just above the mask layer, duplicate, mirror, resize to 85%, move above the frame layer.

Paste element 040 below the first trees, duplicate twice, one on one side, the other on the other side and one in the center, adjust.

Resize element 038 to 50%, place on the right side above the frame layer at the bottom, erase the part over the frame layer going toward the back, duplicate, mirror.

Resize element 59 to 60%, place on the fence at the front, duplicate several times and place on the fence on both sides and a couple behind your tube, moving the one behind your tube below the grass layers.

Paste element 37, resize to 85%, take your free hand and draw around the green ribbon and delete, place on the right side by the fence.
Duplicate one of the long flowers and resize to 75%, place in front of the sign.

Resize element 57 to 15%, and element 51 to 25%, duplicate a few times and place them on the grass how you like.
Resize element 23 to 75%, place on the grass below the tube layer.

Resize element 46 to 35%, place at the upper left side, duplicate, mirror, move down on the sign, duplicate again and mirror, place where you like.

On your sign, write out Springtime or a wording you prefer.

Resize element 24 to 75%, place at the top on the trees.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

St Patty Faery

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap 50 Shades of Shamrocks by Tasha's Playground  HERE
Check out the rest of the blog HERE
Mask 27 by Angie Tagged Me HERE
Check out the rest of the blog HERE
 

 Font of Choice, I used leaf 1

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

This is a quickie one

Open a new image 800 x 800 or one you prefer, paste paper 3,  resize your mask down to 85%, apply, delete and merge group.

Paste the scatters on the mask layer.

Paste the tree on the left side.
Paste the stairs in front of the tree.
Paste the grass in front of the stairs, move over some duplicate, mirror.

Resize your tube to 45%, place on the right side below one of the grass layers.
Paste flower 4 below the stairs on the left, duplicate, resize to 75%, move above the stairs on the left, duplicate, mirror, duplicate one of the flowers again, resize to 75%, place above the tube layer by the legs, erasing some of the stems.

Resize the hat to 50%, place on the grass on the left.
Resize the butterfly to 50%, mirror and move back to the left or place where you prefer.
Paste the mirror on the left side below the first flowers, take your free hand tool, draw around the mirror, resize your tube to 25%, mirror, paste, delete, select none, change the blend mode to overlay.

Resize coins to 25%, place on the right, duplicate and move over a bit.

Paste the sparkles a couple of times being on the top layer.

Resize shamrock #2 to 25%, duplicate once or twice and place on the grass where you like.

Resize scatter 2 to 40%, paste on the grass, below the hat, duplicate, mirror, move below the flower layer by the tube.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Lucky

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Lucky Enough by Horseplays Pasture Design  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE
 

 Font of Choice, I used Celtic

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete and merge group, resize larger to 105%, then paste paper 1, apply the mask again, merge down.
Paste the wire on the mask, change the blend mode to Luminance (L).

Paste frame 8 on the wire layer, resize larger to 110%.

Paste frame 4, click inside with your magic wand, expand by 5, paste paper 3, invert, delete, select none, move below the frame.

Being on the top frame layer, resize your tube to 45%, paste on the right side.

Paste the Gold at the bottom, duplicate twice, move one over to the right and the other over to the left.

Paste the word Luck on top of the gold layers.
Resize the horseshoe to 45%, free rotate to the right at 20 degrees, duplicate, mirror, moving both below the gold layers.

Corner flower line, free rotate at 90 to the left, move to the bottom below the tube layer.

Paste flower 3 below the corner flower layer on the right, duplicate, mirror, move down some and erase any stem showing below.
Resize flower 1 to 85%, paste on the paper layer below the window, sharpen once.
Resize the original flower 1 to 70%, paste above flower 3 layer on the left, sharpen once, duplicate, mirror.


Resize the leaf vine to 25%, paste below the corner flower layer on the left, duplicate, mirror, duplicate again and move over some.

Resize the dragonfly to 30%, place where you like, duplicate and mirror and place again where you like.

Resize clover 1 to 20%, paste on the gold coins, duplicate a couple of times, place where you like.

Resize the bird to 30%, place where you like, I placed mine on the wordart.
Resize the butterfly to 15%, free rotate to the left at 25, place where you like, duplicate, mirror.

Resize ribbon 2 to 80%, free rotate to the left at 90, place below the gold coins at the bottom, duplicate, mirror, move up some.

