Baby it's Cold Outside-Forum Set

 

 

This tut was written for those with a basic knowledge of psp.

I am using the Awesome artwork by Arthur Crowe 

The tube is called Snow Ball Sexy

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap  Winter Wonders by Gimptastic  HERE

Check out the rest of the blog HERE

RD Mask Set 139 Mask 3 HERE

These are for Timeline mask, I just resized it.

Check out the rest of the blog HERE

Filters

Mura Meister Copies-Glob

AAA Frames-Foto Frame

Font of Choice, I used The Heart of Everything

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Forum Set

Signature tag

Open new image 600 x 250, fill with a gradient with the foreground white and the background a color from your tube, I used #d6d6d6,  angle 45, repeat 10, paste paper 2, resize the mask to 80%, paste, delete, merge group.

 

Take your free hand tool, draw out a rectangle, add a new layer, fill with the light gray color, change the blend mode to soft light. Then Effects, Edge Effects, Enhance, then Enhance more 3 times, duplicate, mirror.

 

Paste your middle size tube, resize to 80%, place on the right side, duplicate, Adjust, Gaussian Blur at 4, change the blend mode to Screen, merge down.

 

Paste the tree on the left just above the mask layer and place how you like it, sharpen once.

Resize the deer to 60%, paste above the rectangle layers by the tree, duplicate, mirror, place toward the bottom center.

Resize the sign to 55%, paste below the deer layers, free rotate to the left at 15 degrees.

 

Resize the snowballs to 50%, paste, apply Mura Meister Copies-Glob, move down to the right how you like, duplicate, mirror, adjust, duplicate again, move below the center deer.

 

Paste plant 1 above the tree layer on the left, duplicate, move to the right some and down.

Being on the top layer, paste the falling snow on the left, duplicate, move to the right and erase any part on the face of your tube you do not want.

Paste the icicles below the tube layer at the top, change the blend mode to Screen, sharpen once.

 

Type out what you want on your tag, I typed Baby it's Cold Outside and move it below the falling snow layers at the top on your rectangle, add a fat white gradient glow with EyeCandy 4000.

Don't merge your tag just yet, you will be using it for your Avator, once the Avator is done,

then you will merge visible and add your frame.

 

For the Avator

Open an image to a size you use for your forums or groups, I did mine 200 x 200.

Copy the background layer, paste.

Close off your tube and wordart on your signature tag, copy merged and paste, resize to 80% or a size that will fit your Avator size, sharpen once, type out your wordart in smaller letters, add your gradient glow, merge visible.

Apply AAA Frames-Foto Frame with these settings to both the signature tag and avator once you have them merged.

Width 3, 0, 0, 0,

255, 255, 255,

Opacity 50

Click on the little drop down where you see the word default and change that to white.

Take your magic wand, click on the frame area, you might have to click several times, then apply noise at 50%, on both.

Add your copyright and name, merge visible.

That's it

Hope you enjoyed doing my tut.

Hot Stuff

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Hell Babe

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Burning_Halo HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Mask 209 by Simone HERE
Scrappy Bit of Fun Animation 134 by Simone HERE
Check out the rest of the blog HERE

Font of Choice, I used Your Fear

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 4, resize larger to 130, paste your mask, delete, merge group.

Paste the mesh, duplicate, flip and adjust.

Paste frame 1, move to the left a bit, duplicate, change the blend mode to burn, merge down.
Free rotate to the left at 10 degrees.
Click inside with your magic wand, expand by 5, paste paper 5, invert, delete, move below the frame, mirror your middle size tube, paste, delete, select none.
Duplicate the tube, change the blend mode to burn, merge down.

Resize your full tube to 85%, place on the right side.

Paste the fire below your tube layer, duplicate, move above the tube layer and erase the parts on the left of the tube.

Paste the word Hell and change the blend mode to Luminance (Legacy).

Resize Ghost Satan to 95%, place behind the tube on the right.

Paste the candle on the right below the Ghost Satan.

