Canadian Babe Eh! (No Scrap)

 

 

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Elias Chatzoudis.

The tube is called Canadian Beauty

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE or at CDO HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Dangerously Delicious Canada Day Template 2  HERE
Check out the rest of the blog HERE

Filters
VM Extravaganza Filter-Transmission
AAA Frame-Foto Frame

Font of Choice, I used Palatino Linotype

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*


 SIGNATURE TAG
 

Open a new image 600 x 250, fill with white, apply the VM Extravaganza filter-Transmission with these settings
24, 0, 15
Click on the gray lines with your magic wand, fill with #b80407, add noise at 50%.
On your template, close off the layers except for the Green Center Square, Center White Outline, Layer 6, Layer 3, Red leaf, leaf outline d/s, leaf outline, Top leaf circle, copy merged, paste on the left side of your signature tag, resize to 50%.
Click on the green square with your magic wand, paste your close up tube, invert, delete select none. Duplicate your tube, Gaussian blur at 4, change the blend mode to hard light or one you prefer. Click on the red leaves with your magic wand and add noise at 50%.
Close off your background and merge visible, duplicate, mirror, adjust.

Paste your tube in the center.

Back to the template, close off all the layers but the wordart layers, copy merged, paste on your tag, resize to 50%, add a medium white gradient and place at the bottom or where you like.
Before merging and adding your frame, you will close off your tube layer and wordart layer, copy merged to your Avator tag, then reopen the wordart and copy and paste that to the Avator tag also.
Now merge visible and add your frame.

For the frame I used AAA Frame-Foto Frame
 Width 3, Matte 2, Opacity 100, all other numbers on 0.
Add your copyright and name.

AVATOR
Open a size that is allowed for your group or forum, I did 200 x 200.
 Copy your signature tag, paste, resize to 85%, place how you like, then paste the wordart, resize to 55%, place at the bottom.
 Once happy, merge visible and add the same frame as before.

 Add your copyright and name.

 

That's it

Hope you enjoyed doing my tut.

Celebration (3 Piece Set)

 

 

with or without the tube

 

  This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Heroic Girl

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap 4th Celebration Blog Train by Melissaz Creationz  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE
DD Patriotic Mask 3 HERE
Check out the rest of the blog HERE

Filters
Screen Works-Light Gauze
Mura Meisters Copies-Tiling

Font of Choice, I used Acryle Script

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 5, apply DD mask 3, delete and merge group, resize larger to 115%.
Paste paper 5 again, apply WSL Mask 84, delete, merge group, select all, float, defloat, resize your full tube to 65%, paste on the left, apply Mura Meister Copies-Lines, 1/n Fade out checked, invert, delete, select none.
Duplicate the tube, Adjust, Blur, Gaussian blur, number on 4, change the blend mode to Screen, then apply the Screen Works filter-Light Gauze.

Resize element 15 to 85%, apply Mura Meister Copies-Encircle, paste below the mask layers.
Paste element 4 below the star circle you just made on one side, duplicate, mirror.

Resize your full tube to 65%, paste on the right side.

Paste element 2 below the tube layer, apply Mura Meister Copies-Tiling with the gap number set to 10, erase the outer parts you don't want or use your free hand tool and go around the outside ones and delete. Use a white drop shadow first then your darker one.

Paste element 15 between the music line, duplicate and move down between the other one, same drop shadow, white first.

Duplicate your tube and move to the top layer, erase the legs covering the music lines at the bottom and erase the legs showing below the lines.

Resize element 12 to 35%, place on the left by the music note, duplicate, move up, duplicate, mirror, duplicate, move down, having all above the music lines.

Add any other elements you would like.
Once happy with your tag, close off any background if you used one, merge visible, resize first, then add your copyright and name.

