Furry Santa

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Furry Santa.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art at VeryMany Store HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Sparkling Icicles  HERE
You can check out her blog HERE
DD Geo Mask 4 HERE
Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle
AAA Frames

Font of Choice, I used Pamega Script

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete, merge group, resize the mask to fit your tag later.

Paste frame 2, resize larger to 155%, click inside with your magic wand, expand by 10, paste paper 5, move up so the trees show unless you would prefer them not to show, invert, delete.
Paste the snow swirl on the frame layer, resize larger to 110%, mirror.
Paste the snow swirl original size, resize to 85%, paste on the paper layer of the frame.

Paste snowflake 2 above the mask layer, flip, apply Mura Meister Copies-Encircle with the first number changed to 20, change the color to match your tag.

Resize your tube to 70%, place at the bottom of the frame.

Paste the sleigh on the right below the cat layer.
Resize the presents to 65%, paste on the right above the cat layer.
Paste tree 2 on the left below the cat layer.
Resize the birdie to 75%, place by the cat on the left.

Resize the blue candy cane to 60%, place by the presents, resize the yellow candy cane to 70%, free rotate to the right at 45 degrees and place by the first one.
Resize bow 4 to 75%, paste at the top of the frame, recolor how you like. I took the blue and gold from the colors and made a gradient with a repeat of 15 to recolor mine.

Add any other elements you would like.

If you want to make a signature tag and Avator do not merge your tag yet.

Signature tag
Open a new image 600 x 250, paste paper 4.
Take each of the elements from your tag and resize most to 70%, or a size you prefer for your tag.
Once happy with it, merge visible and add a frame.
I used AAA Frame-Foto Frames with these settings
3, 0, 0, 2, 0, 0, 0, 50
Add your copyright and name.

Avator
Open a size you are allowed for your group or forum and resize each element to fit your size,
once happy with the look, merge visible and add the same frame as before.
Add copyright and name.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Midnight Desire

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Mask_2.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Midnight Desire by MizTeeques  HERE
You can check out her blog HERE
Vix Butterfly Mask 362 HERE
Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle
Xero-Radiance

Font of Choice, I used Before the Rain

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 10, apply your mask, delete, merge group, resize larger to 130%.

Paste element 50, erase the stem and the smallest flowers, resize to 75%, apply Mura Meister Copies-Encircle, first number change to 16.
Resize element 13 to 40%, apply Mura Meister Copies-Encircle with the first number being on 18 this time, move below the first circle you made.

Resize element 24 to 45%, paste below the first circle.
Resize element 5 to 90%, apply Mura Meister Copies-Encircle first number on 12, move to just above the mask layer.

Paste your tube on the top layer on the left side, resize to 45%.

Resize element 31 to 50%, paste below the tube layer and move to the right.

Resize element 27 and 35 to 22%, place both on the right side, one a bit lower.

Resize element 54 to 35%, place at the bottom by the leg of your tube.

Resize element 45 to 55%, paste behind the tube on the left.

Resize element 8 to 25%, paste on the upper right side.

Resize element 10 to 25%, place on the wordart desire, free rotate to the left at 20, duplicate, mirror, move up on the left side.

Resize element 44 to 70%, paste below the violin on the left and move up some, duplicate, mirror, move down some and erase the stem showing at the bottom.

Resize element 40 to 55%, free rotate to the right at 90, paste below the mask layers at the bottom, duplicate, mirror.

Paste element 59 just above the top circle frame, resize to 95%, then take your pick tool and pull in the side to adjust to your liking. Add a medium white gradient glow.

Add any other elements you would like, make it your own.

Once you are happy with your tag, close off any backgrounds, merge visible, then go to Adjust, Hue and Saturation, Colorize, with both numbers on 0.

Then apply the
Xero filter-Radiance to the whole tag, change the first number to 80, sharpen once.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Enjoying Autumn

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

The tube is called Lucy.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Verymany  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Awesome Autumn by Elves of Rosegarden  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 128_Mask 4  HERE
Check out the rest of the blog HERE

 Font of Choice, I used Harlow Solid Italic

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 15, resize larger to 130%, apply your mask, delete, merge group.

Paste the bank element, mirror, move to the right more.

Resize your tube to 50%, place on the bank bench.

Paste the fahrrad behind the bench, mirror, move to the left more.