Resize the Heel to 60%, mirror, place on the left side by the H of the word Hell.

Paste the label, hot stuff below the tube layer by her hand, change the blend mode to hard light.

Resize the flair button to 75%, place below the fire layer on the left.

Add any other elements you would like, make it your own.

Animation if you would like to do this part
Keep a white background on your tag, resize all layer to 80%, do not merge your tag.
Add your copyright and name now also.

Close off your tube layer, the fire above your tube, the copyright and name, copy merged to animation shop.
Make 21 layers of your tag to match the animation layers.
Edit, select all, copy on the animation, then go to your tag, click, edit, select all, paste into selected layer, paste the animation on the right side of your tag.
Go back to psp, open your tube layer and fire layer, close off everything else, copy merged these two layers to animation, make 21 layers, then edit, select all, edit, paste into selected frame

If no animation then do this
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Whatever-Check Your Bumps BCA

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Color Girl

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap OH My PINK by Lady Dragus HERE
Check out the rest of the blog HERE
Mask BCA 1 by Bam Bangers on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Wordart by Millie HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle
Eye Candy 4000-Gradient Glow
Font of Choice, I used Casablanca Noir

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 14, apply your mask, delete, merge group, adjust to fit your tag later.

Paste element 15, click on the parts you would like to add noise, add noise at 40% or more if you prefer.

Resize element 23 to 40%, apply Mura Meister Copies-Encircle, move below the clock.

Paste your tube on the left side, resize to 75%, move below the clock, duplicate, move above the clock and erase so the number 6 and 3 show.

Paste element 65 on the right, resize to 55%, move below the clock, duplicate, move above and erase some so the number 12 shows all.

Resize element 100 to 50%, place by the glass on the right how you like.

Paste the wordart Check your bumps for lumps on the glass, add a fat white gradient glow, using Eye Candy4000, gradient glow, width set on 3, resize to 50% and place on the glass.
Then paste the wordart, Positively Pink year round below the clock layer, duplicate, move above the tube layer and erase so the number 3 shows and any part of the leg of the tube showing over the wordart also erase.

Resize element 88 to 50%, place just above the flower circle layer on the left, duplicate, mirror, move above the glass layer and place how you like.

Place sparkle 2 on the flower circle on the upper right, duplicate, flip, go back to the top right, duplicate, mirror.
Resize element 92 to 25%, place by the glass on the right.

Paste element 19 just above the mask layer at the bottom, duplicate, mirror, adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

BCA Keep Fighting

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called BCA Sexy

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Freaky Chic by Gimptastic Scraps HERE
Check out the rest of the blog HERE
Mask 62 of MB and SW HERE
Check out the rest of the blog HERE

Font of Choice, I used Master of Break

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 10, resize larger to 130%, apply your mask, delete, merge group.

Paste frame 5, free rotate to the right by 10, click inside with your magic wand, expand by 5,
paste paper 4, move below the frame, invert, delete, now paste your middle size tube, adjust to your liking, delete, select none.

Resize your smaller tube to 80%, place on the left side above the frame.

Resize the arrow to 60%, place at the upper right above the frame.

Paste the candle to the bottom right.

Resize boot 2 to 75%, place on the left above the tube layer, duplicate, mirror and move back to the left.

Resize the tank top to 75%, free rotate to the right at 10, place below the candle layer on the right.
Resize flower 2 to 65%, place below the candle layer toward the center more.
Resize flower 1 to 65%, place below the purple flower.

Paste the swirl below the tube on the left, free rotate to the right at 90, adjust.

Resize star 2 to 50%, place at the upper right on the frame layer.

Resize the ipod to 65%, free rotate to the left at 15, click inside the screen, paste your smaller tube with the ribbon showing, invert, delete, select none, change the blend mode to hard light.
Soften the edges with your soft tool brush.

Resize the buttons to 70%, paste by the candles.

