Sweet Ice Cream Indulgence

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Ice Cream Happiness by Digicats (and Dogs)  HERE
Template 2 by Gimptastic HERE

RR Mask Set 2_1   HERE
Filters
Two Moon-Warm Cloth
PhotoEffex-Scanlines
Xero-Porcelain
EyeCandy 4000-Gradient Glow
 

Font of Choice, I used Coolock Black

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift and the d to duplicate, close the original.
Go to Adjust, canvas size, 800 x 800 or a size you prefer.
Delete layers 1, 2, 3 and 4.

Paste paper 5, apply your mask, delete and merge group.

Paste your middle size tube, on one side, duplicate mirror, adjust to
your liking, then merge these 2 tubes together, change the blend mode to overlay.
Now being on your mask layer, select all, float, defloat, invert, click on
the tube layer and delete, select none.
Be sure to crop your tag when done.

Resize ice cream cone 3 to 65%, free rotate to the left at 20, paste on the left where the template of the ice cream was, duplicate mirror,
resize to 50%m paste where the smaller ice cream was.
 Delete both the template cones and ice cream parts.

Resize your tube to 70%, paste in the center.

Select layer 19, float, defloat, paste paper 10, invert, delete, paste your tube,
place how you like, delete, select none.
Apply the Xero filter-Porcelain.

Select the paper layer, float, defloat,  Modify, select selection borders
with the number on 3, add a new raster layer and fill with white or
a color you prefer, select none.
Add noise at 50%, be sure your tube is below this frame layer.

Select layer 12, paste paper 12, invert, delete, select none.

Select layer 11, paste paper 1, invert, delete.

Select layer 9, apply Two Moon-Warm Cloth with these settings
40, 59, 19, 147, 8, 0, 0, 0
or play around with the settings and get what you like.
Leave layer 8 the color it is, apply PhotoEffex-Scanlines, width 1, spacing 2,
 noise at 50.

Select layer 6, paste paper 2, invert, delete.
Select layer 5, add a new raster layer, fill with a color of choice, I used #ce6aa5,
go to Effects, Texture Effects, Weave with these numbers
1, 10, 1 and both colors on white, fill gap checked.

Resize ice cream bar 3 to 35%, free rotate to the left at 20, paste on the left side,
duplicate, mirror.
Resize the fudgecicle to 30%, free rotate to the left at 45, place on the left,
duplicate, mirror.
Paste the wordart Indulgence above the tube layer, at the bottom by her legs,  then take your target brush and change the color to  #78305b, then adjust the ice cream bars on each side.
Resize the wordart Sweet to 50%, place at the upper right side and add a
fat gradient in white to both wordarts.

Resize the glitter spill to 80%, paste on the top layer, sharpen once.
Resize the baby imp to 30% place on the right side, below the ice cream cone.

Add any other elements you would like, make it your own.

On the name I added a bevel using EyeCandy 4000, you will just have to play around and get what you like for your name.
Mine was set on Bevel width 1000,  Height 100,  Smoothness 75,

Crop your tag to be sure no stray shadows are on the edges of your tag.
 

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Chocolate with Friends

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Joanna Bromley.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Menthe Chocolat HERE
RR Mask Set 2_1   HERE
MPM Mask 54 HERE

Font of Choice, I used Puppy Pooky

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Resize paper 3 to 22% paste,  RR Mask 2-1, delete and merge group.
Resize paper 5 to 22%, paste  MPM Mask 54, delete and merge group.
Take your magic wand, click on each of the peach color lines of the paper,
add noise at 50%, select none.

Resize element 22 to 35%, paste, free rotate to the left at 90.

Click inside with magic wand expand by 5, resize paper 3 to 20%, paste invert delete.
Duplicate the frame, on the bottom one rotate to the right at 15.

Resize element 35 to 30% paste on paper in frame, duplicate move below the frames,
place at the upper left, duplicate, flip and mirror to the bottom right side.

