A Mother's Love

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Katerina Koukiotis.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap MS-MK14 by Miriam~scraps  HERE
Trese Mask 0113  HERE
You will have to add this one to your mask folder
Filters
Xero Filter, Porcelain, Mistifier, and Clarity

Font of Choice, I used Brotherhood Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 7, resize to 21%, apply your mask, delete and merge group.

Resize frame 4 to 20%, free rotate to the left at 15, click inside
with your magic wand, expand by 5, paste paper 7, invert, delete, select none.

Paste your tube, if using the same one I am, I used the misted one.

Resize element 82 to 40%, place below the tube layer by the elbow,
erase any stem showing below, duplicate mirror and move over
to the right more, duplicate again, free rotate to the right at 90, flip,
move down on the right how you like, duplicate, mirror.
Duplicate a couple more times, moving below the paper layer of the
frame on each side and placing how you like.

Resize element 45 to 15%, place on the left below the flowers, duplicate,
mirror, duplicate again and move up some on the right.
 Duplicate, flip, move down below the tube layer at the bottom,
duplicate and move over.

Resize element 61 to 15%, place on the right, duplicate and move to the left,
making it look like the dove is trying to put it's beak in it.

Resize element 85 to 20%, place on the left side.

Resize element 31 to 20%, place on the left below the flowers, duplicate,
move over by the elbow of the tube.

Resize element 46 to 20%, move below the paper layer of the frame and
to the bottom.

Resize element 55 to 10%, place on the chair.
Resize element 75 to 15%, place one on each side just above the grass
layer or how you like.

Once happy, close off your background if you used one, merge visible
 and apply the
Xero filter, Porcelain, then Mistifier and then Clarity.

Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU Splash Palette

FTU Clusters using PTU **Splash Palette**

by BLT DeZignz

This kit is Beautiful, you will love the colors and tagging with this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

Sweet Candy Fairy

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Fania-Love.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Dulce Tentacion by Bel Scrap  HERE
RR Mask 2_2-1 HERE
Filters
Font of Choice, I used Firepower BB

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 2, resize to 25%, apply your mask, delete and merge group.

Resize M5 to 30%, free rotate to the left at 20, move off center a bit.
Go to Adjust, Hue and Saturation, Colorize and change the color with these
numbers
H 226,  S 96
Click inside with your magic wand, expand by 5, resize paper 5 to 25% and paste,
select none and move below the frame.

Resize your tube to 65% and paste, if using the same one I am.
Resize element Cojin to 25%, place under your tube, duplicate and move over some.
Resize element D4 to 25%, paste above the pillow layers at the bottom, duplicate,
move below the pillow layers and up a bit.

Resize element caramelo to 10%, paste under the hand of the tube.

Resize element Cinta to 20%, paste below the pillows on the left,
duplicate, mirror, adjust.

Resize element D8 to 10%, duplicate and place on the left side,
above the tube layer.

Resize the Chocolate bar to 10%, place on the right side.

Resize Caramelo 2 and 9 to 10%, free rotate one at 90 and one at 65
and place on the left side.

Resize Fs1 to 20%, paste below the sucker, below the hand of the tube layer,
duplicate and move over to the right more below the chocolate bar.

Resize dulces  to 25%, mirror, paste just above the frame layer on the right,
duplicate, mirror, adjust and erase the part that is overlapping the top section.

Resize D2 to 10%, place on the right above the tube layer.

Resize Flor3 to 15%, free rotate to the right, place above the frame layer on
the right, duplicate, move down some, erase part of the stem showing,
duplicate again, mirror and move a bit.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Egyptian Queen

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Elias Chatzoudis.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap NEFERTARI'S DREAM by RDH  HERE
RR Mask 32_4  HERE
Filters
Mura Meister Filter-Encircle
Font of Choice, I used Akhenaton

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize frame 2 to 35%, paste, click inside with your magic wand,
expand by 5, resize paper 1 to 22%, paste, invert, delete, select none,
move the paper below the frame layer.