Add any saying you would like, I put Keep Fighting.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

USA Cutie

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Cute Eyes

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Happy 4th of July by Top Cats Tagz from Creative Misfits Creations blog  HERE
WSL_Mask 84 HERE

Font of Choice, I used Stripes and Stars

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

This is a quickie

Open a new image 800 x 800 or one you prefer.
Paste paper 14, apply your mask, delete, merge group.

Paste element 31, click inside with your magic wand, expand by 5, paste paper 4, invert, delete, move below the frame.

Paste your tube below the frame off to the left side, then take your selection tool,
draw around the top half of your tube, promote selection to a layer, select none and move above the frame layer.

Resize element 54 to 65%, place on the paper layer in the frame on the right, duplicate, resize to 50%, move over to the left a bit and down some.

Resize element 44 to 50%, place at the upper right on the frame, duplicate, mirror.
Paste element 28 at the bottom on the mask layer, duplicate, move to the top.
Paste element 6, resize to 65%, place on one side, duplicate, mirror.
Paste element 43 at the bottom, resize to 65%, place in the center.
Paste element 19 on the right side, resize to 65%.
Resize 33 to 55%, place by the hat.
Resize element 52 to 35%, place at the upper right.
Resize element 45 to 50%, place on one side below the flower layers, duplicate, mirror, adjust to your liking.
Paste element 3 below the flower layers at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Celebration (3 Piece Set)

 

 

with or without the tube

 

  This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Heroic Girl

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap 4th Celebration Blog Train by Melissaz Creationz  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE
DD Patriotic Mask 3 HERE
Check out the rest of the blog HERE

Filters
Screen Works-Light Gauze
Mura Meisters Copies-Tiling

Font of Choice, I used Acryle Script

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply DD mask 3, delete and merge group, resize larger to 115%.
Paste paper 5 again, apply WSL Mask 84, delete, merge group, select all, float, defloat, resize your full tube to 65%, paste on the left, apply Mura Meister Copies-Lines, 1/n Fade out checked, invert, delete, select none.
Duplicate the tube, Adjust, Blur, Gaussian blur, number on 4, change the blend mode to Screen, then apply the Screen Works filter-Light Gauze.

Resize element 15 to 85%, apply Mura Meister Copies-Encircle, paste below the mask layers.
Paste element 4 below the star circle you just made on one side, duplicate, mirror.

Resize your full tube to 65%, paste on the right side.

Paste element 2 below the tube layer, apply Mura Meister Copies-Tiling with the gap number set to 10, erase the outer parts you don't want or use your free hand tool and go around the outside ones and delete. Use a white drop shadow first then your darker one.

Paste element 15 between the music line, duplicate and move down between the other one, same drop shadow, white first.

Duplicate your tube and move to the top layer, erase the legs covering the music lines at the bottom and erase the legs showing below the lines.

Resize element 12 to 35%, place on the left by the music note, duplicate, move up, duplicate, mirror, duplicate, move down, having all above the music lines.

Add any other elements you would like.
Once happy with your tag, close off any background if you used one, merge visible, resize first, then add your copyright and name.

 Signature tag

Open a new image 600 x 250, paste paper 5.
Resize your full tube to 70%, paste and move so just the flag part is showing more toward the left side, apply Mura Meister Copies-Lines, 1/n Fade out checked, duplicate, Adjust, Blur, Gaussian blur on 4, change the blend mode to screen, apply Screen Works-Light Gauze, merge down.

Paste your full tube to the left, resize to 70%, being on the top layer now.

Resize element 2 to 60%, paste below the tube layer and move the edge touching the left side.
Paste element 15 at the top how you like below the tube layer, duplicate, flip.

Add any other elements you would like.
For the frame I used AAA Frame-Foto Frame
 Width 3, Matte 2, Opacity 50, all other numbers on 0.
Add your copyright and name.

Avator
Open a size that is allowed for your group or forum, I did 200 x 200.
 Copy your signature tag, paste, resize to 85%, place how you like, with or without the tube showing, once happy, merge visible and add the same frame as before.