 Signature tag

Open a new image 600 x 250, paste paper 5.
Resize your full tube to 70%, paste and move so just the flag part is showing more toward the left side, apply Mura Meister Copies-Lines, 1/n Fade out checked, duplicate, Adjust, Blur, Gaussian blur on 4, change the blend mode to screen, apply Screen Works-Light Gauze, merge down.

Paste your full tube to the left, resize to 70%, being on the top layer now.

Resize element 2 to 60%, paste below the tube layer and move the edge touching the left side.
Paste element 15 at the top how you like below the tube layer, duplicate, flip.

Add any other elements you would like.
For the frame I used AAA Frame-Foto Frame
 Width 3, Matte 2, Opacity 50, all other numbers on 0.
Add your copyright and name.

Avator
Open a size that is allowed for your group or forum, I did 200 x 200.
 Copy your signature tag, paste, resize to 85%, place how you like, with or without the tube showing, once happy, merge visible and add the same frame as before.

 Add your copyright and name.

 

That's it

Hope you enjoyed doing my tut.

Summer Moment (3 Piece Set)

 

 

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Beauty Girl Spring

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Summer Moment by Molemina  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE

Filters
dsb flux-gears
AAA Frame-Foto Frame

Font of Choice, I used AL Sandra

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 2 to 23%, apply the dsb flux filter-gears with both numbers on 65, then apply your mask, delete and merge group.

Resize cluster to 15%, paste on one side, duplicate, mirror.

Paste your tube below one of the clusters, resize to 90%, duplicate, move above the cluster and erase the parts you don't want showing. I left the hand above the log.
Duplicate both tubes, apply the Gaussian blur at 4 on each of the duplicated ones, then change the blend mode to hard light on each one.

Resize wordart 3 to 15%, paste on the mask layer on the right side.

Resize element 85 to 10%, paste on the right above the wordart.

Resize element 15 to 10%, paste in front of the basket, duplicate, mirror, move about the cluster and up some.

Resize element 8 to 15%, paste below the basket layer on the right and move up, duplicate,  move above the flowers on the basket, duplicate again, mirror, move up some, duplicate again, move over more to the left and down.

Resize element 7 to 5%, duplicate a couple of times and place above the tube layer at the bottom where you like.

Resize element 23 to 25%, paste on the tube layer by the hand, duplicate, mirror, paste below the tube layers, move up more on the left.

Resize element 14 to 15%, paste below some of the flower layers, duplicate, mirror.
Resize element 51 to 10%, paste at the top by the flowers, erase the ones you don't want.

Add any other elements you would like, make it your own.

Once happy with it all, close off any background and merge visible, resize and add your copyright and name.

 Signature tag

Open a new image 600 x 250, resize paper 2 to 20%, paste, apply the dsb flux filter-gears, both numbers set on 65, sharpen once.

Paste your tube a little off center, duplicate, Gaussian blur at 4, change the blend mode to hard light, merge down, sharpen once.

Resize the cluster to 10%, paste on the left side above the tube layer, duplicate, mirror.
Resize element 7 to 5%, place below the log on one side, duplicate, move over by the other log, duplicate again and move to the center and down just a bit.
Resize element 17 to 10%, paste between the flowers, duplicate, mirror.

Resize element 85 to 10%, paste on the paper layer on the right.
Resize element 15 to 10%, paste on the right below the tube layer, duplicate, move to the left and down some.
Resize element 23 to 25%, paste on the tube layer and move to the right how you prefer, duplicate, mirror, move below the flower layer.

Resize element 8 to 10%, paste just above the basket on the right.

Resize wordart 3 to 10%, paste on the paper layer on the left side, do not merge.
Add any other elements you would like.

Once you have completed your Avator,  reopen the tube, merge visible and frame using AAA Frame-Foto Frame
 Width 4, Matte 1, Opacity 50, all other numbers on 0.

Avator
Open a size that is allowed for your group or forum, I did 200 x 200.
On your signature tag, close off the tube layer, copy merge and paste on your new layer, resize to 90%, adjust to your liking, merge visible, crop.