Paste the band under the bench and adjust to your liking.

Paste blaetter 2 under the bench, duplicate, mirror.

Paste the laubhaufen just above the mask layer at the bottom.

Paste the graeser 2 below the bicycle layer, duplicate a couple of times and move where you like.
Paste graeser 1, move how you like, duplicate, mirror.

Resize the strolballen to 75%, paste below the bicycle layer on the right.

Resize the fushs to 50%, place on the left by the tube layer.

Resize the amsel to 15%, place on the top of the bench.

Resize the schluessel to 15%, paste on the handle bar of the bicycle, erase some of the ring.

Paste the deko7 on the mask layer, duplicate, mirror, move how you like.

Resize pilz to 40%, place below the bicycle layer on one side, duplicate, move to the other side.

Resize the kuerbis to 25%, place below the fox layer on the left.

Resize blume 1 and 2 to 25%, place them where you like.

Resize zweig 2 to 25%, paste where you like at the bottom, duplicate two or three times, moving where you like.

Resize the beeren to 25%, place below the bench layer at the bottom, duplicate, mirror, adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Autumn Feather Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

The tube is called Autumn.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Verymany  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Colorful Autumn by Elves of Rosegarden  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 128_Mask 4  HERE
Check out the rest of the blog HERE
Filter
Mura Meister Copies-Encircle
 Font of Choice, I used Hector le Dragon

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 8, resize larger to 130%, apply your mask, delete, merge group.

Resize frame 3 to 90%, free rotate to the right at 90, click inside your frame with your magic wand, expand by 5, paste paper, invert, delete, mirror your close up tube, paste, delete, select none, change the blend mode to screen, duplicate and merge down.
Duplicate the frame, change the blend mode to burn.

Resize element 42 to 55%, paste above the mask layer, apply Mura Meister Copies-Encircle.

Resize your tube to 90%, place on the right side.

Resize element 32 to 30%, place above the tube layer about center, duplicate, move below the tube and to the right, duplicate, move over a bit, duplicate again, mirror.

Resize element 49 to 55%, paste on the left below the flower.

Resize element 21 to 25%, paste by the pumpkin, duplicate, move over to the right by the leg.

Resize element 33 to 50%, place on the left side below the flowers.

Paste element 10 below the tube layer and adjust to your liking.

Resize element 44 to 50%, mirror,  place above the birdhouse on the left.

Resize element 28 to 90%, paste on the right above the mask layer, duplicate, mirror.

Resize element 20 to 25%,  duplicate two more times and place on each side below the flower layer.

Resize element 46 to 40%, place on the left side on the frame, duplicate, move up, duplicate, mirror.

Resize element 11 to 40%, paste behind the tube layer at the top right duplicate, mirror.

Resize element 29 to 20%, mirror, place on the left by the pumpkin.

Resize element 15 to 15%, mirror, place at the upper left, duplicate, mirror, place on the right where you like.

Resize element 25 to 25%, place at the top of the frame under the branches and bird.

Resize 54 to 30%, place on the frame at the top.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Watermelon Kisses

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Watermelon.

You need a license to use this art work. Please do not use without a license.

 You can find this art at their Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Watermelon Kisses by  Melissaz Creationz   HERE
Check out the rest of the blog  HERE
Squirrely's Treehouse Mask 69 HERE
Check out the rest of the blog HERE

 Font of Choice, I used Watermelon Script

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 10, resize larger to 125%, apply your mask, delete, merge group.
Paste element 35 on your mask layer, click inside with the magic wand, expand by 5, paste paper 10, invert, delete.

Paste element 16 on the left and move up toward the top, duplicate, move down, duplicate both and mirror both, adjust to your liking.
Paste element 15 at the top, duplicate, flip, resize to 85%, place on one side, duplicate, mirror, adjust to your liking.
Paste element 11 below the flower layers.

Resize your tube to 60%, paste above the flower layers in the center.

Paste element 26 on the right by the foot of the tube, duplicate, move to the left below the tube layer.
Paste element 25 below the tube on the right by the foot and move out just a bit.
Resize element 24 to 85%, place on the left above the tube layer by the leg.
Paste element 27 by the watermelon slice.
Paste element 9 below the tube layer on the right by the foot

Resize element 14 to 60%, duplicate, place one on the left and one on the right below the flower layer, adjust how you like.
Resize element 20 to 60%, mirror, place on the bucket handle.
Resize element 19 to60%, free rotate to the right at 25, place at the upper left.