 Add your copyright and name.

 

That's it

Hope you enjoyed doing my tut.

Summer Moment (3 Piece Set)

 

 

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Beauty Girl Spring

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Summer Moment by Molemina  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE

Filters
dsb flux-gears
AAA Frame-Foto Frame

Font of Choice, I used AL Sandra

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 2 to 23%, apply the dsb flux filter-gears with both numbers on 65, then apply your mask, delete and merge group.

Resize cluster to 15%, paste on one side, duplicate, mirror.

Paste your tube below one of the clusters, resize to 90%, duplicate, move above the cluster and erase the parts you don't want showing. I left the hand above the log.
Duplicate both tubes, apply the Gaussian blur at 4 on each of the duplicated ones, then change the blend mode to hard light on each one.

Resize wordart 3 to 15%, paste on the mask layer on the right side.

Resize element 85 to 10%, paste on the right above the wordart.

Resize element 15 to 10%, paste in front of the basket, duplicate, mirror, move about the cluster and up some.

Resize element 8 to 15%, paste below the basket layer on the right and move up, duplicate,  move above the flowers on the basket, duplicate again, mirror, move up some, duplicate again, move over more to the left and down.

Resize element 7 to 5%, duplicate a couple of times and place above the tube layer at the bottom where you like.

Resize element 23 to 25%, paste on the tube layer by the hand, duplicate, mirror, paste below the tube layers, move up more on the left.

Resize element 14 to 15%, paste below some of the flower layers, duplicate, mirror.
Resize element 51 to 10%, paste at the top by the flowers, erase the ones you don't want.

Add any other elements you would like, make it your own.

Once happy with it all, close off any background and merge visible, resize and add your copyright and name.

 Signature tag

Open a new image 600 x 250, resize paper 2 to 20%, paste, apply the dsb flux filter-gears, both numbers set on 65, sharpen once.

Paste your tube a little off center, duplicate, Gaussian blur at 4, change the blend mode to hard light, merge down, sharpen once.

Resize the cluster to 10%, paste on the left side above the tube layer, duplicate, mirror.
Resize element 7 to 5%, place below the log on one side, duplicate, move over by the other log, duplicate again and move to the center and down just a bit.
Resize element 17 to 10%, paste between the flowers, duplicate, mirror.

Resize element 85 to 10%, paste on the paper layer on the right.
Resize element 15 to 10%, paste on the right below the tube layer, duplicate, move to the left and down some.
Resize element 23 to 25%, paste on the tube layer and move to the right how you prefer, duplicate, mirror, move below the flower layer.

Resize element 8 to 10%, paste just above the basket on the right.

Resize wordart 3 to 10%, paste on the paper layer on the left side, do not merge.
Add any other elements you would like.

Once you have completed your Avator,  reopen the tube, merge visible and frame using AAA Frame-Foto Frame
 Width 4, Matte 1, Opacity 50, all other numbers on 0.

Avator
Open a size that is allowed for your group or forum, I did 200 x 200.
On your signature tag, close off the tube layer, copy merge and paste on your new layer, resize to 90%, adjust to your liking, merge visible, crop.

Add the same frame as for the signature tag.

Once happy with it all, add your copyright and name.

 

That's it

Hope you enjoyed doing my tut.

Howdy

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Ride Me

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Chaps by Digicats (& Dogs)  HERE
Check out the rest of the blog HERE
WSL_Mask 84 & Mask 350  HERE

Filters
Mura Meister Copies-Encircle
Xero-Artworx

Font of Choice, I used I.F.C. Los Banditos

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 18 or one of choice, apply Mask_84, delete and merge group, resize mask larger to  110%.
Paste the grassy border, apply Mask_350, delete and merge group.

Frame 4, take your free hand tool, draw around the frame part, delete, paste the belt on the mask layer, apply Mura Meister Copies-Encircle, if part gets cut off, move the belt down a bit and try the Encircle again, then click inside with your magic wand, expand by 10, paste paper 19, invert, delete, move below the frame layer you just made.
Apply the xero filter-Artworx to the frame.