Resize your tube to 70%, place at the bottom part of the frames.

Resize element 36 to 50%, place on the upper left of the frame.

Resize element 2 to 15%, place on the left below the tube layer, duplicate, resize to 70%, move below the first one and out to the left some.

Resize element 11 to 15%, place on the left above the tube layer.

Resize element 27 to 25%, place on the heart locket, duplicate, mirror, move down just a bit.

Resize element 17 to 20%, paste below the chocolate layers on the left, move up a
bit, duplicate, mirror, duplicate as many times as you like and place under
your tube layer at the bottom in different areas.

Resize element 26 to 80%, place at the bottom under your tube layer.

Resize element 25 to 15%, place on the upper right area, duplicate, mirror, place
where you like, duplicate one again, resize to 50%, place at the upper right side again.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Treasures of a Pirate

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  OrkusArt.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the PFD Store  HERE

This is an Exclusive at PFD

Supplies Needed

I used PSPX...but any of them should work.
Scrap A Pirate Lady by Jenny's Designz  HERE

RR Mask Set 2_1   HERE

Font of Choice, I used Pieces of Eight

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 10, apply your mask, delete and merge group.

 

Paste frame 2, duplicate, change the blend mode to burn, merge down.

 

Paste the Palm tree on the right above the frame, free rotate 20 to the right.

Paste the Palm tree again, this time below the frame on the left, duplicate,

move down some and erase the trunk showing below the frame,
duplicate this one and mirror.

 

Being back on the top layer, paste your tube, mirror, resize to 50%, place

how you like, duplicate, Gaussian blur at 4, change the blend mode to

overlay or one you prefer, merge down.

 

Paste the sand, duplicate, move over some, merge down and move below the tube layer.

 

Paste the barrels on the left below the tube layer.

Paste chest 1, mirror, resize to 70%, place on the right side below the tube layer.

 

Paste the coins on the right below the tube layer.

Paste the grass on the right above the chest layer and adjust, duplicate, resize

to 70%, move to the left below the barrels.

 

Resize the ledger and paste in front of the barrels on the left.

 

Paste the rock above the sand on the right, duplicate mirror, duplicate again and

move below the frame and off center a bit.

 

Back on the top layer, paste the money cup on the left by the ledger.

Resize the plates to 65%, place by the money cup.

 

Resize bottle 2 to 70%, place on the right side.

 

Paste flower 5 on the left side below the grass and barrel layers, duplicate,

resize to 75%, duplicate as many times as you like and place in

different places on your tag. Take one and free rotate at 90 to the

right and place by the chest on the right, duplicate twice and mirror one

and move below the ledger on the left.

 

Resize bird 2 to 50%, place on the chest, duplicate, mirror and move up

on the frame on the left.

 

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU Look At Us

FTU Clusters using PTU **Look At Us**

by BLT DeZignz

This kit is Beautiful, you will want this kit to tag with for
your weddingtags, love, or just a beautiful tag.

You can purchase this kit at PFD  HERE 

 

Just click to enlarge and right click and save

 

 

Here are a couple of tags I made with the clusters

 

 

 

Egyptian Princess

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  OrkusArt.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at the PFD Store  HERE

This is an Exclusive at PFD

Supplies Needed

I used PSPX...but any of them should work.

 Scrap NEFERTARI'S DREAM by RDH  HERE
RR Mask 32_4  HERE
Filters

VM Extravaganza-Transmission

Xero-Mistifier

Font of Choice, I used Akhenaton

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

 

Resize paper 7 to 22%, paste and apply your mask, delete and merge group.

Resize your mask to fit your tag later.

 

Resize frame 2 to 25%, paste, duplicate, resize to 75%, move down

to the right more. Back on the first frame, free rotate to the left at 5 degrees.

 

Paste your tube, resize to 50%, paste how you like, then adjust the frames

how you like, close off your tube and merge the frames together, then reopen your tube layer.

