Sexy Lady Lumberjack

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ted Hammond.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the  CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Nature Call by Chichi Designz   HERE
Look on the left side for FTU kits, use to be PTU now FTU
Becky's Template 243 HERE
 Moonbeams & Spiderwebs Mask 65  HERE

Filters
Xero-Clarity

Font of Choice, I use HL Thuphap 48k

Drop Shadow usually V2 H2 50, 7 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift and d to duplicate and close the original.
Delete the credits and all the wordart and the leaf vine.
Go to Image, canvas size and make it 800 x 800 or a size you prefer.

Paste paper 11 on the bottom layer of your template, just above your white background layer, apply your mask, delete and merge group, apply again, delete and merge group, resize as needed later for your tag.

Select the Lg Circle 2, paste paper 15, invert, delete, select none, delete the template layer.
Do the invert and delete on each one.
Lg Circle 1, paste paper 9, invert, delete, select none.
Lg Rectangle, paste paper 13.
Scalloped rectangle, paste paper 4.
Med circle 2 paste paper 1.
Sm circle paste paper 10.
Med Circle 1, paste paper 1.
Sm Circle 1, paste paper 4.
Scallope circle 2 paste paper 9.
Scalloped circle 1, paste paper 4.
Sm rectangle 2, paste paper 16.
Sm rectangle 1 paste paper 14, mirror your close up tube and paste, invert and delete, select none. Lower the opacity to about 60%.

Paste the grass, duplicate twice and adjust, erase the little bits on the ends.

Resize the barrel to 45%, place on the grass below one of the layers.

Paste  your tube like it is sitting on the barrel, duplicate, go to Adjust, Blur Gaussian blur at 4, change the blend mode to hard light, merge down.
Apply the Xero filter, Clarity.

Paste the mesh at the top just above the mask layer.

Resize the tree cut to 25%, place on the right side in between the grass layers, duplicate, resize to 80%, duplicate again to 80% and arrange how you want them.
Duplicate as many times as you would like and place in different areas.

Resize Tree 2 to 85%, mirror and place on the right side below the barrel layer.
Resize wooden element to 25% and place below the barrel layer and move to the left some.
Resize Tree 1 to 65%, move below the other tree and over a bit.
Resize the wheel to 50%, place on the left, just below the tube layer and have her knee just touching the wheel.

Resize birdhouse 1 to 30%, place on the upper right side on the tree.

Resize the stone trail to 40%, free rotate to the right at 45 degrees, move below the first grass layer,  duplicate, mirror, move back to the left and below the grass layer behind the wheel.

Resize the rocks to 30%, place by the wheel.
Resize the fruit to 15%, duplicate a couple of times and place in the grass where you like.

Resize the bird to 25% and place on the upper left side, duplicate resize to 75% and move down a little bit.

Resize the splat to 50% and place on the left side on the scalloped edge layer, duplicate and mirror and move out to the right just a bit.

Resize the sunray to 75%, place on the right side on the top layer.

Resize one of the doodle to 75%, then free rotate to the left at 50 degrees and place below the wheel layer on the left.
Resize the string to 50% and place by the tree cuts on the right.

Resize bird 2 to 20% and place on the wheel.
Resize the butterflies to 45%, place on the left side and erase the top 3 ones.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Enchanted Friendships

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Jessica Allain.

You need a license to use this art work. Please do not use without a license.

 You can find this art at ADI Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Forest Keepers by Gimptactic   HERE
Moonbeams & Spiderwebs Mask 65  HERE

Filters
Xero-Clarity

Font of Choice, I use Final Fantasy

Drop Shadow usually V3 H3 50 black 7

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image  800 x 800 or a size you prefer.
Resize paper 7 up to 125% and paste, apply your mask, delete and merge group,  apply the mask again, lower the opacity to around 60 or so, resize as needed later for your tag.
Paste frame 5, resize 95%, duplicate, resize to 65% and move over to the right and down some, move the larger one over and up a bit.
Take your freehand tool and draw around each frame, paste paper 7, invert and delete.
If using the same tube I am resize to 30%, paste and adjust in your frame, delete and erase the lantern showing in the frame. Duplicate, go to Adjust, Blur, Gaussian blur at 5, change the blend mode to hard light, merge down, then change the blend mode to Luminance (L). 
Apply Xero Filter-Clarity to it now.
Paste the house below the tube layer and place how you like it, change the blend mode to screen and erase the parts showing outside the frame.

Being on the top layer, paste the weather wood, duplicate, mirror, duplicate mirror, duplicate, mirror and adjust.