Resize element 8 to 50%, duplicate, place by the kisses squares.
Paste element 28 at the bottom where you like.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Love of Gold

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Helen.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Scrap I Love Gold by DymunArt Creations  HERE
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE

Filters
Xero-Bad Dream
Andrews 17-Dots In The Night
or
(You could use Greg's Factory Output Vol II-Pool Shadow
and play with the settings to get one you like)
 

Font of Choice, I used Brotherhood Script

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 9, apply your mask, delete, merge group.

Paste element 17, resize to 90%, apply filter, Andrews 17-Dots In The Night with
these settings
6, 6, 14, 25, 13, 101, 130, 163
Click inside with your magic wand, expand by 5, paste paper 11 or one of your choice, invert, delete, mirror your close up tube first, then paste, delete select none.
Apply the Xero filter-Bad Dream with these settings
175, 145, and none checked. Change the blend mode to Screen or one you like.

Paste element 12 at the bottom of the frame, take your Pick tool and holding the shift key down and taking the top corner square and drag straight down on one side and then the other until it is flat, duplicate 3 times and adjust how you like them, moving one below the paper layer of the frame on the left.

Resize your tube to 60%, place on top of the glitter on the left.

 Element 11 to 60%, place below the tube layer off center some.
Resize element 32 to 25%, place by the perfume bottles.
 Element 6 to 50%, place on the right side above the candles.
 Element 5 to 25%, place on the right below the tube layer, duplicate, mirror, move back by the first boot.
Resize element 27 and 1 to 25%, place on the left by the tube.
Resize element 22 to 25%, place by the purse.
Resize element 2 to 25%, place by the legs of the tube at the bottom.
Resize element 15 to 10%, place below the tube layer my her hand on the left, duplicate, take your Pick tool and hold the shift key first and then hold on of the upper squares and drag straight down on one side then the other until it is laying flat, duplicate as many times as you like and place where you like.

Paste element 19 on the left behind the tube, duplicate, mirror, resize to 50%, move to just above the frame layer, duplicate again and move up some, apply the
Andrews 17-Dots In The Night filter to the coins in the back.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Spring Beauty

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Laurel.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Scrap Florality by ChiChi Designz  HERE
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE
 

Font of Choice, I used Before the Rain

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete, merge group.
Resize frame 1 to 90%, paste, click inside with your magic wand, expand by 5, paste paper 12, invert, delete, select none.

Paste frame 2 below the paper layer of the first frame, resize to 90%, duplicate, mirror, move down some on the right.

Paste grass 1 at the bottom on the top frame, duplicate, mirror, adjust.

Paste the fence below the grass layers.

Paste the plant on the left side, resize to 85%, duplicate, mirror.
Resize flower 2 to 75%, place on the right side, duplicate, mirror.
Paste flower 1 on the left, duplicate, mirror.

Resize the flowers to 85%, place on the grass layer in the center.
Resize flower 3 to 80%, free rotate to the left at 30 degrees, paste on the left side, duplicate, mirror.

Resize your tube to 60%, place in the center on the top layer, duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down.

Paste the Swirl sparkles just below the tube layer, duplicate, mirror.

Paste the flower trail on the frame layer, duplicate, mirror.

Resize the bird to 25%, mirror and place at the upper right.

Resize the butterfly to 25%, duplicate, mirror and place them where you prefer.
Duplicate the one on the left, resize to 70%, move up to the top more.

Resize the egg to 25%, place on the left below the tube layer by the leg.
Resize the chick to 25%, place it by the egg, duplicate and move to the right below the tube layer.
Resize the dandelions to 50%, place on the fence layer, on one side, duplicate, mirror, adjust.
Paste the flower brush on the left side below the swirl sparkle layer.

Paste the bubble trail below the tube layer at the bottom, duplicate, flip and adjust at the top.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Sweet Love

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Vampire.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Scrap Sweet Heart by Heather Devine Dezigns  HERE
You can check out her blog HERE
DD Valentine Mask_7 HERE
Check out the rest of her blog HERE
 Filters

Mura Meister Copies-Encircle

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 2, apply your mask, delete, merge group.
Paste element 12, duplicate, resize to 50%, duplicate, move one to the upper left and the other to the lower right, erase any part of the larger frame showing in both of the smaller frames, close off mask and merge visible, reopen mask now.

