Sunflowery Day

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called Sunflower

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Sunflower Daze  by Jenns Designs HERE
Check out the rest of the blog HERE
Rachael Designs Mask Set 111_4  HERE

Font of Choice, I used Good Dog Cool

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 6 or one of choice, apply your mask, delete and merge group.

Paste element 45, resize to 90%, move down some.
Paste element 5 below the grass layer.

Paste your tube, resize to 30% and place on the grass.

Paste element 8 on the right, below the grass layer, duplicate, mirror.
Resize element 24 to 50%, place below the fence on the right, duplicate 3 more times, adjust to your liking.

Resize element 40 to 55%, place on the left below the dog layer.

Resize element 17 to 25%, place in front of the tube layer by the feet, duplicate, resize to 70%, place over by the bucket, duplicate again, mirror, move below the tube layer.
Paste element 11 below the grass layer, resize to 75%.
Resize element 18 to 60%, place on the left side.
Resize element 14 to 75%, paste on the mask layer, duplicate, mirror.

Paste element 9 above the mask layer at the upper left, duplicate, mirror, duplicate, flip, duplicate, mirror.

Paste element 50 on the top layer at the upper right.
Resize element 48 to 50%, place on grass on the right, duplicate a couple more times and place by the dark part of the flowers on the right, and move one down a bit more.
Resize element 34 to 50%, free rotate to the left at 90, paste at the bottom above the grass layer on the left, duplicate, mirror.

Resize element 7 to 75%, free rotate to the left at 50, paste above the wagon on the right, erase some of the string by the flowers.

Resize element 22 to 50%, place in front of the tube on the right.
Resize element 38 to 70%, paste below the tag layer you just pasted, duplicate, mirror.
Resize element 23 to 25%, mirror, place on the stem of the flower on the tube.
Paste frame 1 below the mask layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Just A Cowgirl

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

The tube is called Cowgirl 4.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art at PFD  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Scrap Boot, Scoot & Boogie by Sweet Cravings Scraps  HERE
You can check out the rest of the blog  HERE
WSL_Mask 84 HERE

Font of Choice, I used Do I Like Stripes

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 13, apply your mask, delete, merge group.

Paste barrel top, resize to 85%.
Paste the fence below the barrel top, resize to 85%, move toward the bottom more.
Paste grass 1, resize to 95%, duplicate a couple of time, moving one below the barrel top and the others above the barrel top.
Resize the truck to 90%, paste above the barrel top and down in the grass a bit.
Resize the tree to 75%, paste one in front of the truck on the left, duplicate, mirror, move below the barrel top on the right.

Paste your tube below the top grass layer, resize to 40%, mirror, adjust.

Paste the flower row above the truck layer at the bottom, resize to 95%.

Resize flower 9 to 10%, duplicate as many times as you like and place in different areas.
Resize flower 6 to 10%, place by the legs of your tube, moving one behind the tube, duplicate a couple more times and move around.

Resize flower 7 to 40%, place below the truck layer on one side, duplicate, mirror, duplicate again, move above the truck layer and place where you like.
Resize flower 8 to 40%, duplicate and place where you like.
Resize any other flowers you would like to use and place where you like.

Resize the wheel barrel to 50%, place on the left below the tube layer.
Resize the wheat to 50%, place below the flower border off to one side of the tube, duplicate, move over more to the other side of the tube, duplicate again and move to the left more.

Resize the eagle to 40%, paste at the top.

Write out what you would like on your tag, I wrote Just A Cowgirl and placed it at the bottom part of the tag. I also selected the wordart, expand by 2, new layer, fill with a color of choice, move below the top wordart.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Honor & Courage

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Private Penni.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Memorial Day by Gimptastic  HERE
Check out the rest of the blog  HERE
WSL_Mask 84  HERE

Filters
Mura Meister Copies-Encircle
  Font of Choice, I used Arial Black

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 4, apply your mask, delete, merge group.
Resize your mask as needed.

Paste frame 1, click inside with your magic wand, expand by 5, paste paper 4, invert, delete, move below the frame, paste your close up tube, delete, select none.
Duplicate the close up, go to Adjust, Blur, Gaussian blur, number on 4, on the bottom tube, change the blend mode to
Luminance(L) and on the top tube change the blend mode to soft light, merge down.

Paste your full tube on the right side.

Paste element 7 behind your tube layer.

Resize element 11 to 75%, place toward the left side.

Resize element 9 to 75%, place at the top where you like.

Resize element 15 to 75%, place below the close up tube layer in the frame and toward the top left, duplicate, move down some, duplicate, mirror, move down some.

Resize element 24 to 55%, mirror, paste below the tube on the right.

Resize element 21 to 50%, place on the left by the crate.

Resize element 8 to 50%, place below the helmet, duplicate, mirror move back to the left below the crate.
Resize element 19 to 50%, place on the crate.