Paste your tube, resize to 80%, place in the center or where you prefer.

Paste the Pine tree on the left.

Resize the bull to 50%, place on the left below the grass layer, and hide the bottom part of the tree trunk.
Resize horse 2 to 55%, mirror, place below the grass layer on the right.

Paste the Western tree 01 on the right below the horse and hide the bottom of the tree, erase some if you need too, duplicate, move more to the center and down a bit behind the tube.
Resize the stone and scrub to 55%, duplicate a few times, place below the grass layer where you like, duplicate one again and resize to 55%, duplicate this one a couple more times and place them above the grass layer where you like.

Paste cactus 6, below the grass layer on the right side of the tube, duplicate, move below the tree layer, resize to 75%, duplicate, mirror.
Resize the buffalo skull to 30%, place on the grass layer on the right.
Resize cactus 1 to 30%, place below the skull on the right, duplicate, mirror, duplicate, move just above the large cactus at the bottom.
Duplicate as many times as you like and place around the grass layer.

Resize eagle 2 to 35%, place at the upper right, duplicate, mirror, move where you like on the left side.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Any one can be a Father

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Blue Eyes

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Dear Old Dad by Gimptastic HERE
Check out the rest of the blog HERE
Rachael Designs Mask Set 85_3  HERE
Check out the rest of the blog HERE
Filters
Xero-Artworx

Font of Choice, I used Great Vibes

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 9 or one of choice, resize larger to 135%, apply your mask, delete and merge group, flip.
 Adjust your mask later to fit your tag better.

Paste frame 3, click inside with your magic wand, expand by 5, paste paper 3, below the frame, invert, delete, now paste your middle size tube, if using the same one I used, delete, select none.
Duplicate the tube, Adjust, Blur, Gaussian blur at 4, change the blend mode to hard light or one you prefer.
Apply the Xero filter, Artworx with the default settings, merge down.
Close off your mask layer, merge visible, duplicate, resize to 50%, free rotate to the right at 10 degrees, duplicate, mirror one, place both on the right side. Duplicate one to 50% again and move down to the bottom.
Sharpen the pictures once.

Move the larger picture to the left a bit.

Paste the balls below the smallest picture at the bottom.
Resize the radio to 50%, place on the right below the balls layer.
Resize the camera to 50%, place by the smallest picture at the bottom.
Resize the Binoculars to 50%, place below the camera layer.
Resize beer 2 to 75%, place on the left, resize beer 3 to 60%, place in front of the beer bottle on the left.
Resize the keys to 35%, place by the radio.
Resize the dog to 85%, place behind the beer bottle on the left.
Resize the watch to 35%, place in front of the beer glass on the left.

Paste the leather strap, free rotate to the right at 90, move to just above the mask layer and out from the frame some, duplicate, mirror, adjust.

Type out what you would like your wordart to say and place at the bottom.
I typed out using Great Vibes font

"Anyone can be a Father...
but it takes someone special to be a dad."...
                                  -Anne Geddes

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Irish Girls Rock Forum Set

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.
Tube is called St Patrick Babe
 

You can find his art at his store HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Andrew Filters #44-Fabric Wrapper
Mura Meister-Copies
Xero Filter-Radiance
UnPlugged Tools-Interlace

Font Worstveld for name
Oh la la for pixel workart
 

Drop Shadow usually V2 H2 50 black or
whatever one you prefer

Let's get started

*Remember to add your drop shadow as you go along*

I took an old tut I did and revamped it.

Open a new image, 600 x 250 and fill with color of choice, I used #7eac7d.
 
Paste your tube and apply Mura Meister-Copies-Wallpaper rotate at default settings.

Apply Andrews Filter #44-Fabric Wrap at default settings.