 

Click inside the frames, expand by 5, resize paper 7 to 22%, paste below the frame layer, invert, delete, paste your close up tube,  I mirrored mine first,  then adjust how you like it, delete, select none.

Apply the Xero Filter-Mistifier with these settings

140, 135, 255, 255, 255,

then

Apply the VM Extravaganza Filter-Transmission with these settings

25, 0, 14

 

Resize element 7 to 37%, mirror, paste behind your tube layer on the right,

duplicate, mirror, move below the paper layer on the left, erase the truck

part that is showing below.

 

Resize element 4 to 25%, place below the tube layer by her feet, duplicate and

resize to 80%, move to one side, duplicate and mirror, duplicate and resize

again to 80%, move to outside edge on one side, duplicate, mirror.

 

Resize element 3 to 20%, paste below the yellow flowers on one side,

duplicate, mirror. Duplicate and resize to 50%, move above the larger

yellow flower, duplicate and move over some.

 

Resize element 8 to 30%, move below the flowers on one side, erase the stem showing below, duplicate, mirror. Duplicate and resize to 50%, place where you like, duplicate again and move over some.

 

Resize element 11 to 23%, paste below the yellow flowers on the left.

 

Resize element 5 to 20%, free rotate to the left at 90, move below the statue layers, duplicate several time,

mirror a couple of them also and place how you like them.

 

Resize element 4 to 50%, place just above the mask layer on the

upper left side, duplicate and move over to the right and down some.

 

Resize element 17 to 25%, free rotate to the left, place at the bottom,

move below some of the yellow flower layers.

 

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.

Crop your tag to be sure no stray edges are on your tag.

Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Summer Sunset

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE
 

Supplies Needed

I used PSPX...but any of them should work.

Scrap Summer Sunset by Gimptastic  HERE
RR Mask Set 2-1 HERE
Filters
Xero Filter-Mistifier
EyeCandy 4000-Gradient Glow
Font of Choice, I used Siti Maesaroh

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 2, apply your mask, delete and merge group, then
paste paper 1, apply the mask again, delete and merge group.
Resize the bottom mask larger so it shows behind the other mask.

Paste frame 4, click inside with your magic wand, expand by 5, paste
paper 5, invert, delete, move below the frame layer, then
paste your close up tube, delete, select none.

Duplicate your close up, go to Adjust, Blur, Gaussian blur at 5,
change the blend mode to screen or one you prefer, merge down.
Apply the Xero filter-Mistifier
Haziness 145,  Strength 140,
all other numbers left at 255

Paste WA 1 at the top on the frame, apply a fat gradient glow, using
EyeCandy 4000 and the color #ebff64, width set at 3.

Paste the sand at the bottom, duplicate, mirror and adjust.

Paste the grass on one side, duplicate, mirror, duplicate again and move up
more to the wordart, duplicate, mirror.
Duplicate the grass again, resize to 50%, place in the center more,
duplicate and move over a bit.

Paste the vase on one side, resize to 80%, duplicate and mirror.

Paste the Sphinx on the right side, resize to 50%, then go to
Adjust, Hue and Saturation, colorize and place both numbers on 0.
Duplicate, change the blend mode to hard light and merge down.

Paste your tube on the left side.

Resize the coin to 50%, duplicate as many times as you like and place
where you like on the sand.

Paste the bronze below the paper layer of the frame on one side,
duplicate, mirror, adjust them to your liking.

Paste the bead below the coin layers, duplicate, resize to 50%, move above the coin layers, duplicate a couple more times and place how you like.

Paste the scatter on top of the mask layer, duplicate, mirror.

Resize the moon to 50%, paste below the wordart at the top in the center.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

The Look

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Verymany Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Golden Moments by Gimptastic  HERE
Be sure to check out the rest of the blog HERE
Tres Mask 0113  HERE
You will have to add this one to your mask folder

Filters
Xero-Soft Vignette
Mura Meister Copies-Encircle

Font of Choice, I used Brotherhood Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 1,  resize larger to 125%, apply your mask, delete and merge group.

