I have another freebie Mother's Day wordart for you all in PNG format.
Just right click and save!
Enjoy
Hugs Shaz
Thursday, April 14, 2016
Happy Mother's Day (No Scrap)
I am using the awesome artwork of Anna Liwanag.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO Store HERE
Supplies Needed
Font of Choice, I used Signarita Chloe
Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
*Remember to add your drop shadow as you go along*
Open your template, hold the shift key and hit the letter d to duplicate, close the original, delete the credits.
Go to Image, Canvas size 800 x 800 or a size you prefer.
Being on the bottom layer just above the white background, add a new layer, fill with a gradient you make from two colors from your tube, I used #825880 for the forground color and #d8e9d6 for the background color to make my gradient, set the angle at 45 and repeat at 4, apply your mask, delete and merge group.
Select the bg square, select all, float, defloat, new raster layer, fill with a color from your tube, I used #825880, then go to Selection, Modify, Select Selection Borders, with the number on 3, and both sides checked, add a new layer and fill with white, add noise at 40%, select none.
The circle I left it has the color it was, green.
Select frame bg 2 next, select all, float, defloat, new layer, fill with #ad84a7, or a color of choice from your tube, then go to Selection, Modify, Select Selection Borders, with the number on 3, and both sides checked, add a new layer and fill with white, add noise at 40%, select none.
Frame bg 1 apply Greg Factory Output Vol II-Pool shadow with these settings
93, 50, 50, 50, 50, 50, 128, 128.
Select frame fill, float, defloat, fill with #ad84a7, then paste your close up tube, invert, delete, select none, duplicate, go to Adjust, Gaussian blur, blur, number on 4, change the blend mode to screen.
Apply the Xero filter-Soft Vignette with these settings
Elliptical
Foreground color
Diagonal Mesh
2, 2, 0, 255
merge down.
Frame layer, apply EyeCandy 4000-Chrome with these settings
Outdoor.tif
30, 50, 50, 0, 200
inside marquee checked
Lighting 135, 45
100, 40, 100
Bevel profile on button
Go to Adjust, Hue and Saturation, colorize
Hue 201, Saturation 76
All the other layers of the template I left the colors as is, if you want to change them go for it.
Paste your tube on the left side on the top layer. Take your free hand tool, draw around the legs at the glitter frame and delete.
Paste the wordart at the bottom, apply the same EyeCandy 4000-Chrome as before and change the color as before also, then select the wordart, float, defloat, new layer, fill with white, select none, move below the wordart, add noise at 40% if you like.
This was a no scrap tag, but feel free to add scrap elements if you like,
make the tag your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Mother's Day Wordart
I have a freebie Mother's Day wordart for you all in PNG format.
Just right click and save!
Enjoy
Hugs Shaz
Wednesday, April 13, 2016
Jungle Beauty
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Prihodko.
The tube is called Samanta.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD Store HERE
Supplies Needed
I used PSPX...but any of them should work.
Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
*Remember to add your drop shadow as you go along*
This will take lots of adjusting as you go along to get it the way you want it to look, like a puzzle kind of, so be patience and arrange to your liking as you go along.
This will take lots of adjusting as you go along to get it the way you want it to look, like a puzzle kind of, so be patience and arrange to your liking as you go along.
Open a new image 800 x 800 or one you prefer.
Paste paper 12 first, apply your mask, delete, merge group.
Paste paper 5, apply the same mask again, delete, merge group, resize larger to 105, change the blend mode to screen, merge down.
Paste element 24, duplicate, move behind and to one side and up some, duplicate, mirror, move up just a bit more.
Resize element 12 to 40%, place by the bottom of the building on top.
(This will be like a puzzle)
Now you will duplicate this rock as many times as needed to make your rock floor look like you want it to look, moving them around to fit, some below a layer.
Resize element 10 to 40%, place on the left, move below some of the rock layers to make it look like it is in the rocks, duplicate, move over to the right and move down if needed on that side also.
Paste element 50 just above the top building layer, duplicate, mirror, duplicate, move to the center and up more, your tube will be hiding the bottom part of the tree in the center.
Resize your tube to 40%, place in the center hiding the bottom of the one tree.
Duplicate one tree, resize to 85%, place on the mask layer on the left, adjust all the trees to your liking.
Resize element 1 to 30%, place on the left side, being on the top layer.
Resize element 2 to 45%, mirror, place on the right side by the tree.