Resize paper 5 to 22%, paste, apply your mask, delete and merge group.
You can resize your mask later to fit your tag better.

Resize element 7 to 40%, paste on the upper left side, above the frame layer.
Duplicate, mirror, resize to 90%, move below the paper layer of the frame,
and adjust to your liking on the right, erasing the truck of the tree at the bottom.
Duplicate, resize to 75%, mirror, flip and adjust at the bottom left side,
duplicate again, mirror and adjust on the right side bottom.

Paste your tube above the frame layer.

Resize element 16 to 20%, free rotate to the left at 90, paste inside the frame
at the bottom, erase the part showing outside the frame, duplicate, flip
and adjust at the top.

Resize element 4 to 20%, apply the Mura Meister Filter-Encircle with
the number at 12, and all others as is, move below all the palm tree layers
and up to the top, duplicate, move down to the bottom and above the
palm tree layers.

Resize element 15 to 10%,  mirror, place on the palm tree,
erasing the tree part of the bird.

Resize element 10 to 30%, paste on the bottom right side.
Resize element 13 to 15%, duplicate and paste one on each side of the frame.
Resize element 4 to 15%, duplicate 3 more times, paste 2 on one side and
the other 2 on the other side, moving 2 below the palm layers on each side.
The other 2 above the frame layer and have the animal sitting on it.
Resize element 5 to 15%, free rotate to the left, move below the
flower the animal is sitting on, adjust to your liking, duplicate, mirror.
Duplicate twice more and place how you like.

Resize element 17 to 20%, place on one side just above the last circle flower above the mask layer, duplicate, mirror, duplicate,
free rotate to the left or right at 90,  place at the top or bottom, duplicate, flip.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU **Bejeweled Frog**

FTU Clusters using PTU **Bejeweled Frog**

by BLT DeZignz

This kit is awesome, you will love tagging with this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

Here are a couple of tags I made with them

 

 

Spring Fairy

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Marta Sarmiento.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Happy Feelings by RDH  HERE
There are 2 parts to this kit
MPM Mask 104  HERE
Scroll down a bit for the mask
Filters
Mura Meister Filter-Encircle
Xero Filter-Porcelain and Clarity
Font of Choice, I used Mf Queen Leela

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 7, resize to 22%, apply your mask, delete and merge group.

Resize element 10 to 25%, apply the Mura Meister Filter-Encircle.

Paste frame 1, resize to 35%, click inside with your magic wand,
expand by 5, resize paper 7 to 20%,  paste, invert, delete, select
none, move below the frame layer.
Apply the Xero Filter-Soft Vignette to the paper, change the
Pattern type to Vertical Lines and the repeat to 1

Paste your tube, resize to 75%, if using the same one,
move below the frame, duplicate, move above the frame and erase the parts
you do not want over the frame and then erase the parts on the bottom tube.
Apply the Xero Filter-Porcelain to both tubes, then the filter Clarity.

Resize element 20 to 20%, paste on the left side.

Resize element 10 to 20%, place at the bottom of the frame
below the statue, duplicate, mirror.

Resize element 19 to 20%, paste above the mask layer on the right bottom,
duplicate, mirror, duplicate, move up toward the top,
duplicate again and mirror.

Resize element 13 to 10%,  free rotate to the left at 20 degrees,
place where you like.
Resize the original to 5% and , same free rotate and place where you like, duplicate
a time or two and move around.

Resize element 2 to 40%, paste at the upper left just below the mask layer.
Then back on the original resize it to 15%, place on the left,
below the statue. Duplicate, free rotate to the left and move down,
erase the stem part that is showing, duplicate, mirror.
Resize element 18 to 20%, mirror and place below the flower
on the right side.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Beauty in Blue

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Veronica Nuñez.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap A Very Blue Valentine (Heart's On Ice Blog Train)
by Heather's Devine Dezigns HERE
Check out her Blog HERE
Trese Mask 0113  HERE
You will have to add this one to your mask folder
Font of Choice, I used Magnolia Light

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 7, resize to 97%, apply your mask, delete and merge group.