Click inside with your magic wand, expand by 10, paste paper 13, invert, delete, move below the frames, paste your tube in the small heart, delete, mirror your tube and paste in the other heart, delete, select none.
Erase any parts showing in the large heart, merge these 2 tubes together, duplicate, Gaussian Blur at 5, change the blend mode to hard light.

Paste your tube in the center heart, move below, duplicate, move above, erase the parts you do not want showing on both tubes.

Resize element 75 to 65%, apply Mura Meister Copies-Encircle with the first number on 25, place on the mask layer.
Resize element 8 to 60%, apply Mura Meister Copies-Encircle with the first number on 20, paste on top of the other circle you just made.

Paste element 86, resize larger to 135%.

Resize element 8 to 50%, paste on top of the frame layer on one side, duplicate, move to the other side, erase some of the ribbon on the one on the right side. Duplicate the one on the right and move down some and under the paper layer of the frames.

Resize element 65 to 60%, free rotate to the right at 15 degrees, paste on the right side, above the frame layer.
Resize element 8 to 50%, free rotate to the right at 90 degrees, place by the corset, duplicate, mirror, move above the boxes.

Resize element 64 to 75%, paste at the bottom part of the frame, being on the top layer.
Paste element 9 on the box layer.

Resize element 43 to 75%, paste on the left side.
Resize element 66 to 55%, paste by the champagne bottle, duplicate and move over and up a bit.
Resize element 63 to 50%, paste on the left side below the champagne and glass layers.
Resize element 62 to 50%, paste by the other boxes.
Resize element 89 to 50%, paste on the top layer at the bottom, about center.

Resize element 26 to 25%, duplicate a couple of times and place them where you like.

Resize element 48 to 50%, place on one side, duplicate, mirror, adjust both to your liking.

Resize element 47 to 25%, place on the boxes on the left.

Resize element 53 to 50%, paste just above the corset on the right.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

A New Year Again

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Kristine.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Happy Holidays by Disturbed Scraps  HERE
You can check out her blog HERE
Monti's Masks-Blind and Blind 1 HERE

Click on the word Extras to go to the masks

Filters

Mura Meister Copies-Encircle

Screen Works-Lace Screen

Font of Choice, I used Alex Brush

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 2 or choice of your own, apply blind mask, delete and merge group.

Paste the paper again and apply blind 1 mask, then go to Effects, Edge Effects, Enhance, merge down.

 

Paste frame 064, resize to 80%, mirror, free rotate to the right at 15 degrees.

Click inside with your magic wand, expand by 5, paste paper 1, invert, delete, move below the frame, paste your tube, delete, select none. Change the blend mode to Luminance (L)

Apply Screen Works filter-Lace Screen to the frame.

 

Paste piano on the right side above the frame layer.

Paste element 19 on the left to cover up the glass and mask on the frame.

 

Resize your tube to 45%, mirror, paste on the left side.

Paste element 15 on your tube and move to the right some.

 

Paste element 18, change the color by going to Adjust, Hue and Saturation, colorize, having both numbers on 0. Resize to 80%, apply Mura Meister Copies-Encircle with the first number on 15, move down to just above the mask layers.

 

Resize element 28 to 55%, duplicate, mirror, place one below the tube layer and one above.

Paste element 44, take your free hand tool and draw around the red color and delete, resize to 50%, change the color as before with the Hue and Saturation.

Resize element 45 to 55%, change the color as before, place below the sparkle layer behind the box to cover up the year on the bottle.

 

Paste element 10 below the shoe layers on the left, then duplicate, resize to 70%, place below the champagne glasses.

 

Resize element 52 to 70%, change the color, paste at the upper left below the tree.

 

Wordart 69, take your free hand tool, draw around the heart, delete, select none, paste on the upper right of the frame, resize to 70%, change the color with Hue and Saturation like before, then select, select all, float, defloat, expand by 2, new raster layer, fill with white, move below, sharpen the top wordart once.

 

Paste element 40 on the piano, free rotate to the right at 90, resize to 35%, coloring as before..