Resize element 7 to 20%, place on the rocks by your tube, sharpen once.
Resize element 9 to 25%, place by the crown.
Resize element 39 to 35%, place on the right of the tube on the rocks.
Resize element 27 to 25%, place below the lantern.
Resize element 18 to 40%, paste below the tiger layer on the left, duplicate a couple of times and move where you like.
Erase the branch on element 26 as much as possible, resize to 30%, place in one tree, duplicate, mirror and adjust in the other tree.
Resize element 19 to 50%, place below the tree layer on one side, duplicate, mirror, moving one up a bit higher than the other.
Resize element 23 to 50%, place by the water ponds, you will have to move up or down a few layers, depending on where you want yours at.
Resize element 14 to 15%, place by the lantern or where you like.
Paste element 59 on the mask layer on one side, duplicate, mirror, adjust to your liking.
Resize element 42 to 55%, and then on the original resize to 40%, place the 40% one below the top building on the left, duplicate, mirror, move between the top and bottom building and adjust.
Paste the 55% building below the tree on the left.
Resize element 63 to 35%, place over the water on the left, duplicate, mirror and adjust over the water on the right.
Add any other elements you would like, make it your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Tuesday, April 12, 2016
Tag Show Offs
Here are just a few tags made by my wonderful friend Gail, using my tuts.
She did an awesome job with all of them.
Thank you Gail for all the wonderful tags.
Monday, April 11, 2016
Love of Gold
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Verymany.
The tube is called Helen.
You need a license to use this art work.
Please do not use without a license.
You can find this art HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap I Love Gold by DymunArt Creations HERE
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE
Filters
Xero-Bad Dream
Andrews 17-Dots In The Night
or
(You could use Greg's Factory Output Vol II-Pool Shadow
and play with the settings to get one you like)
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE
Filters
Xero-Bad Dream
Andrews 17-Dots In The Night
or
(You could use Greg's Factory Output Vol II-Pool Shadow
and play with the settings to get one you like)
Font of Choice, I used Brotherhood Script
Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
*Remember to add your drop shadow as you go along*
Open a new image 800 x 800 or one you prefer, paste paper 9, apply your mask, delete, merge group.
Paste element 17, resize to 90%, apply filter, Andrews 17-Dots In The Night with
these settings
6, 6, 14, 25, 13, 101, 130, 163
Click inside with your magic wand, expand by 5, paste paper 11 or one of your choice, invert, delete, mirror your close up tube first, then paste, delete select none.
Apply the Xero filter-Bad Dream with these settings
175, 145, and none checked. Change the blend mode to Screen or one you like.
Paste element 12 at the bottom of the frame, take your Pick tool and holding the shift key down and taking the top corner square and drag straight down on one side and then the other until it is flat, duplicate 3 times and adjust how you like them, moving one below the paper layer of the frame on the left.
Resize your tube to 60%, place on top of the glitter on the left.
Element 11 to 60%, place below the tube layer off center some.
Resize element 32 to 25%, place by the perfume bottles.
Element 6 to 50%, place on the right side above the candles.
Element 5 to 25%, place on the right below the tube layer, duplicate, mirror, move back by the first boot.
Resize element 27 and 1 to 25%, place on the left by the tube.
Resize element 22 to 25%, place by the purse.
Resize element 2 to 25%, place by the legs of the tube at the bottom.
Resize element 15 to 10%, place below the tube layer my her hand on the left, duplicate, take your Pick tool and hold the shift key first and then hold on of the upper squares and drag straight down on one side then the other until it is laying flat, duplicate as many times as you like and place where you like.
Paste element 19 on the left behind the tube, duplicate, mirror, resize to 50%, move to just above the frame layer, duplicate again and move up some, apply the
Andrews 17-Dots In The Night filter to the coins in the back.
Add any other elements you would like, make it your own.
Paste element 17, resize to 90%, apply filter, Andrews 17-Dots In The Night with
these settings
6, 6, 14, 25, 13, 101, 130, 163
Click inside with your magic wand, expand by 5, paste paper 11 or one of your choice, invert, delete, mirror your close up tube first, then paste, delete select none.
Apply the Xero filter-Bad Dream with these settings
175, 145, and none checked. Change the blend mode to Screen or one you like.