Paste element 20, resize to 95%., click inside with your magic wand,
expand by 5, paste paper 2, invert, delete, move below the frame, select none.

Paste your tube on top of the frame, resize to 80% and move slightly off center.

Paste element 39 on the left below the tube layer.

Paste element 6, below the paper layer and move up how you like, duplicate,
flip, mirror and adjust.

Resize element 9 to 70%, paste just above the frame layer on the bottom,
duplicate, resize to 70% again and move up on the right side a bit,
duplicate, mirror.

Resize element 21 to 35%, place on the left side, being on the top layer.

Resize element 4 to 30%, paste on the right, below the tube layer,
duplicate, mirror and move above the frame layer and adjust.

Resize element 53 to 75%, mirror and paste on the left and down,
being above the leaf layer, and move to your liking, duplicate,
mirror and adjust again.

Resize element 31 to 25%, free rotate to the left at 45 degrees and place
below the candle layer on the left.

Resize element 51 to 80%, paste on the right side, just above the frame layer
and move up a bit.
Paste element 18 at the bottom above the frame layer.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters From the Vine

FTU Clusters using PTU **From the Vine**

by BLT DeZignz

This kit is awesome, you will love tagging with this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with the Clusters

 

 

 

Honey Sweet

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Laguna.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art PFD  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap-American Honey by Horseplay's Pasture Design  HERE
RR Mask 2_2-1 HERE
Xero Filter-Soft Mood
Font of Choice, I used Babes In Toyland

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 14 or one you like, apply your mask, delete and merge group.
Paste AH79 on the mask layer.

Paste AH8, resize to 90%, apply the Xero Filter-Soft Mood.
Paste AH27, resize to 97%, and place on top of the wheel, apply
Xero Filter-Soft Mood.

Paste AH50, move over a bit, duplicate, mirror.
Paste AH80 in the center.

Paste AH53 below the wheel layer, erase the parts showing behind
the wheel, duplicate, mirror.

Resize AH67, mirror and place on the left side by the bench leg.

If using the same tube, resize to 25%, paste toward the right more,
add the flower the bear is holding and the barrel.
Change the color of the clothing to what you like, then
paste the girl on the bench to the left.

Paste AH70 below the grass layer, duplicate and place how you like.
Paste AH11 on the right, duplicate, mirror.

Resize AH2 to 15%, duplicate a few times and place in different areas.

Paste AH69 on the wheel layer at the top left side, erase the part showing
inside the wheel area, duplicate, mirror and erase any other part
that needs it.
Resize AH49 to 75%, paste below the grass layers, duplicate, mirror.

Paste AH48, duplicate a couple of times and place where you like, moving a
couple of them above the bench layer.

Resize AH63 to 50%, place on the right below the bear layer.

Resize AH7 to 20%, place on the bench below the girl layer, duplicate,
move down by the basket.

Resize AH51 to 40%, place on the bench on the right side.
Resize AH77 to 40%, place in front of the pots on the bench, duplicate
a couple of times, mirror one and place the other how you like.

Paste AH62 on the left above the frame layer and adjust.
Paste AH75 on the right side above the frame layer.

Resize AH1 to 20%, place where you like.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.

Resize first, then add copyright and name.
That's it

Hope you enjoyed doing my tut.

Just Another Cowgirl



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Cris DeLara.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at The Psp Project-TPP  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap-Yee Haw Baby by Wicked Princess Scraps HERE
Check out her Blog HERE
WSL Mask_223 HERE
Font of Choice, I used Angel Warriors

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 5, apply your mask, delete and merge group.
Enlarge your mask to 145 or however you like your mask to show.