Then go to Adjust, Blur, Radial Blur with these settings
Twirl, 50, 10 0, 0, 10, Elliptical checked.
Then apply Andrew Filter #44 again, change the blend mode to overlay.
Now apply Unplugged Tools-Interlace with these settings, twice.
5, 20, 1, 0

Take your selection tool and draw out a small rectangle about half way across, add a new raster layer and fill with #56944c, Effects, Edge effects, enhance, select none.

Type out your wording of choice, I typed out Irish Girls Rock, using Oh la la for the wording, set on 10 Pixels and the Bold button pushed in, merge down, duplicate and move one to the left side top and the other to the right side bottom.

Paste your full tube and move below the rectangle layer, duplicate and move to the other side, merge these together, change the blend mode to overlay or one you prefer, apply Mura Meister Copies-*Line, with the 1/n Fade out checked.
Apply xero filter-Radiance.

Paste your medium size tube in the center and adjust to your liking.
Duplicate, gaussian blur at 4, change the blend mode to overlay, merge down, then merge visible and add AAA Frames-Foto frame with these settings
4, 0, 0, 3,
0, 0, 0, 50
Add your copyright and name.

For the Avator
Open a new image 150 x 150 or a size of your choice.
Paste your tag and resize to 70% and place how you like it.
Apply the AAA Frames-Foto frames with same settings as before.
Be sure all copyrights have been added to your tag.
Add your name and that is it

Hope you enjoyed doing this tut.

Here is the original I did back in Feb 23, 2013 using Danny Lee when he was at Scrap and the City.
Now you can find his art at Scraps N Company HERE

 

 

Born To Ride Babe

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Biker Skull Babe.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE
 

 Supplies Needed

I used PSPX...but any of them should work.

 Scrap Bad Ass Biker Babe by Mizteeques  HERE
Scroll down a bit
Check out the rest of the blog HERE
WSL_Mask 84  HERE

Filters
Tramages-Mo'Jellyfish

Font of Choice, I used Acryle Script

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 1, apply your mask, delete and merge group.
Apply the Tramages Filter-Mo'Jellyfish with these settings on the mask layer.
160, 160, 132

Paste element 36, resize to 85%, free rotate to the right at 15 degrees, move below the mask and over to the right just a bit, duplicate, change the blend mode to burn, merge down.

Paste your close up tube, mirror, resize to 80%, apply the same mask to the tube, delete, merge group, duplicate, Gaussian blur at 5, change the blend mode to screen, merge down. Lower the Opacity to 83 or so.

Resize your tube to 70%, paste on the left side on the top layer.

Resize element 1 to 70%, paste on the tube layer.
Resize element 24 to 75%, paste on the left below the tube layer, duplicate, mirror.

Resize element 23 to 25%, place by the bike.
Resize element 19 to 30%, place by element 23, go to Adjust, Hue and Saturation,
colorize, with both numbers on 0.
Resize element 3 to 10%, paste on the hat.
Resize element 40 to 60%, paste on the frame at the upper right.

Paste element 48 above the tube layer at the bottom, duplicate, move up to the left and on the mask layer, be sure to watch the edges, you might want to erase a little of them.

Resize element 9 to 65%, paste below the mask layer, duplicate, flip, duplicate free rotate to the right, duplicate, mirror, adjust as needed.

Use wordart of choice, I used #3 and pasted it on the top layer at the bottom, added a medium white gradient glow.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

All You Need is Love-No Scrap

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Baby Heart.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE
 

 Supplies Needed

I used PSPX...but any of them should work.
Template 148 by Becky HERE
Check out the rest of her Blog HERE

WSL_Mask 84  HERE

Filters
PhotoEffex-Scanlines

Font of Choice, I used Acryle Script

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 50
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit d to duplicate and close the original, delete the credits.  Then go to Image, Canvas size, making it 800 x 800 or a size you prefer.
Fill with a color of choice below the template layers, add your mask, delete, merge group, then go to Effects, Texture Effects, Weave
2, 10, 1 color white in both boxes, gap filled checked.