Resize bow 4 to 15%, place on the letter K of the wordart.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Waiting For You

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Zona Valentin by Angie Psp  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE
Filters
Mura Meister Copies-Encircle
EyeCandy 4000-Glass

 

Font of Choice, I used Chocolate Box 

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste element 2, apply Mura Meister Copies-Encircle, first number being on 12, apply your mask, delete and merge group, resize larger to 110.
Then go to Effects, Textures Effects, Texture and apply the brick wall texture with these settings
50
15, 5, 7, 0
315, 50, 30
color white
Resize element 11 to 70%, duplicate and line up side by side, merge down.
Click inside with your magic wand, expand by 4, add a new layer, fill with black or a color you prefer, select none and move below the phone booths.
Apply EyeCandy4000-Glass, twice with these settings or play around and get the look you want.
Bevel Width 10.98
Smoothness 52
Inside marquee checked
30, 35, 50, 0, 50
Color white
Bevel Profile on Button

Resize element 4 to 25%, paste at the top on one side, duplicate, move over to the other side on the phone booth.
Resize element 16 to 25%, paste at the top of the phone booth.

Resize your tube to 43%, place on the right side.

Resize element 35 to 60%, free rotate to the right, move below the paper layer of the phone booth, move in so the hearts don't show and erase the edges to match up with the phone booth, duplicate, move below the first one and pull out some, duplicate both, mirror and adjust on the other side.

Paste element 32 below your tube layer at the bottom, resize to 60%, erase the balloon part.

Resize element 27 to 80%, paste on the mask layer on one side, move up a bit, duplicate, mirror.

Resize element 12 to 30%, paste on the left on the ribbon at the bottom, duplicate, mirror, move back to the left below the first shoe.
Resize element 22 to 20%, place below the shoe layer, free rotate to the right at 15 degrees.

Resize element 40 to 50%, place on the left below the shoes.
Resize element 29 to 30%, place where you like at the bottom.

I added one of the free owls, resized to 15% and placed on the top of the phone booth.
Get these charming five owls on purchases over 7 euros for January only, then you will not be able to get them after January for free.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Chocolate Cupcake Love

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Chocolate Cupcakes by Angie PsP  HERE
Check out the rest of the blog HERE
Mask Set 105 #3 by Rachel Designs HERE
Check out the rest of her blog HERE

Filters
Mura Meister Copies-Encircle

 

Font of Choice, I used Chocolate Box 

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize paper 3 to 42%, paste, apply your mask, delete and merge group, then flip your mask, duplicate, merge down, sharpen, adjust to fit your tag later.

Resize element 28 to 35%, paste, flip, apply Mura Meister Copies-Encircle, first number being on 12.
Click inside your frame, expand by 10. resize paper to 42%, paste paper of choice, I used #3, invert, delete, move below the frame.
Resize element 31 to 20%, apply Mura Meister Copies-Encircle, first number being on 16, paste on the frame layer.

Paste element 42 on the mask layer, enlarge to 113%.

Resize your tube to 35%, paste on the frame layer.

Resize element 3 to 40%, paste at the bottom on your tube layer, add a fat white gradient glow.

Resize element 4, 5, and 6 to 20%, place below the tube layer how you like, duplicate, mirror and adjust on the other side.

Resize element 14 to 25%, paste by the spoon on the left.
Resize element 33 to 35%, paste on the right by the cupcake, duplicate, move to the left, duplicate again, move to the center and below the tube layer.

Resize element 27 to 30%, place on the right.
Resize element 26 to 32%, place on the left below all the cupcake layers.
Resize element 41 to 20%, mirror, place below the spoon layer on the tube layer.
Resize element 37 to 30%, free rotate to the right, place between the cupcakes on each side.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Love, Love, Love

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap LOVE by Mago74  HERE
WSL_Mask 84 HERE

Filters
Mura Meister Copies-Encircle

 

Font of Choice, I used Chocolate Box 

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize paper 12 to 23%, paste, apply your mask, delete and merge group.
Then resize paper 8 the same, apply your mask, delete, merge group.

Resize ramka1 to 70%, duplicate, resize to 90%, click inside with your magic wand, expand by 5, resize paper of choice to 22%, paste invert, delete.
Paste your close up, delete, select none.

Resize your tube to 45%, paste on the right side on the top frame.

Resize element 9 to 15%, apply Mura Meister Copies-Encircle, move below the paper layer of the frame.