Go back to your orginial tube, resize to 19%, mirror and place on the right side, duplicate, go to Adjust, blur, Gaussian blur at 5, change the blend mode to hard light and merge down.

Paste flower 2 just above the mask layer on the left side toward the bottom, duplicate and move to the right a bit.

Paste branch 3, again just above the mask layer,  free rotate to the left at 90 degrees, move over to the right more. Duplicate, mirror, move below the flower layer and erase some of the dark leaf showing at the bottom.

Paste branch 2, free rotate at 90 to the right, move over to the right edge more.
Duplicate, move over to the left more, duplicate again, mirror and adjust more to the left edge, erase the larger green leaves showing.

Being on the top layer, so you can see the flower, paste flower 3, free rotate to the right at 90, move down below the paper layer of the frame at the top, duplicate, free rotate to the right, you should be able to see the stem to move it by and move down lower on the right side.
Resize flower 4 to 45%, place on the right side, free rotate to the left 35%, move below the weathered wood layers.
Resize the tall grass to 50%, place below the tube layer, duplicate a couple of time, moving below other layers and place where you like.

Resize the bag to 50%, place below the tube layer and move a bit to the left.
Resize leaf 1 to 20%, duplicate a few times and place on the weather wood in different areas.
Resize leaf 2 to 30%, being below the paper layer of the frames, duplicate a couple of times, mirror and place toward the outer edge of the frames.

Resize the hedgehog to 30%, place on the left side below one of the leaf layers.
Resize the butterfly to 30%, place on the right, take your pick tool and rotate it a bit, duplicate and mirror, move lower on the left side.
Resize deco 1 to 30%, mirror and place on the right side, duplicate, mirror and move up some on the left side.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Sexy Lumberjack

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Nature Call by Chichi Designz   HERE
Look on the left side for FTU kits, use to be PTU now FTU
 Rocked by Rachel Mask Set #31_2  HERE

Filters
Xero-Porcelain and Clarity

Font of Choice, I use HL Thuphap 48k

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image  800 x 800 or a size you prefer.
Paste paper 11, apply your mask, delete and merge group, resize as needed later for your tag.

Paste and resize frame 2 to 85%, click inside with your magic wand, expand by 5, paste paper 9, invert and delete.

Resize Tree 1 to 75%, paste below the paper layer of the frame on one side, duplicate, mirror, erase the stem below the frame that is showing.
Resize Tree 2 to 70%, paste below the first tree, adjust, duplicate, mirror and adjust again. Duplicate again, resize to 70% again and move to the top of the frame.
Paste the Mesh below the green tree layer, duplicate, flip and mirror.
Being on the top layer now, resize the branches to 50%, place on the left side, duplicate and mirror.
Resize the barrel to 50%, place on the right side.
Resize the wheel to 45%, place on the left side, duplicate, resize to 80% and place in front of the other wheel.
Paste the grass, duplicate, mirror and move over some.
Resize the rock stack to 30% and place between the wheels.

Resize the stone trail to 45%, free rotate to the right by 45 degrees and place between the grass layers and place how you like it.

Paste your tube, resize as needed, place below the frame layer, duplicate, bring to top, erase the part you do not want showing.
I left the hand so it would look like he is holding the tree cut.
Apply Xero filter- Porcelain to both tubes, then Clarity.

Resize the tree cut to 35%, move below the top tube layer, making it look like he is holding it, duplicate and resize again to 75% and place on top of the first one.
Duplicate again, resize to 75% and move over to the left some.
Duplicate and resize one more time to 75% and move over to the left more.

Resize the buzzard to 30%, duplicate, mirror and position how you like them.
I went back to the one on the right and resize to 85%, sharpen and adjusted more.
Resize the fruit to 15%, place below the one grass layer, duplicate and place by the wheels, duplicate as many times as you would like.
Resize bird 2 to 20%, mirror and place on the barrel.
Resize the birdhouse to 30%, place below the branch fence on the left side.

Resize the butterflies to 40%, place below the tube layer on the left and erase a few of them, duplicate and mirror.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Autumn Days

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Autumn Days by Dreamland Designs  HERE

Becki's Template  #244   HERE
 Rocked by Rachel Mask Set #32_1 HERE

Font of Choice, I used Great Vibes

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Duplicate your template, hold the shift key and the letter d
Close the original and delete the credits.
And as I usually do go to Image, canvas size 800 x 800.

Paste paper 15, apply your mask, delete and merge group.
Resize the grass patch to 22%, place at the bottom of the template and above the mask layer.

Select the Bg square, paste paper 8 or one you prefer, invert and delete.