Paste element 12 at the bottom of the frame, take your Pick tool and holding the shift key down and taking the top corner square and drag straight down on one side and then the other until it is flat, duplicate 3 times and adjust how you like them, moving one below the paper layer of the frame on the left.
Resize your tube to 60%, place on top of the glitter on the left.
Element 11 to 60%, place below the tube layer off center some.
Resize element 32 to 25%, place by the perfume bottles.
Element 6 to 50%, place on the right side above the candles.
Element 5 to 25%, place on the right below the tube layer, duplicate, mirror, move back by the first boot.
Resize element 27 and 1 to 25%, place on the left by the tube.
Resize element 22 to 25%, place by the purse.
Resize element 2 to 25%, place by the legs of the tube at the bottom.
Resize element 15 to 10%, place below the tube layer my her hand on the left, duplicate, take your Pick tool and hold the shift key first and then hold on of the upper squares and drag straight down on one side then the other until it is laying flat, duplicate as many times as you like and place where you like.
Paste element 19 on the left behind the tube, duplicate, mirror, resize to 50%, move to just above the frame layer, duplicate again and move up some, apply the
Andrews 17-Dots In The Night filter to the coins in the back.
Add any other elements you would like, make it your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Sunday, April 10, 2016
The Artist in You
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey.
The tube is called Artist.
You need a license to use this art work. Please do not use without a license.
You can find this art at his Store HERE
Supplies Needed
I used PSPX...but any of them should work.
Drop Shadow usually V2 H2 50 black
*Remember to add your drop shadow as you go along*
Open a new image 800 x 800 or a size you prefer.
Paste paper 2, apply your mask, delete, merge group, duplicate the mask, flip, mirror.
Go to your preset tool and select the circle, anti alias and create as a vector checked, width on 40, draw out a circle or oval shape on top of the mask layer to a size you like, change to a raster layer.
Go to Selections, select all, new raster layer, paste paper 2, invert, delete, select none. Apply these settings or play around and get one you prefer,
An inner bevel using EyeCandy 4000 with these settings
Width 5.76, Height 50, Smoothness 75
Inside marquee checked
Lighting
87, 65
100, 25
Bevel Profile
Button
Click inside with your magic wand, expand by 5, paste paper 2, invert, delete, then paste your close up, delete, select none, moving both the paper and the tube below the frame and merge the tube now on the paper.
Apply the Xero filter-Artworx with these settings
Fine lines
20, 20, 10, 370
10, 10, 16, 0
220, 255
Paste your tube, mirror and place on the left side above the frame layer.
Resize element 46 to 20%, place on the right side, duplicate, move to the left below the tube layer, adjust.
Resize element 45 to 80%, place on the right in front of the Easel by the legs.
Resize element 47 to 30%, place by the case.
Resize element 42 to 50%, place below the tube on the left side.
Resize element 43 to 50%, place under the tube layer.
Paste your tube on the Easel on the right, take your selection tool, draw around the white of the Easel, invert and being on your tube, delete, select none, change the blend mode to Luminance (L) and lower the opacity to 65, merge down, then apply the Xero filter, Artworx with the same settings as before.
Resize tubes 37 and 38 to 15%, place where you like.
Resize element 48 to 10%, place it on the Easel on the left.
Resize some of the paint elements to 15%, then take your pick tool, holding the shift key, and taking the top square of the pick tool and pull down on each side to make them lay flat and place where you like.
Resize element 3 to 10%, free rotate to the left at 80, place on the left by the paint cans.
Add any other elements you would like, make it your own.
Open a new image 800 x 800 or a size you prefer.
Paste paper 2, apply your mask, delete, merge group, duplicate the mask, flip, mirror.
Go to your preset tool and select the circle, anti alias and create as a vector checked, width on 40, draw out a circle or oval shape on top of the mask layer to a size you like, change to a raster layer.
Go to Selections, select all, new raster layer, paste paper 2, invert, delete, select none. Apply these settings or play around and get one you prefer,
An inner bevel using EyeCandy 4000 with these settings
Width 5.76, Height 50, Smoothness 75
Inside marquee checked
Lighting
87, 65
100, 25
Bevel Profile
Button
Click inside with your magic wand, expand by 5, paste paper 2, invert, delete, then paste your close up, delete, select none, moving both the paper and the tube below the frame and merge the tube now on the paper.
Apply the Xero filter-Artworx with these settings
Fine lines
20, 20, 10, 370
10, 10, 16, 0
220, 255
Paste your tube, mirror and place on the left side above the frame layer.