Paste the wheel, resize to 90%, duplicate, resize to 50%, place on
the left side.
Resize the barrel to 45%, place below the small wheel layer.

Paste cactus 1 on one side below the wheel layer, duplicate, mirror.
Once everything is in place then adjust them how you like.

Paste the wagon, resize to 65%, move below the large wheel on the right.
Paste the sign on the left below the wheel, resize to 75%, free rotate to
the left at 15 degrees.
Resize the grass to 67%, place at the bottom on the top layer.
Resize the Painted flowers to 55%, paste below the grass layer on
the left, duplicate, mirror.
Paste the animal skull, resize to 35%, free rotate to the left at 20 degrees,
place on the right just below the grass layer.

Paste the bench on the left side above the grass, resize to 40%.

Paste the bucket and resize to 30%, place by the skull.

Resize the bag to 55%, place in front of the bench.
Resize the rope to 15%, place under the bag and over a bit.

Resize the Boot 1 to 25%, place on the left above the bag layer, duplicate,
free rotate to the right at 35 degree, move below the first boot.

Resize spurs2 to 40%, place where you like them.
Resize the canteen to 40%, place like it is hanging on the bolt on
the large wheel, moving it above the smaller wheel.

Resize the plant to 25%, duplicate at many times as you like and
play around with them and place in different areas, moving some
below the bench layer.

Resize your tube layer to 90%, place below the grass layer.

Resize the bird to 25%, place on the wagon.
Resize the butterfly to 10%, place by the wagon on the right, duplicate,
mirror and place on the left where you like.

Resize the sun to 35%, place at the top below the cactus layers.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.

Resize first, then add copyright and name.
If you want to add some wording to the sign, now is the
time to add whatever saying you would like and rotate
the words to fit the sign.
I also resized a horse to 10% for the top of the sign and one at 5% to place
on the blank board.

That's it

Hope you enjoyed doing my tut.

Froggy Love

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art in the Exclusive Section at 
the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

This is part of a Blog Train
Toadally Spring by Wicked Princess Scraps HERE
RR Mask_2-1 HERE
Xero Filter-Soft Vignette, Clarity
Font of Choice, I used One Starry Night

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
New layer and fill with white.

Paste paper 8, apply your mask, delete and merge group.

Resize Birdhouse1 to 80%, and paste in the center.
Paste Fence1 behind the house and resize to 70% and move down, erase
the part showing in the window.

Resize Grass3 to 90%, place above the house layer on one side,
duplicate, mirror, moving them both to the edge of the
bottom part of the fence.
Paste the other Grass below the fence layer, erase the edges on each side.

Resize the mushroom to 15%, duplicate a couple of times and place where you like, just above the house layer.

Resize Frog 2 to 25%, mirror and place where you like, duplicate,
resize to 45% and move over some.

Resize Bird1 to 20%, place on the mushroom or where you like,
duplicate, mirror and place on the fence or where you like.

Resize Flower1 to 30%, paste on one side below the mushroom layers,
duplicate and adjust the way you like them.

Being on the top layer, paste your tube on the left side.

Resize either sunshine that you like to 40%, paste on the upper right side.

Paste the Wisp just above the mask layer on one side, duplicate, mirror,
erase any part showing in the window.

Resize the butterfly 2 to 10%, duplicate as many times as you like and
place in different areas on your tag.

Resize Cloud1 to 70%, paste below the wisp layers at the top.

Resize the lady Frog to 35%, place below the house layer and have
her looking thru the window.
If you are not going to animate, then place how you want her looking
thru the window, then close off the white background and merge visible.
Resize and add copyright and name.

If going to animate then do not close off the white background and
do not merge.
Add your copyright and name first.