Resize element 4 to 40%, place below the piano leg on the right, duplicate and move over some.

Paste element 13 just below the tube layer at the bottom, erase a couple of them on each end, color like before.

Paste element 54 below the tree, change the color with the Hue and Saturation, move up.

 

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Peacock Mask Beauty



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Very Many.

The tube is called Mask

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at their Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Peacock's Pride by Russian-Dutch Heart Design  HERE
Download both 1 and 2
WSL_Mask 84 HERE
 

Filters
Mura Meister Copies-Encircle
VM Extravaganza-Transmission
 

Font of Choice, I used Great Vibes

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer working with.
I like lots of room, can resize later.

Resize paper 11 to 22%, paste, apply your mask, invert, delete, resize larger to 110%.
Resize paper 8 to 22%, paste, apply the mask, invert, delete. 

Paste and resize Cluster 2 to 28%, click inside with your magic wand, expand by 5, paste paper of choice, invert, delete. I used paper 11, then apply VM Extravaganza-Transmission with these settings 10, 0, 10

Resize Cluster 3 to 20%, place on the left side.
Resize element 27 to 10%, place under Cluster 3 toward the center.

Resize your tube to 50%, place on the right side, move below the frame, duplicate, move above the frame and erase part of the legs to soften the straight edge.

Resize element 23 to 25%, place below the frame and over to the left more, erase the feathers showing outside the frame.

Resize element 35 to 11%, apply Mura Meister Copies-Encircle, change the first number to 15, move below the paper layer of the frame and over to the right a bit.
I erased the part on the bottom right because the cluster already had some on that side.

Resize element 24 to 10%, apply the Mura Meister Copies-Encircle like before, move just above the flair glare layer, take your tool pick to pull out to fit the tag the way you would like.

Resize element 34 to 13%, apply the Mura Meister Copies-Encircle with the same settings as before, paste on your mask layer.

Resize element 37 to 35%, place on the mask layer, sharpen once, duplicate, merge down.

Add any other elements you would like, make it your own.

(If you are not going to animate)

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

Animation

If you would like to animate the tag, keep a white background, copy merged and paste to animation shop.
There are lots of ways to do this, but this is how I do it.
Once pasted, go back to psp and take your free hand tool, draw around the blue on the lantern, then go to Adjust, Brightness and Contrast, Brightness/Contrast
with these numbers
10, 5
copy merged to animation shop and paste after current frame.
Back to psp, edit, undo select none,  undo brightness/contrast.
Go to Adjust, Brightness and Contrast, Brightness/Contrast and change the numbers to
15, 10
copy merged, paste after current frame in animation shop.
Test the animation, if happy with it, save as a gif.

 That's it

Hope you enjoyed doing my tut.

American Girl

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Verymany Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap 4th of July by MizTeeques  HERE
Be sure to check out the rest of the blog HERE
DD_Star Mask 2  HERE
Check out the rest of the blog HERE
Filters
Xero-Mistifier
Toadies-What Are You

Font of Choice, I used IFC INSANE RODEO

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

This is a quickie one

Open a new image 800 x 800 or one you prefer.
Paste paper 4, apply your mask, delete and merge group, sharpen twice.

Resize frame 3 to 70%, paste, click inside with your magic wand, expand by 5,
paste paper 2, invert, delete, then paste your close up tube, delete,
select none, moving both below the frame layer.
Apply the xero filter-Mistifier with all numbers set at 255 on the close up.
Duplicate the frame, being on the bottom one add the Toadies Filter-What Are You with the numbers set on 14, move this layer below the tube layer.

Resize element 29 to 33%, move to the upper left and apply
a fat red gradient glow using EyeCandy 4000-Gradient Glow with
the glow width set at 3.
Resize element 28 to 40%, paste on the lower left partly on the frame, add the
same fat red gradient to this also.

Resize element 43 to 55%, paste just above the mask layer on the upper right,
duplicate, mirror, move down some on the left.

Resize element 31 to 10%, paste by the USA wordart, duplicate and move over to the other side of the wordart, duplicate 3 more times and place on the left side
of the frame and move each one down a bit from each other, then merge these
3 together, duplicate, mirror and move down on the right side.

Resize element 16 to 13%, paste below the USA wordart.

Resize element 32 to 5%, paste under the strip, duplicate a couple of times and place how you like.