Resize element 46 to 20%, place on the right side, duplicate, move to the left below the tube layer, adjust.
Resize element 45 to 80%, place on the right in front of the Easel by the legs.
Resize element 47 to 30%, place by the case.
Resize element 42 to 50%, place below the tube on the left side.
Resize element 43 to 50%, place under the tube layer.
Paste your tube on the Easel on the right, take your selection tool, draw around the white of the Easel, invert and being on your tube, delete, select none, change the blend mode to Luminance (L) and lower the opacity to 65, merge down, then apply the Xero filter, Artworx with the same settings as before.
Resize tubes 37 and 38 to 15%, place where you like.
Resize element 48 to 10%, place it on the Easel on the left.
Resize some of the paint elements to 15%, then take your pick tool, holding the shift key, and taking the top square of the pick tool and pull down on each side to make them lay flat and place where you like.
Resize element 3 to 10%, free rotate to the left at 80, place on the left by the paint cans.
Add any other elements you would like, make it your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Saturday, April 9, 2016
Indian Maiden
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Souldesigner.
The tube is called Indian Girl.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD Store HERE
Supplies Needed
I used PSPX...but any of them should work.
Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
*Remember to add your drop shadow as you go along*
Open a new image 800 x 800 or one you prefer.
Resize paper 1 larger to 120%, apply your mask, delete, merge group.
Always adjust your mask to fit your tag when done.
Paste frame 2, click inside with your magic wand, expand by 5, paste paper 8, invert, delete, select none, duplicate the paper, change the blend mode to burn, merge paper layer down with the first paper.
Paste tree 2 on the left, duplicate, mirror, duplicate, move toward the center more, duplicate, mirror, adjust the trees to your liking.
Paste the element tree on the mask layer, duplicate, mirror, adjust.
Resize your tube to 40%, place in the center below the frame, duplicate, move to the top layer, erasing the part at the bottom you do not want showing.
Paste the teepee on the top layer on the left, resize to 90%.
Resize border 1 to 90%, place on the frame at the bottom, duplicate, move to the top on the frame.
Resize the rock to 25%, duplicate a couple of times and place where you like.
Resize the grass to 75%, duplicate a couple of times and place below the rock layer and the teepee layer where you like.
Duplicate one of the rocks and resize smaller to 75%, place by the other rocks as many times as you prefer.
Resize the quiver to 55%, free rotate to the left at 45 degree and place by the rocks on the right.
Resize the hat to 30%, place where you like.
Resize the drum to 45%, place by the quiver.
Resize the drum stick to 45%, place by the drum.
Place flowers 1 and 2 below the rock layers and place them how you like, duplicating once or twice also, erasing any parts you do not want.
Resize the kokopelli to 30%, place on the teepee.
Add any other elements you would like, make it your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Friday, April 8, 2016
Spring Beauty
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Verymany.
The tube is called Laurel.
You need a license to use this art work.
Please do not use without a license.
You can find this art HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Florality by ChiChi Designz HERE
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE
Font of Choice, I used Before the Rain
Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
*Remember to add your drop shadow as you go along*
Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete, merge group.
Resize frame 1 to 90%, paste, click inside with your magic wand, expand by 5, paste paper 12, invert, delete, select none.
Paste frame 2 below the paper layer of the first frame, resize to 90%, duplicate, mirror, move down some on the right.
Paste grass 1 at the bottom on the top frame, duplicate, mirror, adjust.
Paste the fence below the grass layers.
Paste the plant on the left side, resize to 85%, duplicate, mirror.
Resize flower 2 to 75%, place on the right side, duplicate, mirror.
Paste flower 1 on the left, duplicate, mirror.
Resize the flowers to 85%, place on the grass layer in the center.
Resize flower 3 to 80%, free rotate to the left at 30 degrees, paste on the left side, duplicate, mirror.
Resize your tube to 60%, place in the center on the top layer, duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down.
Paste the Swirl sparkles just below the tube layer, duplicate, mirror.
Paste the flower trail on the frame layer, duplicate, mirror.
Resize the bird to 25%, mirror and place at the upper right.
Resize the butterfly to 25%, duplicate, mirror and place them where you prefer.
Duplicate the one on the left, resize to 70%, move up to the top more.
Resize the egg to 25%, place on the left below the tube layer by the leg.
