Cute As A Bunny

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria.

The tube is called Bunny.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Cute As a Bunny by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Melissaz Creationz Mask 1  HERE

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 11, apply your mask, delete and merge group.
Resize your mask larger to 125% or so to fit your tag better.

Paste element 05, resize to 85%, move down some.
Paste element 06, at the bottom of the frame, resize to 85%, duplicate twice, mirror one and move the other to the center.
Click inside your frame layer with your magic wand, expand by 5, paste paper 3, invert, delete.

Resize your tube to 25%, if using the same one, place on the grass layer.

Paste element 07 above the mask layer on the left, resize to 85%.

Paste element 02 below the tube layer on the upper right, resize to 90%.

Paste element 20 above the frame layer on one side, resize to 85%, duplicate, mirror, duplicate one, resize to 85%, move to the center area where you like.

Resize element 40 to 65%, place below the tube layer at the bottom of the frame, duplicate, mirror.
Resize element 17 to 65%, place above the grass layers, duplicate as many times as you like and place where you like.

Paste element 25 above the tube layer on the grass.
Paste element 27 below the rabbit.

Resize element 24 to 50%, duplicate a couple of times and place where you like.

Resize element 09 to 40%, paste on the basket, erase the loop part.

Resize some of the eggs to 50%, place on the basket, take your free hand tool, draw around the bottom half of the eggs and delete, making them look like they are in the basket.
Paste element 32 and 33 above the basket layer at the bottom.

Resize element 29 to 50%, paste below the basket behind the eggs, duplicate, move over to the right and below the grass layers.

Resize element 08 to 50%, place just above the grass layers, duplicate once or twice and move where you like.
Resize element 19, resize to 50%, duplicate, place where you like.

Paste element 10 on the mask layer, duplicate, mirror, flip and adjust both to your liking.

Paste element 21, duplicate 3 times, moving one down, one up and one more in the center.

Resize element 23 to 50%, duplicate, place on the grass layers.

Resize element 13 to 50%, place by the grass on one side, duplicate, mirror, duplicate again, move more to the center.

Resize element 28 to 50%, place by the basket on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Spring Time

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria.

The tube is called Carrie.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Hop Into Spring by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Melissaz Creationz Mask 5  HERE
WSL_Mask 84 HERE

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

I will tell the flowers I used, but feel free to use any or all the ones you prefer.

Open a new image 800 x 800 or one you prefer.
Paste paper 6 or one of choice, resize Mask 5 larger to 125%, apply, delete and merge group.
Paste paper 6 again and apply WSL_Mask 84 this time.

Paste element 04, resize to 90%, move toward the bottom more.

Paste element 14, resize to 80%, place on the right, duplicate, mirror, duplicate again and move to the center more.

Resize your tube to 35%, if using the same one I am, mirror, paste more to the left side, and below the grass on the right.

Paste element 18 on one side below the grass layers, duplicate mirror.
Paste element 25 on the left below the flower layer, duplicate and move down some, duplicate, move over to the right more.
Paste element 35 on the left below the tube layer by the arm, duplicate, move up a little, duplicate, mirror, duplicate again and move over a little.

Paste element 24 below your tube layer by the leg, duplicate, move over more to the right and down a bit.

Resize element 08 to 85%, place on the left side of your tube. Paste and flowers you would like to put in the basket or eggs.

Resize element 11 to 80%, place in front of your tube where you like.

Resize element 26 to 65%, place in front of the basket.
Resize element 06 to 70%, place below the rabbit layer on the right.
Resize element 34 to 65%, place below some of the flower layers, where you like, duplicate and move over to the center more, duplicate again and move to the left by the tube's hand.

Paste the wordart at the top, take your free hand tool, draw around in the air, copy and paste as a new image, then delete the one on your tag, now paste the copy one onto your tag and move down and over to the right more.

Paste element 02 at the top below the tube layer, resize to 85%, erasing any of the outer clouds you do not want.

Resize element 19 to 55%, paste at the upper left behind the tube, duplicate, mirror, move down by the fence more, erase the ones on the right, duplicate, move to the top of the wordart.

Paste element 22 on the fence layer, adjust how you like it.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Pimptress

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fidorova_Maria.

You need a license to use this art work. Please do not use without a license.

  You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap Pimptress by Kristen-Toxic Desirez  HERE
Scroll down until you see the kit Pimptress
Check out the rest of the blog HERE
MPM Mask 7  HERE
Check out the rest of her blog HERE

Filter
Mura Meister Copies-Tiling (angle)

 Font of Choice, I used Magnolia Light

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 5, make larger to 115%, apply your mask,  delete, merge group.
As always adjust your mask to fit your tag how you prefer.

Resize your tube to 30%, place on the right side.
Paste the car on the left side above the tube layer, erase any part of the tube showing below the car.

Paste the city scene below the tube layer.
Paste the sparkles on the city scene.
Paste the moon below the tube layer on the left.
Paste the Pimptress Beaded String 1 at the bottom above the car layer.

Resize ring 1 to 40%, place on the beaded wordart at the right side.
Resize ring 2 to 40%, place by the first ring.

Resize the dollar sign to 80%, place on the upper left side, below the city scene.

Resize the shoe to 35%, paste by the car on the left, duplicate, mirror, move back to the left below the first shoe.
Resize lips 2 to 45%, place at the upper right below the tube, lower the opacity to 65%.
Resize the whip to 45%, place on the left side by the shoes above the wordart layer.
Resize the comdom to 50%, place on the left below the whips and shoes.

Resize the crown to 25%, free rotate to the right at 15 degrees, place by the rings on the right.

Resize the tickler to 50%, free rotate to the left at 90, place below the crown layer.
Resize the pimptress bag to 40%, place on the right by the hand of the tube.

Resize the star curtain to 90%, paste on the mask layer, lower the opacity to 65%.

Resize the wordart Hollywood to 50%, apply Mura Meister Copies-Tiling (angle), change the tiling gap to 2. 
Then apply the same mask you used before, delete, merge group, change the blend mode to Luminance (L), move just above the mask layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.