Add the same frame as for the signature tag.

Once happy with it all, add your copyright and name.

 

That's it

Hope you enjoyed doing my tut.

Geisha Beauty (3 Piece Set)

 

 

      With or without a tube       

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Geisha.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Chinese Magic in Bundle 2 by mysterfeerie creations  HERE
Check out the rest of the blog  HERE
RD Mask Set 115 #3  HERE
Check out the rest of the blog HERE

Filters
AAA Frames-Foto Frame

  Font of Choice, I used DomBold BT
 

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 2, apply your mask, delete, merge group, duplicate the mask and merge down with the first one.

Paste cadre 3 move over and up on the left some, duplicate, move to the right and down some and below the first frame, erase the part showing in the top frame, being on the top frame, merge down.
Click inside with your magic wand, expand by 5, paste paper 3, adjust to your liking, invert, delete.

Paste your tube about center on top of the frame layer.

Paste element 7 on one side on the frame layer, duplicate, mirror, adjust later to fit how you like.

Paste element 67 below the tube layer and move a bit to the left.
Paste element 82 on the left, duplicate, mirror, move below the first one, then adjust your tube how you want it on the rocks.
Paste element 27 on the right below the tube layer, duplicate, mirror, move below the rock layer and up a bit.

Paste element 87 below the tube layer on the right, duplicate, mirror, move below the rock layer on the left and up some.

Paste element 13 at the top right on the top layer, resize to 70%.
Resize element 12 to 40%, place on the left in front of the rock.
Resize element 58 to 75%, place on the left below the rock layer, duplicate, mirror, move above the fern layer, adjust.
Resize element 56 to 60%, paste below the rock layer, duplicate a couple of times and place where you like.
Resize element 86 to 40%, place on the left side.
Resize element 11 to 50%, place on the right below the tube layer at the bottom.
Paste element 70 on your tube layer.

Add any other elements you would like, make it your own.

Hold the shift key and hit the letter D to duplicate your tag then,

crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

Signature tag
Open a new image, 600 x 250, fill with #540201.
On your original tag, close off the tube layer, copy merged and paste above the color layer and adjust to your liking.
Reopen your tube layer and paste on one side, duplicate, mirror, change the blend mode to Hard light.
Paste your middle size tube off center.

For the frame I used AAA Frames-Foto Frames with these settings
Width 3, all other numbers on 0 except the Opacity is set at 50
Add your copyrights and name.

Avator
Open a new image to a size you use in your groups or forums.
Mine is 200 x 200, copy merged your signature tag, paste and adjust to your liking, and apply the frame like before.
Add your copyright and name.

 That's it

Hope you enjoyed doing my tut.

USA Strong

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called USA Strong.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  The Red, White and Blue by Tasha's Playground  HERE
Check out the rest of the blog  HERE
WSL_Mask 84  HERE
DD Patriotic Mask 4 HERE
Check out the rest of the blog HERE

Filters
Xero-Artworx
Mura Meister Copies-Encircle

  Font of Choice, I used Xiomara

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 7, apply DD Patriotic mask, delete, merge group, resize large to 110%.
Paste your close up tube, apply WSL Mask 84, delete and merge group.
Duplicate the tube, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to screen, apply the Xero filter-Artworx, default settings, merge down.

Paste frame 4 below the tube layer, resize larger to 110%, click inside with your magic wand, expand by 5, paste paper 5, invert, delete, move below the frame layer.
Resize the stars to 75%, apply Mura Meister Copies-Encircle, paste below the paper layer of the frame.

Paste fireworks 3 at the top below the star layer on the left, duplicate, mirror, duplicate, flip, duplicate, mirror, adjust all to your liking.
Paste fireworks 2 at the top below the red fireworks, duplicate, flip, duplicate, move to one side, duplicate, mirror, adjust.

Paste your full tube on the top layer on the right side.