On all papers, apply this
Go to Effects, Inner Bevel with #2 bevel shape
width 2,
15, 3, 4, 0
48, 36, 42
color white
Paste paper 2 on the Lg Circle, apply the bevel.
Rectangle paste paper 4, move so the lines of the paper does not show on the rectangle, invert and delete. Apply the bevel
Med. Circle paste paper 10, invert, delete.

Select leaf 2 fill in, paste paper 11, invert, delete.
On the next leaf 2, the bigger leaf, paste paper 6.
The leaf veins on top, take your change to target brush and
recolor with #5b1a07,  or you can select, new layer and fill with a color.

The small circle paste paper 14.

Select frame 2, paste paper 19, invert, delete.
Frame 1, paste paper 6, invert, delete.
Apply the bevel as before on both frames.
Select the frame fills and fill with this color  #ece1c3.
Click inside your frame with your magic wand, expand by 10, 
 paste close up tube, delete, duplicate, go to Adjust, Blur, Gaussian blur set at 5, change the blend mode to Hard light and merge the tube down.
Do this again in the other frame.

Resize the birdhouse gate to 22%, paste above the mask layer
and erase the fence showing on the right side, duplicate, mirror and adjust, then you might need to erase some of the fence again.
Duplicate the first birdhouse gate and
bring to the top, erase most of it except for a part of
the fence to show on the left side.

Paste the chicken wire on the upper left side, above the mask layer, duplicate, mirror, duplicate again and move to the center.

Resize the floating leaves to 20%, place on the right side on the grass, erase the upper leaves, duplicate, mirror, move below the fence layer and adjust to your liking.

Resize the lamp post to 30%, place on the left below the fence layer.

Resize the pinecone and leaves to 50% and place in a couple of places where you like them, moving them down a few layers. I placed 2 of mine below the circle layers and one up by the leaves.

Add your tube and place where you like it.
Resize the rabbit to 15% and place on the right side.

Resize the apple basket to 25% and place on the left side above the grass layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Be Yourself

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

  DBV Scrap Tinas NZS HERE

Becki's Template  #232   HERE
 Millie's Madness Mask #54  HERE

Filters
Xero-Porcelain

Font of Choice, I used Alex Brush

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Duplicate your template, hold the shift key and the letter d
Close the original and delete the credits.
And as I usually do go to Image, canvas size 800 x 800.

Paste paper 7, apply your mask, delete and merge group.
Paste paper 5 and apply your mask again, merge down and you may need to resize it later to fit your tag.

Select rectangle 5, paste the paper without a number, invert and delete.
Select rectangle 4,  add a new raster layer, fill with #4a557c, then resize the same paper with no number to 78%, paste, invert and delete. Change the blend mode to hard light and merge down.

Small circle 3, paste paper 4
Small circle 2 paste paper 6
Small circle one paper 5
Repeat the same paper order for the larger circles.

Select rectangle 3, paste paper 8,  adjust how you want it first then invert and delete.
Select rectangle 2 paste the same paper again,  and adjust again, invert and delete.

Resize element 26 to 55% and place on rectangle 1 of the template.
Select rectangle 1, new raster layer and fill with #303b51 or color of choice.
Delete the dotted rectangle.

If using the half tube as I am, resize it to 60%, paste below the wordart layers, duplicate bring to top, erase any over the wordart and the thumb on her hand over the wordart.
Apply xero filter Porcelain to both tubes.
Select just be yourself 2, paste paper 7, invert and delete.
On the top wordart just be yourself 1, use your change to target brush and recolor it with this color #303b51 and do the same with the smaller wordart.

Resize element 19 to 50% and place on the right side below the frame layer, duplicate and mirror.

Resize element 18 to 50% and place below the tube layer on the right, coving the larger circles.

 

Paste element 51 just above the mask layer, adjust to your liking, then duplicate, mirror and adjust again, merge down.

 

Resize element 6 to 50%, place on the right side.

 

Duplicate your tube on your tag, mirror, move below the frame layer, select inside the frame with your magic wand, expand by 2, invert and delete the excess tube layer.

Change the blend mode to Luminance (L), duplicate again, go to Adjust, Blur, Gaussian Blur at 5, change the blend mode to hard light and merge down.

 

Paste element 33 just above the smaller circle 1 layers, erase some of the outer smaller glitter, duplicate, flip and mirror, erasing any of the smaller areas you do not like.

 

Resize element 48 to 50%, place on the left side below the wordart, erase one cat, duplicate mirror and move up just below the bottle layer on the right.

 Resize element 43 to 50%, erase the keychain part, place at the upper left side and erase any other part you don't want showing.

Resize element 45 to 35% and place at the upper right on your tag, duplicate a couple of times and place where  you would like.

 

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.