Paste your tube, being on the top layer, mirror, resize to 50%, place on the right side.

Resize element 4 to 40%, place on the legs of the tube.
Paste element 45 on the left above the shoe layer, duplicate, mirror, flip
and adjust.

Resize element 22 to 20%, paste on the left below the USA wordart.

Add any other elements that you would like.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

The Look

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Verymany Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Golden Moments by Gimptastic  HERE
Be sure to check out the rest of the blog HERE
Tres Mask 0113  HERE
You will have to add this one to your mask folder

Filters
Xero-Soft Vignette
Mura Meister Copies-Encircle

Font of Choice, I used Brotherhood Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 1,  resize larger to 125%, apply your mask, delete and merge group.

Paste frame 2, click inside with your magic wand, expand by 5, paste your close up, invert, delete, select none.  Sharpen the frame once.

Duplicate your tube, go to Adjust, Blur, Gaussian blur at 4, change the
blend mode to soft light or one you prefer, then merge down.
Apply the Xero Filter, Soft Vignette with these settings
Ellipitcal, Foreground color,
Diagonal Dots,
1, 0, 0, 255

Resize your tube to 55%, paste on the right side above the frame layer.

Paste feather 2, resize to 65%, apply Mura Meister Filter, Copies-Encircle,
change the amount to 20 and leave all other numbers as is,
move below the tube layer in the frame.

Paste deco 4, resize to 55%, apply the Mura Meister Filter again,
with the same settings, move below the feather layer, change
the color by going to Adjust, Hue and Saturation, Colorize with
these numbers
Hue 255,  Saturation 182

Paste flower 1, resize to 75%, place above the top tube layer in the center,
duplicate, resize to 85%, move to one side, duplicate, mirror.

Paste the bottle on the left side below the flower layer.

Paste the deco 1 below the flower layers, duplicate, mirror.

Resize the heel to 55%, place on the top layer on the left side,
duplicate, mirror and move back  over to the left.

Paste the hat, resize to 65%, mirror and place on the right side,
above the flower layers.
Paste the phone, mirror, resize to 65%, place above the hat layer
on the right.

Resize the box to 40%, place on the left below the shoes.

Paste the gold wing on the right just above the frame layer and
move out behind the tube layer, duplicate, mirror, adjust,
erase any part above the flowers you do not want showing.

Paste feather 1 just above the gold wing on the left, free rotate to the left
at 15 and place how you like it.

Paste the sash below the flower layers and up just a bit to let some of
the gold show above them, duplicate, move down so a little bit is showing
at the bottom, erase some of the ribbon part, duplicate again, move over
some and erase the ribbon part again.

Add any other elements that you would like.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Christmas Gifts

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Very Many.

You need a license to use this art work. Please do not use without a license.

 You can find this art at Verymany Tubes  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap CCAM by Designs by LK  HERE
 Rocked by Rachel Mask Set 2_1  HERE

Filters
Mura Meister Copies
Xero- Soft Vignette
Font I used was Close to You

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste frame 2, duplicate, resize to 75%, mirror, flip and move down, adjust the frames to your liking, erase the part of the larger frame showing inside the small frame, then merge the frames together.

Click inside each frame separately, paste paper 12, move so the snowflakes are in the frame, invert and delete. Do this again for the smaller frame.

Paste the bells, apply Mura Meister Copies-Encircle, move below the paper layer of the frames, resize to 90%, move up to the larger frame, duplicate, mirror, flip, resize to 80% and move to the smaller frame, duplicate again and mirror.

Paste the bells in the smaller circle, resize to 75%, moving below the frame layer.

Paste your tube, mirror and adjust in the larger frame, click inside the frame with your magic wand, expand by 5,  invert and delete, select none.
Duplicate, Gaussian Blue at 4, change the blend mode to screen or one you prefer.
Apply the xero filter, Soft Vignette with these settings.
Elliptical,  Sharp checked,
Foreground color, Diagonal Dots,
1, 1, 1, 255

Paste your tube on top of the frames, resize to 55%, if using the same one I am and place off center a bit.

Paste the tree on the right side, below the paper layer of the frames.
Paste the house below the tree layer and place how you like.

Resize the presentsbear to 85% and place on the left side.

Resize the Christmas Pudding to 40% and place by your tube.