Resize element 11 to 15%, apply Mura Meister Copies-Encircle.

Resize wordart 5 to 40%, paste twice, move one below the paper layer of the frame and up toward the top more, paste the other one above the tube layer and down some, use your free hand tool or erase the words above LOVE.

Resize element 14 to 25%, place on the left side on the frame, duplicate, resize to
75%, paste on the right side below the tube layer.

Resize element 15 to 25%, mirror and place behind your tube at the top.

Erase the stem part on element 33, then resize to 22%, paste on the upper left side on top of the threads of the hearts, free rotate to the left at 10 degrees.

Resize element 18 to 15%, paste at the lower left below the wordart, duplicate, mirror.
Resize element 63 to 15%, paste above the layers you just pasted.
Resize element 60 to 15%, paste on the right bottom below the frame layers.

Resize element 1 to 25%, paste on the top layer where you like, duplicate, flip, move below the tube layer at the top.

Resize element 47 to 25%, free rotate to the right at 90, paste below the tube layer on the right, duplicate, mirror, move between the frame layers on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Sugarplum Christmas

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

The tube is called Sugarplum Maria.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Sassy Christmas by Sassy Dede HERE
Check out the rest of the blog HERE
WSL_Mask 105 HERE
 Toxic Desirez Mask, 1st one down HERE
Check out the rest of her blog HERE
Filters
EyeCandy 4000-Gradient Glow
Xero-Soft Vignette

 

Font of Choice, I used Authentic Hilton 

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize paper 13 to 23%, apply mask 105 first, delete and merge group.
Paste the paper again resized like before, apply the other mask, delete, merge group.

Resize the corner element to 50%, place on one side, duplicate, mirror, merge down.

Paste element WOA at the bottom, resize to 80%, apply EyeCandy 4000-Gradient glow on the fat setting and color white, width at 3.

Paste your tube on the mask layer how you like, then take your free hand tool, draw around the frame part, invert, delete.
Duplicate the close up tube, go to Adjust, Blur, Gaussian blur at 5, change the blend mode to hard light, merge down, then apply xero filter
Soft Vignette with these settingsElliptical
Foreground color
Diagonal dots
1, 0, 0, 255
Paste your tube again, resize to 30%, paste on the right below the wordart layer.

Paste Balls 5 element below the tube layer on one side, duplicate, mirror.

Resize the elf to 25%, mirror, place on the right side above the wordart.
Resize dog 2 to 30%, place in front of the wordart where you like.
Resize element Balls 16 to 30%, place by the dog, duplicate and move over by the elf.
Resize food 6 to 50%, place on the left side.
Resize the elf hat to 25%, place below the food layer and over just a bit.
Resize ribbon 3 to 25%, place at the top on the frame.

Resize tag 2 element to 25%, place on the left below the wordart, duplicate, mirror, move below the tube and down some.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Cheers to New Beginnings

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

The tube is called Happy New Year 2016.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Roll in the New by Gold Dust  HERE
Check out the rest of the blog HERE
DD Partiotic Mask #4 HERE
Check out the rest of her blog HERE

 

Font of Choice, I used Authentic Hilton 

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 12 or choice of your own, apply your mask, delete and merge group.

Resize frame 10 to 75%, click inside with your magic wand, expand by 5, paste paper of choice, I used #2, invert, delete. Move off center some to the left.

Resize your tube to 33%, place on the right, then select all, float, defloat, expand by 3, add a new raster layer, fill, select none, move below the tube, add noise at 50%, back on the tube layer and merge down.

Resize the lips to 75%, free rotate to the left at 20 degrees, place on the upper right of the frame by the tube.

Resize the car to 80%, place below the tube layer and to the left more.

Resize the puppy to 50%, place on the left by the car.
Paste the wordart Cheers to a New Beginning on the tube layer at the bottom.

Resize the champagne to 50%, place on the right below the tube layer.
Paste the disco ball below the frame and up a bit to the right.
Paste sparkle 4 on the disco ball.
Resize blower 2 to 50%, place on the right by the champagne.

Paste the drop ball on the right, take your free hand tool, draw around the new year wordart and date, delete, select none, then place behind your tube.
Select all, float, defloat, paste one of the sparkles on the drop ball, invert, delete, select none.