Move the lady frog down to where just her eyes are
starting to peek over the window, copy merged to
animation shop, go back to psp and move the lady frog up a bit and
copy merge and paste after current frame in animation.
Go back to psp again and move the frog up a bit more again,
copy merged, paste after current frame again in animation.
Do this one more time and take to animation again, you should
have 4 frames now.
Click on the first frame, go to edit, select all, then Animation,
frame properties and change the number to 50, then click on the last frame,
change the animation number to 70.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU Garden Sanctuary

FTU Clusters using PTU **Garden Sanctuary**

by BLT DeZignz

This kit is wonderful for your Spring, garden like
tagging needs. You will love this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with the Clusters

 

 

Toxic Babe

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Celinart.
The tube is called Poison.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at their Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
KittzKreationz Blog HERE
you can find the kit
Scrap Toxic City by kittzkreationz  HERE

RR Mask_2-1  HERE

Xero Filter-Soft Mood and Clarity
Font of Choice,

I used Stylin' BRKDrop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 4, apply your mask, delete, merge group, duplicate,
mirror and erase the part on the left to let the lightening show.

Paste element 10, apply the same mask you used before, delete, merge group,
duplicate and move up more.

Paste element 42, free rotate to the left at 20 degrees and move to
the upper left.
Click inside with your magic wand, expand by 3, paste your tube,
invert, delete, select none.
Change the blend mode to overlay or one you prefer, and
move below the building layers.
Apply the Xero Filter-Soft Mood, then Clarity.

Resize your tube to 65%, being on the top layer and paste.
Paste element 11 on the upper right below the tube layer.

Resize element 40 to 75%, duplicate twice more and place 2 on
the left side and one on the right side.
Resize element 32 to 75%, place on the right below the barrel layer.

Resize element 44 to 75%, place at the bottom above your tube layer.

Resize element 33 to 50%, place on the right below the wordart,
duplicate, mirror and adjust.

Resize element 5 to 50%, mirror and place on the barrel on the left.

Resize element 46 to 40%, mirror and place on the right side,
above the wordart layer.
Resize element 34 to 25%, place by element 46.
Resize element 45 to 40%, place on the left side, duplicate, resize
to 70%, and move over some.

Resize element 13 to 50%, place on the left below your tube layer,
duplicate, mirror.

Resize element 24 to 25%, place on the left above the skull layer.
Paste element 4 above the wordart layer at the bottom and erase parts
on the end you do not want showing.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU Carmens Paradise

FTU Clusters using PTU **Carmens Paradise**

by BLT DeZignz

This kit is beautiful, you will love the colors and
tagging with this kit

You can purchase this kit HERE or HERE

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with the Clusters

 

 

FTU Clusters using PTU Yesterdays Wardrobe

FTU Clusters using PTU **Yesterdays Wardrobe**

by BLT DeZignz

This kit is beautiful, you will love the colors and
tagging with this kit

You can purchase this kit HERE

 

Just click to enlarge and right click and save

Here are  a couple of tag I made with the Clusters

 

 

FTU Clusters using PTU **Secret Garden**

FTU Clusters using PTU **Secret Garden**

by BLT DeZignz

This kit is beautiful, you will love the colors and
tagging with this kit

You can purchase this kit HERE

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with the Clusters

 

 

Some Bunny Loves You



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Floppy Ears and Fluffy Rears by HPD HERE
MC Mask 10 HERE
Xero Filter-Soft Vignette, Clarity
Font of Choice, I used Billy Argel Font

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste paper 13, apply your mask, delete and merge, enlarge up
to 130, unless starting with a smaller new image then resize as needed.

Paste element 14, click inside with your magic wand, expand by 5,
paste paper 9, invert, delete, move below the frame, do not deselect yet,
paste your close up, move where you like, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, with the number on 5,
change the blend mode to screen or one you prefer, merge down.
Apply the Xero Filter-Soft Vignette
Elliptical
Background color
Vertical lines
1, 0, 0, 255

Resize your tube to 75%, if using the same one, place on the left side.

Resize element 66 to 70%, place inside the frame above your
close up tube, then take your pick tool and adjust inside the frame.
Then apply the Xero Filter-Clarity to the wordart.