Paste the car on the right below the tube layer.
Paste flower 2 below the car and move over and up some, duplicate, mirror, duplicate, resize to 75%, move above the car layer and to the right some, duplicate again and move over, duplicate once more and move to the right more.

Resize the shopping bags to 75%, place on the left below the smaller flower layer.
Paste flair 2 on the left on the frame.
Resize the flame to 50%, place below the car on one side and the bags on the other side.
Resize the bird to 50%, place in front of the flowers on the left.
Resize candy 3 to 50%, place below one of the flower layers how you prefer.
Resize the blue flower to 50%, place between the red flowers where you like, duplicate a couple of times, move one to the right below the car layer and the other to the left below the bags.

Paste wordart 2 on the close up tube layer.

Paste star 4 above the close up tube on the right, duplicate, resize to 75%, and move about center of the flowers.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

USA Proud

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Wave the Flag.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Fourth of July by Wicked Princess Scraps  HERE
Check out the rest of the blog  HERE
WSL_Mask 84  HERE
DD Patriotic Mask 3 HERE
Check out the rest of the blog HERE

Filters
Screen Works-Light Gauze
Mura Meister Copies-Encircle
  Font of Choice, I used The AMERICAN

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 8, apply WSL_ Mask 84, delete, merge group.

Paste paper 8 again, apply DD Patriotic Mask 3, delete, merge group.

Paste element Star 2, resize larger to 115%.
Paste the Burst next, resize larger to 125%.
Paste the scatters at the upper right, duplicate, mirror, flip, adjust.

Paste frame 2, then frame 3 on top of that one, click inside the first frame, expand by 5, paste paper 4, invert, delete, paste your close up tube, position, delete, select none, moving below the frame layers.
Duplicate, Gaussian blur at 4, change the blend mode to screen, apply the
Screen Works filter-Light Gauze, merge down.

Paste ribbon 2, apply Mura Meister Copies-Encircle, move below the paper layer of the frames, enlarge to your liking to fit your tag.

Paste your middle size tube on the left, paste ribbon 2 on the legs of the tube.
Paste flower 4 below the ribbon, resize to 75%.
Resize tag 3 to 60%, free rotate to the left at 45 degrees and place on the ribbon.
Resize the key to 50%, free rotate to the left at 90 degrees, place below the ribbon layer.
Resize balloon 2 to 50%, move below the tube layer by her hand.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Rockin USA

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Rockin USA.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Yankee by Irish Princess Designs  HERE
Check out the rest of the blog  HERE
WSL_Mask 84  HERE

Filters
Screen Works-Light Gauze
  Font of Choice, I used The AMERICAN

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 10, resize to 84%, apply your mask, delete, merge group.
Paste paper 6, resize to 84%, apply your mask, delete, merge group.

Paste element 30, click inside with your magic wand, expand by 5, paste paper 8, invert, delete, move below the frame, select none.
Apply Screen Works-Light Gauze to the frame.

Paste your middle size tube below the frame, then select your selection tool, draw around the upper half of the tube, go to Selections, Promote Selection to layer, select none and move this layer above the frame layer.
Erase any of the bottom tube showing below the frame at the bottom.

Paste element 14 above the top mask layer at the bottom right, duplicate, flip, mirror.
Resize element 26 to 85%, place at the upper right above the sparkle layer, duplicate, flip, mirror.
Paste element 24 on the tube layer on one side, duplicate, mirror, move below the tube layer on the right.

Resize element 13 to 75%, paste on the right below the sparkle layer.

Resize element 22 to 55%, place on the right side on the frame, duplicate, resize to 75%, move down some by the first cupcake.

Resize element 10 to 75%, free rotate to the left at 90, place at the bottom below the smaller cupcake layer, duplicate, resize to 65%, place in front of the larger one.
Resize element 28 to 20%, mirror, place where you like on the left side.

Resize element 23 to 50%, free rotate to the left at 15, place on the left side, duplicate, move up some, move the sparkle layer above these two.
Duplicate the top one, mirror, move below the sparkle layer on the right.