Resize the balloons to 50%, duplicate, mirror one, paste both on the left side, moving one down some.
Then resize the ribbon to 50%, duplicate a couple of times, place like they are part of the balloons.
Paste the fireworks below the paper layer of the frame, duplicate a couple of times and place where you like.
Resize the rockets to 20%, free rotate to the right at 20 degrees and place at the upper left side, below the balloon layers, duplicate, mirror, move below the drop ball layer.

Resize mask 2 to 30%, place on the car, sharpen once.
Resize the shoe to 30%, place on the right on the ball stand, change the color, go to Adjust, Hue and Saturation, colorize with these numbers
Hue 25, Saturation 105
then duplicate, mirror, move back to the right above the tube layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Poinsettia Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

The tube is called Poinsettia.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Enchanting Woodland Christmas by Russia/Dutch Heart  HERE
Scroll down a bit
Check out the rest of the blog HERE
RD Mask Set 101, I used #3 HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle

 

Font of Choice, I used Candlescript

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize paper 4 to 22%, paste, apply your mask, delete, merge group, then resize larger to 115%.
Resize element 4 to 25%, apply Mura Meisters Copies-Encircle, default settings.

Resize your tube to 30%, paste in the center.

Resize element 17 to 20%, paste on the left side.

Resize element 4 to 25%, place at the bottom.

Resize element 3 to 15%, place below the deer, duplicate, mirror.

Resize element 19 to 20%, mirror, place on the right side on the leaves.

Resize element 2 to 20%, place above the mask layer on one side, duplicate, mirror, adjust.

Resize element 5 to 20%, free rotate to the left at 90, paste below the tube layer, duplicate, mirror, duplicate again, free rotate to the right at 45 degrees, move up a bit, duplicate, mirror.

Resize element 23 to 20%, place below the tube layer on one side, duplicate, mirror, duplicate, flip, erasing any part you don't want, duplicate again, mirror.

Resize element 1 to 20%, free rotate to the right at 90, duplicate 2 more times, mirror one and place them at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Winter Angel Star

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alicia Mujica.
This tube is one of her Black Friday 2015 Pack,  tube II.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap FTU Winter Angel 2015 by Pink Paradox Productions  HERE
Check out the rest of the Blog HERE
 WSL_Mask 116  HERE
Filters
Xero-Titanium, Soft Vignette, Porcelain
Mura Meister Copies-Encircle
Font of Choice, I used Al Sandra

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

 

Open a new image 800 x 800 or one you prefer, fill with white or a color /paper of choice, apply your mask, delete and merge group.

Paste frame 2, resize to 65%, duplicate, change the blend mode to burn, merge down. Click inside with your magic wand, expand by 5, resize paper 10 to 80%, paste, invert, delete, then, mirror your close up tube, paste, delete.
Move both the paper and tube below the frame layer.

Resize element 67 to 80%, paste on the mask layer.

Duplicate your close up, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode to hard light,  merge down, then apply the Xero filter-Titanium with these settings
35, 100, 60, 127
Subtle checked
Then apply Xero filter-Soft Vignette with these settings
Elliptical
Foreground color
Pattern, Square Mesh
 1, 0, 0, 255
Then apply the Xero-Porcelain

Paste your tube on the right, resize to 45% if using the same one I am, apply the Porcelain to this tube also.
Resize element 20 to 50%, place behind your tube.

Resize element 49 to 75%, paste under your tube.

Resize element 56 to 35%, place below the tube layer on the right, duplicate, mirror, adjust below the paper layer of the frame.

Resize element 28 to 25%, paste above the tube layer on the right.

Resize element 22 to 25%, place on the left by the tube.

Resize element 42 to 25%, place by the boxes, duplicate, move over to the right more and below the boxes.

Resize element 29 to 25%, place on the left below the boxes.

Resize element 73 to 35%, apply Mura Meister Copies-Encircle with the first number on 12, paste on the bottom layer. Add noise at 50%.
Resize element 69 to 60%, paste below the above layer on the right side.
Resize element 74 to 35%, paste on the bottom layer, place on the left where you like, duplicate, move up and over some, duplicate again, mirror and move over to the right more.

Resize element 57 to 35%, paste on the left, below the clock.
Resize element 13 to 25%, mirror, move by the clock, change the blend mode to Luminance (L)

Resize element 44 to 20%, place on the right in front of the card.

Add any other elements that you would like.

 

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

 

That's it

Hope you enjoyed doing my tut.