Paste frame 2, click inside with your magic wand, expand by 5, paste your close up, invert, delete, select none.  Sharpen the frame once.

Duplicate your tube, go to Adjust, Blur, Gaussian blur at 4, change the
blend mode to soft light or one you prefer, then merge down.
Apply the Xero Filter, Soft Vignette with these settings
Ellipitcal, Foreground color,
Diagonal Dots,
1, 0, 0, 255

Resize your tube to 55%, paste on the right side above the frame layer.

Paste feather 2, resize to 65%, apply Mura Meister Filter, Copies-Encircle,
change the amount to 20 and leave all other numbers as is,
move below the tube layer in the frame.

Paste deco 4, resize to 55%, apply the Mura Meister Filter again,
with the same settings, move below the feather layer, change
the color by going to Adjust, Hue and Saturation, Colorize with
these numbers
Hue 255,  Saturation 182

Paste flower 1, resize to 75%, place above the top tube layer in the center,
duplicate, resize to 85%, move to one side, duplicate, mirror.

Paste the bottle on the left side below the flower layer.

Paste the deco 1 below the flower layers, duplicate, mirror.

Resize the heel to 55%, place on the top layer on the left side,
duplicate, mirror and move back  over to the left.

Paste the hat, resize to 65%, mirror and place on the right side,
above the flower layers.
Paste the phone, mirror, resize to 65%, place above the hat layer
on the right.

Resize the box to 40%, place on the left below the shoes.

Paste the gold wing on the right just above the frame layer and
move out behind the tube layer, duplicate, mirror, adjust,
erase any part above the flowers you do not want showing.

Paste feather 1 just above the gold wing on the left, free rotate to the left
at 15 and place how you like it.

Paste the sash below the flower layers and up just a bit to let some of
the gold show above them, duplicate, move down so a little bit is showing
at the bottom, erase some of the ribbon part, duplicate again, move over
some and erase the ribbon part again.

Add any other elements that you would like.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU Thanks Dad

FTU Clusters using PTU **Thanks Dad**

by BLT DeZignz

This kit is Awesome, you will love tagging with this kit for
all your Father's Day tags and more.

You can purchase this kit at PFD  HERE 

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

Flower Fairy

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Sarah Pauline.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Fairy Garden by Gimptastic  HERE
Be sure to check out the rest of the blog HERE
WSL_Mask 116  HERE
20/20 Mask HERE

Filters
Xero-Soft Mood and Clarity

Font of Choice, I used Brotherhood Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 2, apply your mask, delete and merge group.

Paste frame 2, click inside with your magic wand, expand by 5, paste paper 4,
invert, delete, select none.

Duplicate the frame and paper, free rotate to the left by 15, click inside
the rotated frame, expand by 5, paste your tube on one side,
 mirror your tube and
paste on the other side and move down some, invert and hit delete for each tube,
select none, change the blend mode for the 2 tubes in the frame to overlay.

Paste the rainbow on the frame layer and adjust.

Paste grass 2 at the bottom of the frame, apply the 20/20 mask, delete, merge group, duplicate the grass layer, adjust to your liking.

Resize your tube to 75%, place in the center, apply the Xero filter-Soft Mood
and then Clarity.

Resize leaf 2 to 50%, paste on one side at the bottom, duplicate, mirror.

Resize flower 2 to 75%, paste below the leaf layer on the left, duplicate, mirror,
move above the grass layer.

 Paste grass 1 on one side, duplicate, mirror.
Paste branch 1 on the right, erase any of the stem showing below, duplicate
and move over to the left, duplicate and move down some, erasing any of
the stem showing again.
Duplicate this one, mirror and adjust.

Resize the frog to 60%, place on the left side.

Resize the butterfly to 45%, duplicate a couple of times, placing them
where you like, mirror one or how many you like.

Paste the cloud below the tube layer at the top.

Resize flower 5 to 45%, place where you like below the other flower layers,
duplicate a couple of times.