Paste element 15 below the firecrackers at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Howdy

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Ride Me

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Chaps by Digicats (& Dogs)  HERE
Check out the rest of the blog HERE
WSL_Mask 84 & Mask 350  HERE

Filters
Mura Meister Copies-Encircle
Xero-Artworx

Font of Choice, I used I.F.C. Los Banditos

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 18 or one of choice, apply Mask_84, delete and merge group, resize mask larger to  110%.
Paste the grassy border, apply Mask_350, delete and merge group.

Frame 4, take your free hand tool, draw around the frame part, delete, paste the belt on the mask layer, apply Mura Meister Copies-Encircle, if part gets cut off, move the belt down a bit and try the Encircle again, then click inside with your magic wand, expand by 10, paste paper 19, invert, delete, move below the frame layer you just made.
Apply the xero filter-Artworx to the frame.

Paste your tube, resize to 80%, place in the center or where you prefer.

Paste the Pine tree on the left.

Resize the bull to 50%, place on the left below the grass layer, and hide the bottom part of the tree trunk.
Resize horse 2 to 55%, mirror, place below the grass layer on the right.

Paste the Western tree 01 on the right below the horse and hide the bottom of the tree, erase some if you need too, duplicate, move more to the center and down a bit behind the tube.
Resize the stone and scrub to 55%, duplicate a few times, place below the grass layer where you like, duplicate one again and resize to 55%, duplicate this one a couple more times and place them above the grass layer where you like.

Paste cactus 6, below the grass layer on the right side of the tube, duplicate, move below the tree layer, resize to 75%, duplicate, mirror.
Resize the buffalo skull to 30%, place on the grass layer on the right.
Resize cactus 1 to 30%, place below the skull on the right, duplicate, mirror, duplicate, move just above the large cactus at the bottom.
Duplicate as many times as you like and place around the grass layer.

Resize eagle 2 to 35%, place at the upper right, duplicate, mirror, move where you like on the left side.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Any one can be a Father

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

The tube is called Blue Eyes

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Dear Old Dad by Gimptastic HERE
Check out the rest of the blog HERE
Rachael Designs Mask Set 85_3  HERE
Check out the rest of the blog HERE
Filters
Xero-Artworx

Font of Choice, I used Great Vibes

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 9 or one of choice, resize larger to 135%, apply your mask, delete and merge group, flip.
 Adjust your mask later to fit your tag better.

Paste frame 3, click inside with your magic wand, expand by 5, paste paper 3, below the frame, invert, delete, now paste your middle size tube, if using the same one I used, delete, select none.
Duplicate the tube, Adjust, Blur, Gaussian blur at 4, change the blend mode to hard light or one you prefer.
Apply the Xero filter, Artworx with the default settings, merge down.
Close off your mask layer, merge visible, duplicate, resize to 50%, free rotate to the right at 10 degrees, duplicate, mirror one, place both on the right side. Duplicate one to 50% again and move down to the bottom.
Sharpen the pictures once.

Move the larger picture to the left a bit.

Paste the balls below the smallest picture at the bottom.
Resize the radio to 50%, place on the right below the balls layer.
Resize the camera to 50%, place by the smallest picture at the bottom.
Resize the Binoculars to 50%, place below the camera layer.
Resize beer 2 to 75%, place on the left, resize beer 3 to 60%, place in front of the beer bottle on the left.
Resize the keys to 35%, place by the radio.
Resize the dog to 85%, place behind the beer bottle on the left.
Resize the watch to 35%, place in front of the beer glass on the left.

Paste the leather strap, free rotate to the right at 90, move to just above the mask layer and out from the frame some, duplicate, mirror, adjust.

Type out what you would like your wordart to say and place at the bottom.
I typed out using Great Vibes font

"Anyone can be a Father...
but it takes someone special to be a dad."...
                                  -Anne Geddes

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.