Cute As A Bunny

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria.

The tube is called Bunny.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Cute As a Bunny by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Melissaz Creationz Mask 1  HERE

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 11, apply your mask, delete and merge group.
Resize your mask larger to 125% or so to fit your tag better.

Paste element 05, resize to 85%, move down some.
Paste element 06, at the bottom of the frame, resize to 85%, duplicate twice, mirror one and move the other to the center.
Click inside your frame layer with your magic wand, expand by 5, paste paper 3, invert, delete.

Resize your tube to 25%, if using the same one, place on the grass layer.

Paste element 07 above the mask layer on the left, resize to 85%.

Paste element 02 below the tube layer on the upper right, resize to 90%.

Paste element 20 above the frame layer on one side, resize to 85%, duplicate, mirror, duplicate one, resize to 85%, move to the center area where you like.

Resize element 40 to 65%, place below the tube layer at the bottom of the frame, duplicate, mirror.
Resize element 17 to 65%, place above the grass layers, duplicate as many times as you like and place where you like.

Paste element 25 above the tube layer on the grass.
Paste element 27 below the rabbit.

Resize element 24 to 50%, duplicate a couple of times and place where you like.

Resize element 09 to 40%, paste on the basket, erase the loop part.

Resize some of the eggs to 50%, place on the basket, take your free hand tool, draw around the bottom half of the eggs and delete, making them look like they are in the basket.
Paste element 32 and 33 above the basket layer at the bottom.

Resize element 29 to 50%, paste below the basket behind the eggs, duplicate, move over to the right and below the grass layers.

Resize element 08 to 50%, place just above the grass layers, duplicate once or twice and move where you like.
Resize element 19, resize to 50%, duplicate, place where you like.

Paste element 10 on the mask layer, duplicate, mirror, flip and adjust both to your liking.

Paste element 21, duplicate 3 times, moving one down, one up and one more in the center.

Resize element 23 to 50%, duplicate, place on the grass layers.

Resize element 13 to 50%, place by the grass on one side, duplicate, mirror, duplicate again, move more to the center.

Resize element 28 to 50%, place by the basket on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Happy Easter

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called LuLu.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Template by Fired by Flamin HERE
You can DOWNLOAD the template HERE

 Scrap Happy Easter by Kittz Kreationz  HERE
Check out the rest of the blog  HERE
 WSL_Mask 84 HERE

  Font of Choice, I used Yaquote Script

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit d to duplicate and close the original, delete the credits and wordart and green rectangles 1 and 2.

Make a new raster layer, fill with #6329c4, apply your mask, delete, select none, move to the bottom layer.
Paste element 16 just above the mask layer.

Paste element 4 below the yellow circle layer of the template.

Select the yellow circle on the template, go to Selections, select all, float, defloat, Modify, selection borders, number on 3, add a new raster layer, fill with white, select none, add noise at 50%.

Select the blue rectangle, add a new raster layer, fill with #6329c4, then go to Selections, Modify, selection borders, number still on 3, fill with white and add the noise at 50%.

Paste element 35 on the Pink Oval, resize to 93%, click inside with your magic wand, expand by 5, mirror your close up first, then paste, invert, delete, select none.
Duplicate your close up, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to overlay, merge down.

Resize your full tube to 90%, paste on the right side.

Paste element 14 in the center below the tube layer at the bottom, resize to 55%.
Resize element 43 to 75%, paste on the left side.
Resize element 30 to 65%, place on the right below the easter egg wordart layer.

Resize element 23 to 35%, place on the left by the basket.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Springtime Is Here



 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
The tube is called Spring
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Luck of the Charms by Disturbed Scraps  HERE
Check out the rest of the blog HERE
DD Mask 4 HERE
Check out the rest of the blog HERE
 

 Font of Choice, I used Chalked Hand Lettering Shaded

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete, merge group.

Paste element 12, resize to 80%, move to the left some, duplicate, mirror, move the edges until they touch, merge down.
Click inside all the frames with your magic wand, expand by 5, paste paper 4, invert, delete, resize your tube to 45%, paste in the left side frame, delete, select none, change the blend mode to overlay.
Paste the resized tube above the frame to the right.
Paste element 21 on the left side of the tube.

Resize element 041 to 80%, place at the bottom below the tube layer, duplicate 3 more times and adjust to your liking.

Paste element 039 on the left just above the mask layer, duplicate, mirror, resize to 85%, move above the frame layer.

Paste element 040 below the first trees, duplicate twice, one on one side, the other on the other side and one in the center, adjust.

Resize element 038 to 50%, place on the right side above the frame layer at the bottom, erase the part over the frame layer going toward the back, duplicate, mirror.

Resize element 59 to 60%, place on the fence at the front, duplicate several times and place on the fence on both sides and a couple behind your tube, moving the one behind your tube below the grass layers.

Paste element 37, resize to 85%, take your free hand and draw around the green ribbon and delete, place on the right side by the fence.
Duplicate one of the long flowers and resize to 75%, place in front of the sign.

Resize element 57 to 15%, and element 51 to 25%, duplicate a few times and place them on the grass how you like.
Resize element 23 to 75%, place on the grass below the tube layer.

Resize element 46 to 35%, place at the upper left side, duplicate, mirror, move down on the sign, duplicate again and mirror, place where you like.

On your sign, write out Springtime or a wording you prefer.

Resize element 24 to 75%, place at the top on the trees.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Spring Time

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria.

The tube is called Carrie.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Hop Into Spring by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Melissaz Creationz Mask 5  HERE
WSL_Mask 84 HERE

Font of Choice, I used Amaldemo

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

I will tell the flowers I used, but feel free to use any or all the ones you prefer.