Resize the boxes to 45%, place on the right below the flowers.

Resize the watering can to 60%, place below the tube toward the left.

Paste the scatters below the watering can, duplicate, mirror, move below the boxes, duplicate again, flip and place how you like, erasing any parts you do not want showing. Duplicate one more time, mirror, move down to just
above the mask layer for the one on the left.

Resize leaf 1 to 20%, duplicate a few times and place on the grass how you like
them laying.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Yo Ho Ho Pirate Babe

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of A.V. Phibes.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Yo Yo Ho by Manipulated By Magik  HERE
RR Mask Set 2_1  HERE

Font of Choice, I used Pieces of Eight

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 9, apply your mask, delete and merge group.

Paste frame 1, resize to 80%, click inside with your magic wand,
expand by 5, paste paper 3, invert, delete,
select none and move below the frame.

Resize your tube to 80%, mirror and place on the blade of the frame.

Paste the sand below the frame layer, move over a bit, duplicate
and move to the other side a bit.

Paste the cask, resize to 65% and place on the left side under your tube layer.

Resize the starfish to 90%, place below the tube layer where you like.

Resize the hat to 65%,  place on the right side on the sand.
Resize the crates to 70%, place on the left below the rum barrel.
Resize the bottle to 40%, place by the hat below the tube.
Resize the crab to 30%, paste on the left by the barrel.

Mirror the tree, paste on the right side below the hat layer, duplicate,
mirror, resize to 75%, place below the crate layer and adjust
to your liking.

Resize the boat to 55%, paste in the frame and over a bit to the right.

Resize the skull to 25%, paste on the front of the crate.

Resize the map to 50%, free rotate to the right at 45,
place below the hat on the left side by the tree.

Resize jug to 35%, paste by the barrel on the left.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Fairyland Princess

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Queen Uriel aka Carolina Seabra.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Fairy Pool by Irish Princess Designs  HERE
Be sure to check out the rest of her blog HERE
RR Mask Set 2_1  HERE
Be sure to check out the rest of her blog HERE

Font of Choice, I used Billy Argel Font

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

This is an easy peasy one.

Open a new image 800 x 800 or one you prefer.
Resize paper 8 to 80%, apply your mask, delete and merge group.

Paste element 14 and then element 18, moving it over to the left a bit.

Paste element 8, resize to 70%, paste on the right side, duplicate,
mirror, resize again to 70%, place in front of the larger one,
duplicate and mirror again.

Paste element 22 under the mushroom layers, duplicate, mirror and
adjust.

If using the same tube, resize to 90%, paste off center to the right.

Resize element 7 to 35%, paste below the mushroom layers how you like,
duplicate, mirror and adjust.

Resize element 29 to 50%, change the blend mode to overlay and lower
the opacity to about 75%, place just above the mask layer
where you like it.
Paste element 25 above the mask layer and place how you like, duplicate
and move over and down some.

Resize element 30 to 65%, place at the upper left side, being on the top layer.
Select all, float, defloat, expand by 2, add a new raster layer, fill with white,
move below the wordart, then being on the top wordart layer,
merge down.

Resize element 15 to 25%, duplicate a couple of times and place by
the mushrooms how you like, then duplicate a couple more times
and move below the mushroom layers and place at the outside edge
on each side.

Resize element 26 to 25%, place on the left side, between the wordart
and the mushrooms, duplicate and mirror.

Add any other elements you would like, once happy with it all,
close off any background used and merge visible.
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU **Dapple Blossom**

FTU Clusters using PTU **Dapple Blossom**

by BLT DeZignz

This kit is Beautiful, you will love the colors and tagging with this kit.

You can purchase this kit at PFD  HERE 

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

FTU Clusters using PTU Diamonds Are Forever

FTU Clusters using PTU **Diamonds Are Forever**

by BLT DeZignz

This kit is Beautiful, you will love the colors and tagging with this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

 

Couple tags I made with the clusters