Paste element 19, place below your tube layer, duplicate and move
over more.
Paste element 68 above the grass layer, move to one side,
duplicate, mirror.
Paste element 67 in the center under element 68.

Resize element 23 to 50%, mirror, place below your tube layer,
duplicate, move above the tube layer, erase the back end of the rabbit.

Resize element 24 to 65%, place on the right side.

Resize element 61 to 75%, paste on the right, above the wordart layer,
duplicate, mirror, adjust and erase any of the stem showing
at the bottom.

Resize element 56 to 45%, place on the right above the grass layer,
duplicate, mirror, adjust behind your tube.

Resize element 15 and 17 to 20%, place by the leg of your tube, below the rabbit.
Free rotate either one to 90 degrees to the right.
Duplicate both and move to the below the scatters layers and place
how you like them.

Resize element 47 to 30%, duplicate once or twice and place how you like.

Paste element 69 and 71 just above the mask layer, arrange them
how you like and erase the parts you do not want showing.
This is where you just play around with these to get the look you want.
Duplicate as many times as you need.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Bunny Girl

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Eggs-ellent Spring Collab Scrap Kit by Gold Dust  HERE
(No longer Available) Easter Template by Fired By Flamin  HERE
Trese Mask 0113 HERE
Look on the left for the list of numbers for the masks.
Xero Filter-Soft Vignette
Font of Choice, I used Andes

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your Template, hold the shift key and hit the letter d
to duplicate, close the original, delete the credits.

Paste paper 4, apply your mask, delete and merge group,
move below all the template layers.

Merge the 2 green squares together, select, float, defloat,
paste paper 2, invert, delete, select none.
Delete the template layer also.

Select the Blue Oval, paste paper 9, invert, delete.
Select the Blue Oval border, go to Adjust, Hue and Saturation,
colorize, change the numbers to
Hue 226, Saturation 128
Apply an inner bevel to the frame with these settings,
Bevel shape 2,
8, 2, 4, 0
48, 36, 42
color white
Paste frame 9, free rotate to the left at 90,
resize to 68%, paste below the blue oval.

Yellow rectangle, leave as is or paste a paper of choice.

Merge the 3 Pink rectangles together, select all, float, defloat,
paste your medium size tube on the left pink rectangle, invert, delete,
select none, erase any part from the first tube showing in the center rectangle, duplicate, mirror and place on the right side rectangle, merge down.

Duplicate the tubes, go to Adjust, Blur, Guassian blur at 4,
change the blend mode to screen.

Apply the Xero filter, Soft Vignette, change the pattern shape to
Diagonal Dots, repeats 1, leave all else as is.

Paste your tube and move toward the bottom, paste grass 1 below
your tube layer, erase the blunt edges on each side of the tube.

Position the wordart how you like, I placed mine just under the tube layer.
Add the Hue and Saturation as before to change the color of the wordart.
Add a white fat gradient to the wordart.

Paste the fence cluster below the 3 Pink rectangles.

Resize the birdhouse 1 to 45%, place in the center pink rectangle below
the grass layer.

Resize basket 2 to 45%, paste below the tube layer on the right.

Resize eggs 1 to 30%, place on the left below the tube layer.

Resize chick 2 to 30%, place on the left in front of the tube.

Resize flower 8 to 30%, place on the left below the egg layer, duplicate,
move below the grass layer and place how you like.

Paste the sparkles on top of your tube layer.

Resize butterfly 1 to 30%, place at top left, duplicate, place on the left by the flowers, duplicate, mirror  and place where you like.

Resize the sun to 45%, place at the top left side.
Add any other elements you would like, make it your own.

Resize the swirly plant to 50%, place on the left below the yellow
rectangle and up some, duplicate, mirror and adjust.

Resize scatter 2 to 80%, paste just above the mask layer on one side,
duplicate, mirror.

Resize egg pops to 20$, place between the wordart words and above
the tube layer.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.