Select the pink rectangle, add a new raster layer, fill with a gradient, using a color from your tube for the foreground and white for the background.
Click on gradient, change the angle to 45 and repeat to 4.

Black rectangle, apply the filter PhotoEffex-Scanlines
width on 2, spacing 2
50, 50,
100, 0
Frame fill, fill with white, go to Effects, Texture Effects, Weave
2, 10, 1 color of choice for both color boxes, gap filled checked.

Shape frame background add noise at 50%.

Shape frame, select, add a new raster layer, fill with color of choice, add noise at 50%, then go to Effects, 3D Effects Inner Bevel Effects
Shape2, width 2
8, 4, 4, 0
48, 36, 42 color white
Add noise at 50%

Square frame fill, new layer fill with white.
Square frame white background, add noise at 50%.

Square frame black background, leave as is or fill with a color from your tube.
Square frame, fill with a color from your tube, add noise at 50%.

Paste your tube on the square frame fill, duplicate, move above the frame, erase the parts you do not want showing on both.

Heart fill, select, new layer, fill with white, paste your tube how you like, invert, delete, duplicate, go to Adjust, Blur, Gaussian Blur number on 5, change the blend mode to scree, select none, merge down.

Add noise at 50% on the white frame background.
Leave the black heart background as is.
Heart, new layer, fill with the gradient you used before.

Love white background add noise at 50%
Love add a new layer, fill with the gradient as before, add the bevel effect with the same settings as before.

Select the flowers, new layer, fill with a color of choice, bevel effect as before, add noise at 50% on the white background, merge the flower layers together, duplicate, mirror and place on the left how you like them.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Fantastic New Year

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Fantastic New Year.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE
 

 Supplies Needed

I used PSPX...but any of them should work.

 Scrap New Beginnings by Digicats (and Dogs)  HERE
Check out the rest of the blog HERE
WSL_Mask 84  HERE

Filters
EyeCandy 4000-Gradient Glow
Xero-Porcelain, Mistifier
Font of Choice, I used Signarita Anne

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 50
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, fill with #18c8c8, apply your mask, delete and merge group. 
Then go to Effect, Texture Effects, Weave with these settings
2, 10, 1, color black on both and fill gaps checked.
Select all, float, defloat, paste your close up on one side, mirror the original, then paste on the other side, invert and delete both tubes, select none.
Apply the Xero filter-Porcelain to both of these tubes, then
Mistifier with these settings
200, 175,
255, 255, 255

Paste the city scape, resize to 90%.
Paste the limo down at the bottom of the city scape.

Paste the New Years ball on the left, below the city scape., resize to 90%, erase the base part showing at the bottom.

Paste Fireworks 01, duplicate twice and move where you like. I moved the duplicated ones below the mask layer on each side.

Resize your tube to 65%, place in the center.
Resize the Confetti Trumpet to 40%, mirror, place at the bottom by your tube,
duplicate, mirror.

Paste the Count down coil at the bottom, apply a fat black gradient glow, erasing the coil part completely.
Flip the Snow Swirl, then paste at the bottom above the tubes on the mask, duplicate, mirror and adjust below the car.

Resize the champagne glass to 40%, paste at the bottom by your tube.
Resize the bucket and bottle to 40%, place below the glass layer on the left.
Resize the blower to 30%, paste by the bucket.

Paste the Confetti on the city scape, add noise at 50%.
Resize Auld Lang syne to 35%, paste on the new ball on the left.

Resize the balloons to 70%, paste below the city scape on the upper right behind the tube layer.