Resize the cocoa cup 2 to 50% and place by the Christmas Pudding.

Paste and resize the gift boxes to 70%, place below the tube layer on the right, duplicate, mirror and move back over to the right and above the first gift boxes.

Resize the wordart Joy to 55% and place in front of your tube layer.
Resize the sleigh cookie to 50%, place on the right between the gift boxes layers.
Resize the gingerbread man to 40%, place below the cocoa cup on the left.

Adjust all your elements to your liking.

Paste paper 8, apply your mask, move to the bottom and adjust to fit your tag.

Add any other elements you would like.
 

Once happy with it all, close off any backgrounds, merge visible.
I added the xero filter Clarity once I merged, this is optional, you may like to just sharpen your tag.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Cute Pumpkin Girl

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  VeryMany.

You need a license to use this art work. Please do not use without a license.

 You can find this art at their Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Halloween 1 by Top Cats Tagz  HERE
There are 4 kits, different colors, I used the orange one.
 WSL Mask 84  HERE
Filter
EyeCandy 5-Impact-Gradient Glow

Font of Choice, I used Witches Magic

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

As usual I open a new image, size 800 x 800.

Paste paper 7, apply your mask, delete and merge group.

Paste element 11, free rotate to the left at 10 degrees, all layers Unchecked.
Click inside with your magic wand, expand by 5, paste paper 1, invert, delete, now paste your close up tube, delete, select none. Move the paper and tube layer below the frame layer.

Duplicate  your tube layer, go to Adjust, Blur, Gaussian blur at 3, change the blend mode to hard light, merge down.
Paste element 22 on the left upper side below the paper layer of the frame.

Resize your tube to 55%, if using the same as I am and place on top of the frame on the left side.

Resize element 6 to 50%, mirror and move back to the left side under your tube layer, free rotate to the left at 10 degrees.

Resize element 17 to 60%, place on the right side, duplicate, resize that one to 85% and place by the first pumpkin.
Paste element 30 below the pumpkin layers on the right side.
Element 4 resize to 65%, mirror and place on the left side by the witch.
Resize element 1 to 40%, mirror, duplicate and place at the upper right side of your tag.

Resize element 20 to 50%, free rotate to the left at 15, and place by the house on the left, moving one below the house layer, erase the grass that is showing.
Resize element 43 to 50%, place on the left side, below the cat layer, duplicate, free rotate to the left at 15 and move to your liking.
Crop your tag to be sure no stray shadows are on the edges of your tag.
If you are going to do the Signature and Avator, do not merge yet.

Signature tag
Open a new image 600 x 250, paste your mask from your tag, duplicate, mirror and move over some.
Paste element 49 on one side, duplicate, mirror and adjust.

Then close off your tube layer, pumpkins layer, drink layer, cat, and shoes.
Copy merged and paste on your mask layer, resize to 95%.

Now back to your tag open all the layers you closed earlier.
Paste your tube and move to the left side some.
Paste the larger pumpkin and resize to 90%, place on the right side, then paste the smaller pumpkin and resize to 85% and place on the right side.
Paste the drink, resize to 85%,  move below the pumpkins on the right.
Copy and paste one of the bats and place on the upper right top, duplicate, mirror, resize to 65% and place on the left.
Paste the boots below the tube layer on the left side, resize to 85%.

Now add your frame
I used Eye Candy 5-Impact, Gradient Glow for my frame with these settings,
Click the Basic tab,  then Outside Glow, Mask Selection checked,
Glow radius 10,  soft corners 7,  Overall Opacity 100,
Distortion lump size 53, Gradient smoothness 100.
If it does not show up, add a new layer and fill with a color and merge your tag, then apply the filter.
Add your copyright and name now.

Avator
Whatever size your forum or group allows.
I did mine 150 x 200
Paste your signature tag, move how you like it, merge visible, add your frame and then add your copyrights and name.
I used Eye Candy 5-Impact, Gradient Glow for my frame with these settings,
Click the Basic tab,  then Outside Glow, Mask Selection checked,
Glow radius 10,  soft corners 7,  Overall Opacity 100,
Distortion lump size 53, Gradient smoothness 100.
If it does not show up, add a new layer and fill with a color and merge your tag, then apply the filter.
That's it

Hope you enjoyed doing my tut.