Resize element 10 to 75%, place on the left on the crate, below the name tags and the top boot.

Resize wordart 2 to 75%, place at the top.
Resize wordart 1 to 50%, place on top of the other wordart and move down a little bit.

Resize element 5 to 80%, apply Mura Meister Copies-Encircle, first number on 12, paste below the mask layer.

Resize element 14 to 40%, mirror, place at the top right below the tube layer.
Resize element 18 to 40%, place below the helmet.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Just BEE Happy

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Zlata_M.

The tube is called Just Bee

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Bee My Honey by Carita Creationz  HERE
Be sure to check out the rest of the blog HERE

RR Mask Set 60_Mask 1   HERE
Check out the rest of the blog HERE
 

Font of Choice, I used Mala TestaN

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 5, apply your mask, delete, merge group, resize your mask
larger to 125%.
Paste element 4, click inside with your magic wand, expand by 5, paste paper 3,
invert, delete, move below the frame, do not deselect yet.

Paste your full tube on one side under the frame layer, duplicate your full tube, mirror and paste in the other frame, delete both, select none.
Merge the tubes together, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to screen.

Resize your full tube to 75%, paste on top of the frame layer in the center.

Paste element 32 on top of your tube layer toward the bottom, select all, float, defloat, add a new layer, move below the wordart, expand by 2 fill with #e2d401,
select none. Being on the top wordart, merge down.
Erase part of the legs showing below the wordart.

Paste element 27 on the mask layer at the bottom, free rotate to the left at 90 degrees, duplicate, flip, mirror.

Paste element 29 below the paper layer of the frame on one side, duplicate, mirror.

Paste element 9, resize to 35%, place at the bottom of the wordart.
Resize element 8 to 35%, place on the honey cone.
Resize element 15 to 40%, place by the honey cone, sharpen once.
Resize element 2 to  30%, then on the original, resize to 20%, duplicate as many times as you like and place where you like on the tag.

Paste element 22 below the tube layer, free rotate to the left at 90, place how you like, duplicate, mirror, erase any of the stem showing, adjust.

Resize element 11 to 35 %, place on the frame layer by the tube on the left.

Paste element 20 on the mask layer at the upper left, duplicate, flip, mirror.

Paste element 16 at the upper left, above the glitter layer, duplicate, mirror and move down just a bit, adjust to your liking.

Paste element 28 above the net layers, off center to the left of the tube, duplicate, move over to the right of the tube and down a bit, duplicate again, mirror, move down toward the bottom, duplicate, mirror.


Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Memorial Day Wordart

I have some Memorial Day wordart for you all in PNG format.

Just right click and save!

 

 

Lady Lovebug

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.

This tube is one of her lady bug special edition.

 

You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Lovebugs Love by Sassy Dede  HERE
Check out the rest of the blog HERE
DD_NFM_2015_4 Mask HERE
Check out the rest of the blog HERE
 WSL_Mask 84 HERE
20 20 Mask HERE

 

Font of Choice, I used Flower in the Window

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 7, apply DD mask first, delete, merge group, then paste paper 7 again and paste WSL_Mask 84, delete, merge group.
On the mask layer, select all, float, defloat, paste your close up tube, place how you like it, invert, delete, select none, change the blend mode to screen.

Resize frame 4 to 65%, paste below the tube layer on the mask.

Paste element 32, resize to 75%, move down some.

Resize your tube to 35%, place on the wagon more toward the left.

Paste element 85 below the wagon, apply the 20 20 mask, delete, merge group, duplicate the grass and move above the wagon and over some.

Resize element 70 to 40%, place under the tube layer to the left, duplicate, resize to 75%, move to the right more, duplicate again and resize again to 75%, move to the right more.

Resize element 42 to 25%, place on the flower where you like.

Resize element 72 to 10%, move below the tube layer in the wagon, take your free hand tool, draw around the bottom part, delete,  make it look like it is in the wagon.

Resize element 86 to 45%, place below the grass layer on the left, duplicate, mirror, move down into the grass, duplicate again, resize to 50%, move above the wagon and place by the wheel, duplicate, mirror.

Resize the shoes to 20%, place on the left on the flowers.
Resize element 72 to 20%, place below the shoe layer on the left.

Resize the butterflies, one to 15% and the other to 10%, place where you like, duplicate a couple of times and move around.

Duplicate the large flower at the bottom, move to just above the mask layer, duplicate, mirror.
Resize element 10 to 20%, place between the flowers at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Happy Mother's Day to All

 

 

Just showing off a tag I made for Mother's Day and wanted to wish

all the Mom's a wonderful Mother's Day

I am using the awesome artwork of Alex Prihodko.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

I used this Scrap Spring Bouquet by Lady Dragus HERE

Check out the rest of the blog HERE
Wordart by me HERE