Resize the noise maker to 35%, paste by the tube, erase the chain holder.
Resize the tag to 35%, place on the right side below the wordart.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Cute Winter Cutie (Forum Set)

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Cute Winter

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Christmas White by Scrap in Designs by Peace  HERE
Check out the rest of the blog  HERE
Animation by Simone HERE
Check out the rest of her blog HERE

 

Font of Choice, I used Cardinal

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Signature tag
Open a new image 600 x 250, paste paper 4.
Paste element 112, move to the bottom, duplicate, mirror.
Resize element 94 to 35%, paste in the center of the tag.
Resize element 93 to 35%, place below the snow layers on one side, duplicate, mirror.
Resize element 62 to 35%, place on the left above the snow layers, duplicate, mirror.
Resize element 96 to 30%, paste below the tree layer on the left.
Resize element 98 to 45%, paste on the left above the sign layer.
Duplicate the tree on the left and move in front and down by the sled.

Paste your tube, mirror, resize to 95%, place on the right side.

Resize element 110 to 20%, paste in front of the sign.
Resize element 102 to 25%, mirror, paste by the snowman.
Resize element 95 to 50%, place on the right below your tube layer.

Click on your tag, select copy merge and paste as a new layer, keeping the unmerged tag to use in the Avator how you would like it.
This way you can close off any layers you do not want to use in the Avator.

Merge visible, select all, new raster layer, fill with a color of choice, contract by 3, delete, select none. Add noise at about 40% if you like.Add your copyright and name.

AnimationHope I explain the animation without confusing anyone.
To add the animated snow, close off the frame layer, copy merged to animation shop, making your tag have 30 layers to match the snow layers.
Once you have your 30 layers, click on the snow layer, go to Edit, Select All,  copy, then go to your tag, being on the first layer, click Edit, Select All, paste into selected frame.

Once that is done, go back to psp, close off the tag part and copy the frame with the copyright and name to animation shop, make 30 layers with this, then Edit, Select All, copy, then click on your tag, go to Edit, Select All, paste into selected frame, and line up your frame, paste and test your animation, if happy save.

Avator,
Open a new layer a size you prefer, I did 180 x 180, then start taking parts from your unmerged signature tag and resize and paste how you like them, once happy with it all, merge visible.   Select all, new raster layer, fill with the red again, contract by 3, delete, select none and add the noise again.
Do the same as before if you want the Avator animated also.

Be sure you add your copyright and name on the frame first.
That's it

Hope you enjoyed doing my tut.

 

Thankful for Friendships (No Scraps)

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called
Otoño
You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Millie PSP Madness Template Thankful for Friendships 02 HERE
Check out the rest of her blog HERE

 Mask 34 by Ria's PSP Paradise HERE
Check out the rest of her blog HERE

Filters
Xero-Soft Mood
 

Font of Choice, I used Big Surprise

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open the template, go to Image, canvas size, 800 x 800 or whatever size you prefer to work on, delete layer 8 and the credits.
Move the wordart however you like them.

Being on the bottom layer fill with a color of choice, I used #fb9d1b, apply your mask, delete and merge group.

Merge layer 2 down with layer 1, select all, float, defloat, new raster layer, fill with #642200, or color of choice, then go to Select, Modify, Select Selection Borders and change the number to 3, add another new raster layer, fill with #d78c34, add noise at 50%. Then go to Effects, Texture Effects, Weave and apply to the first layer color with these settings
1, 10, 1,
Weave and gap boxes checked and color white.

Select layer 3, select all, float, defloat, go to Select, Modify, Select Selection Borders again with the same number 3, add a new raster layer, fill with the same color and add noise at 50% again. Apply the same texture weave as before.

Merge layer 5 down with layer 4, select all, float, defloat, resize the full tube to 60%, paste on the left how you like, invert, delete select none, duplicate, mirror, merge down. Change the blend mode to screen and apply the Xero filter-Soft Mood.

Merge layer 7 down with layer 6, select all, float, defloat, add a new layer, fill with a gradient, with 2 colors from your tube.
Make the foreground one color, the background another color, then click on gradient, angle 45, repeat 4.

Resize your close up to 60%, paste below the wordart and adjust your tube and wordart how you like.
Select the black wordart, add a new layer and fill with a color of choice.

Take the leaves that came with the tube, resize to 60%, paste on the right side just above the circle layer.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.