Resize the chick to 25%, place it by the egg, duplicate and move to the right below the tube layer.
Resize the dandelions to 50%, place on the fence layer, on one side, duplicate, mirror, adjust.
Paste the flower brush on the left side below the swirl sparkle layer.
Paste the bubble trail below the tube layer at the bottom, duplicate, flip and adjust at the top.
Add any other elements you would like, make it your own.
Resize frame 1 to 90%, paste, click inside with your magic wand, expand by 5, paste paper 12, invert, delete, select none.
Paste frame 2 below the paper layer of the first frame, resize to 90%, duplicate, mirror, move down some on the right.
Paste grass 1 at the bottom on the top frame, duplicate, mirror, adjust.
Paste the fence below the grass layers.
Paste the plant on the left side, resize to 85%, duplicate, mirror.
Resize flower 2 to 75%, place on the right side, duplicate, mirror.
Paste flower 1 on the left, duplicate, mirror.
Resize the flowers to 85%, place on the grass layer in the center.
Resize flower 3 to 80%, free rotate to the left at 30 degrees, paste on the left side, duplicate, mirror.
Resize your tube to 60%, place in the center on the top layer, duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down.
Paste the Swirl sparkles just below the tube layer, duplicate, mirror.
Paste the flower trail on the frame layer, duplicate, mirror.
Resize the bird to 25%, mirror and place at the upper right.
Resize the butterfly to 25%, duplicate, mirror and place them where you prefer.
Duplicate the one on the left, resize to 70%, move up to the top more.
Resize the egg to 25%, place on the left below the tube layer by the leg.
Resize the chick to 25%, place it by the egg, duplicate and move to the right below the tube layer.
Resize the dandelions to 50%, place on the fence layer, on one side, duplicate, mirror, adjust.
Paste the flower brush on the left side below the swirl sparkle layer.
Paste the bubble trail below the tube layer at the bottom, duplicate, flip and adjust at the top.
Add any other elements you would like, make it your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Wednesday, April 6, 2016
Smile Often
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey.
The tube is called Captivating.
You need a license to use this art work. Please do not use without a license.
You can find this art at his Store HERE
Supplies Needed
I used PSPX...but any of them should work.
Drop Shadow usually V2 H2 50 black
*Remember to add your drop shadow as you go along*
Open a new image 800 x 800 or a size you prefer.
Resize paper pink circle dots to 23%, paste, apply your mask, delete and merge group.
Paste the scalloped frame, resize to 45%, free rotate to the left at 45 degrees,
select all, float, defloat, resize paper watercolor roses to 23%, paste, invert, delete, select none, delete the original frame.
Apply EyeCandy 4000 Bevel Boss with these settings
Bevel width 5.76
Bevel Height 50
Smoothness 75
Inside marquee checked, Shade interior checked also
Lighting
190, 69
Brightness 100, Highlight size 25
Bevel Profile is set on Button, then click ok.
Click inside the frame with your magic wand, expand by 5, resize canvas paper, ligt coral to 23%, paste, invert, delete, mirror your close up tube first, then paste where you like, delete, select none.
Duplicate your close up, go to Adjust, Blur, Gaussian Blur, number on 4, change the blend mode to hard light or one you prefer, merge down.
Paste your medium size tube on the left side on the frame layer.
Resize the flower cluster sticker to 45%, place at the bottom of the frame, above the tube layer, moving to the right a bit.
Resize the rose cluster sticker to 30%, paste on the left side below the first flower layer, duplicate, mirror, adjust.
Resize the flower pot sticker to 50%, mirror, paste on the right side below the flower layers, adjust, duplicate, resize to 70%, mirror, place in front of the first flower pot, duplicate again, move to the left below your tube layer.
Resize the leafy branch to 25%, free rotate to the right at 45 degrees, move below the flower pot layer, and to the right a bit, duplicate, mirror.
Pick the wordart of choice, I used Smile often and resized it to 75%, place at the bottom and apply a fat white gradient glow, using EyeCandy 4000, gradient glow, width at 3.
Resize the light coral butterfly to 30%, place toward the bottom by the flowers, duplicate, mirror.
Resize the little mint butterfly to 15%, duplicate twice, paste where you like.
Resize the light coral large flower to 35%, apply Mura Meister Copies-Encircle with the first number on 12, paste above the mask layer and adjust to fit your tag.