Open a new image 800 x 800 or one you prefer.
Paste paper 6 or one of choice, resize Mask 5 larger to 125%, apply, delete and merge group.
Paste paper 6 again and apply WSL_Mask 84 this time.

Paste element 04, resize to 90%, move toward the bottom more.

Paste element 14, resize to 80%, place on the right, duplicate, mirror, duplicate again and move to the center more.

Resize your tube to 35%, if using the same one I am, mirror, paste more to the left side, and below the grass on the right.

Paste element 18 on one side below the grass layers, duplicate mirror.
Paste element 25 on the left below the flower layer, duplicate and move down some, duplicate, move over to the right more.
Paste element 35 on the left below the tube layer by the arm, duplicate, move up a little, duplicate, mirror, duplicate again and move over a little.

Paste element 24 below your tube layer by the leg, duplicate, move over more to the right and down a bit.

Resize element 08 to 85%, place on the left side of your tube. Paste and flowers you would like to put in the basket or eggs.

Resize element 11 to 80%, place in front of your tube where you like.

Resize element 26 to 65%, place in front of the basket.
Resize element 06 to 70%, place below the rabbit layer on the right.
Resize element 34 to 65%, place below some of the flower layers, where you like, duplicate and move over to the center more, duplicate again and move to the left by the tube's hand.

Paste the wordart at the top, take your free hand tool, draw around in the air, copy and paste as a new image, then delete the one on your tag, now paste the copy one onto your tag and move down and over to the right more.

Paste element 02 at the top below the tube layer, resize to 85%, erasing any of the outer clouds you do not want.

Resize element 19 to 55%, paste at the upper left behind the tube, duplicate, mirror, move down by the fence more, erase the ones on the right, duplicate, move to the top of the wordart.

Paste element 22 on the fence layer, adjust how you like it.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Just Beachin

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Jose Cano.

The tube is called Candy

You need a license to use this art work. Please do not use without a license.
 

 You can find his art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Beachin by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Melissaz Creationz Mask 10 HERE
Filters
Mura Meister Copies

Font of Choice, I used Beach Type

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 9, apply your mask, delete, merge group.
I resized my mask larger to 130%.
Paste paper 10, apply the mask again, delete, merge group, resize this mask to 125% and flip.

Resize element 08 to 50%, paste on the mask, apply Mura Meister Copies-H-Tile (random rotate line), leave all numbers as is, then resize your mask larger to 130%, apply, delete and merge group. Lower the opacity to 75%.

Paste element 22, resize to 80%, place at the bottom.

Paste your tube in the center, resize to 60%, mirror.

Resize element 5 to 70%, place on the left side below the tube, duplicate, mirror,
move over a little bit to the right.

Resize elment 23 to 60%, place on the right above the tree layer.

Resize element 24 to 65%, place on the left in front of the tree.

Resize element 21 to 60%, place by the chair on the left, below the tube.
Paste the wordart Beachin in front of your tube at the bottom.

Resize element 28 to 50%, place on the cooler chest.
Resize element 20 to 50%, place on the cooler chest in front of the radio.
Resize element 33 to 25%, place on the cooler chest in front of the drink.
Resize element 30 to 35%, place by the cooler chest at the bottom, below the tube layer.
Resize element 27 to 40%, place on the chair.

Resize element 15 to 25%, place on the right side, duplicate, move at the bottom of the wordart.
Resize element 31 to 40%, place by the chair on the left side.
Resize shell 13 to 40%, place by the wordart, resize shell 12 to 30%, place by the first shell, duplicate this one, mirror.
Resize element 17 to 30%, place on the right side.

Resize element 08 to 40%, place on the right below the suntan lotion tube, duplicate, resize to 50%, move over some, duplicate again and move over a bit more.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

St Patty Beauty

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Barbara Jensen.

The tube is called Blueberry Pie-Layered #64.

You need a license to use this art work. Please do not use without a license.
 

 You can find her art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Luck of the Charms by Disturbed Scraps  HERE
Check out the rest of the blog HERE
Mask WSL_84  HERE

Font of Choice, I used give me some sugar

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 10, apply your mask, delete, merge group.
I resize my mask larger to 110%.

Paste element 012, free rotate to the left at 5 degrees, move to the left some, click inside with your magic wand, expand by 5, paste paper 06, invert, delete, mirror and paste your tube, delete, select none.
Duplicate your tube, Gaussian blur at 4, change the blend mode to screen, merge down, now change the blend mode to Luminance (L).
Close off your mask and any background you might have, merge these layers together, then reopen your mask and background layer.

Paste your tube on the right side above the frame layer, moving to the right more.

Paste element 040 on the right below your tube layer and move up some, duplicate, mirror, duplicate again, move down and erase the trunk part showing at the bottom, adjust to your liking.
Paste element 052 on the upper right below the frame layer, adjust a bit above the tree, duplicate, mirror, flip, adjust, duplicate, mirror, adjust again.

Paste element 025 below the tube layer at the top.

Paste element 059 on the right below the sparkle layer close to the left side of the tube, duplicate, move out up a bit higher on the right of the tube.
Duplicate, mirror, duplicate, resize to 75%, adjust both on the left side.

Paste element 029 on the tube layer at the bottom to cover the cut off part of the legs.
Paste element 03, resize to 50%, place on the left side.
Resize element 008 to 55%, place on the left below the wordart sign.

Paste element 060 on the left bottom side below the frame layer, duplicate, mirror, move above the long flower stem on the right side.

Resize element 055 to 55%, paste below the frame layer on the left at the bottom, duplicate, mirror, duplicate again and move more to the center and above the green leaf layer. Duplicate the left one again, flip, move down some and below the large flower layer.

Resize element 047 to 60%, duplicate once or twice and place them where you like.
Resize element 023 to 95%, paste at the bottom on the top layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.