Resize the chipboard border doodle to 75%, place just above the flower circle at the bottom.
Add any other elements you would like, make it your own.
Open a new image 800 x 800 or a size you prefer.
Resize paper pink circle dots to 23%, paste, apply your mask, delete and merge group.
Paste the scalloped frame, resize to 45%, free rotate to the left at 45 degrees,
select all, float, defloat, resize paper watercolor roses to 23%, paste, invert, delete, select none, delete the original frame.
Apply EyeCandy 4000 Bevel Boss with these settings
Bevel width 5.76
Bevel Height 50
Smoothness 75
Inside marquee checked, Shade interior checked also
Lighting
190, 69
Brightness 100, Highlight size 25
Bevel Profile is set on Button, then click ok.
Click inside the frame with your magic wand, expand by 5, resize canvas paper, ligt coral to 23%, paste, invert, delete, mirror your close up tube first, then paste where you like, delete, select none.
Duplicate your close up, go to Adjust, Blur, Gaussian Blur, number on 4, change the blend mode to hard light or one you prefer, merge down.
Paste your medium size tube on the left side on the frame layer.
Resize the flower cluster sticker to 45%, place at the bottom of the frame, above the tube layer, moving to the right a bit.
Resize the rose cluster sticker to 30%, paste on the left side below the first flower layer, duplicate, mirror, adjust.
Resize the flower pot sticker to 50%, mirror, paste on the right side below the flower layers, adjust, duplicate, resize to 70%, mirror, place in front of the first flower pot, duplicate again, move to the left below your tube layer.
Resize the leafy branch to 25%, free rotate to the right at 45 degrees, move below the flower pot layer, and to the right a bit, duplicate, mirror.
Pick the wordart of choice, I used Smile often and resized it to 75%, place at the bottom and apply a fat white gradient glow, using EyeCandy 4000, gradient glow, width at 3.
Resize the light coral butterfly to 30%, place toward the bottom by the flowers, duplicate, mirror.
Resize the little mint butterfly to 15%, duplicate twice, paste where you like.
Resize the light coral large flower to 35%, apply Mura Meister Copies-Encircle with the first number on 12, paste above the mask layer and adjust to fit your tag.
Resize the chipboard border doodle to 75%, place just above the flower circle at the bottom.
Add any other elements you would like, make it your own.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Sunday, April 3, 2016
Believe in Fairies
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Elias Chatzoudis.
The tube is called Fairy Jasmine
You need a license to use this art work. Please do not use without a license.
You can find his art at his Store HERE
Supplies Needed
I used PSPX...but any of them should work.
Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
*Remember to add your drop shadow as you go along*
Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete, merge group, enlarge your mask to 110%.
Resize element 7 to 40%, move toward the bottom.
Paste element 12 on the grass more to the left side.
Paste element 15 on the left, below the house layer, duplicate, resize to 55%, move down and to the left more.
Paste element 17 on the right side below the house layer, duplicate, resize to 55%, move down and to the right a bit more, duplicate again and move to the left more.
Paste element 35 on the house layer, resize larger to 110%.
Paste your tube, mirror and place on the right or where you prefer.
Resize element 27 to 50%, place where you like, I placed mine by the hand of the tube layer.
Resize element 32 to 50%, place on the grass on the left side.
Paste element 11 on the mask layer, adjust how you like it.
Resize element 34 to 85%, paste below the pink mushroom at the top.
Resize element 23 to 40%, place on the upper right side.
Resize element 3 to 40%, paste behind your tube on the right.
Resize element 10 to 25%, mirror, place on the top layer.
Resize element 21 to 65%, mirror, place on the upper left by the mushroom.
Resize element 20 to 65%, mirror, place on the lower right side above the tube layer.
Add any other elements you would like, make it your own.
If you are going to do the animation then merge with your white background.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
Take to animation and make 20 frames, same as the animation.
On the animation, go to edit, copy all, then click on your tag, go to edit, paste into selected frame where you like, if you want to have more than one, then click paste into selected frame again.
Test and if happy save.
Resize first, then add your copyrights and name.
Take to animation and make 20 frames, same as the animation.
On the animation, go to edit, copy all, then click on your tag, go to edit, paste into selected frame where you like, if you want to have more than one, then click paste into selected frame again.
Test and if happy save.
That's it
Hope you enjoyed doing my tut.
Subscribe to:
Posts (Atom)