You're Awesome

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called Autumn.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
SE_Template 29 HERE
Check out the rest of the blog HERE

 Scrap Harvest of Blessings by Horseplay's Pasture Design  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 128_Mask 4  HERE
Check out the rest of the blog HERE

 Font of Choice, I used Hector le Dragon

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open the template, hold the shift and hit the letter d to duplicate, close the original,
delete the credits.
Paste paper of choice, I used #6, apply your mask, delete, merge group.

Background square, select, float, defloat, paste paper of choice, I used # 4, invert, delete, delete the template layer also.
On the arrow shape bg, add noise at 75%.
Select the arrow shape, select all, float, defloat, paste paper 3, invert, delete, delete the template layer also.
Select the double strip, paste paper of choice as before, I used #14 and delete.
Right frame bg, select, float, defloat, paste paper # 14, invert, delete, delete the template layer also.
Right frame fill, paste paper 12, invert, delete.
Do the same with the Left frame fill, with the same paper.

Select the black wordart, paste paper # 14, invert, delete, delete the black wordart, add noise at 40%, then merge down with the other two parts of the wordart,
free rotate to the right at 90, move to the right how you like.

Paste element 24 below the right frame, erase the parts showing outside the frame, duplicate,
move up to just below the left frame, position and erase any part outside that frame also.

On the right frame, select all, float, defloat, paste paper # 11, invert delete, delete the white frame also.
Do the same with the left frame also.
Then go to Effects, 3D Effects, Inner bevel with these settings and apply to both frames.
Bevel Shape 2
Width 2
3, 2, 0, 10
315, 50, 30
color white
Paste your tube, resize to 35%, place in the center, being on the top layer.

Resize element 19 to 75%. paste below the wordart layer on the right, duplicate, mirror.
Resize element 62 to 75%, paste above the arrow shape bg, place at the upper right, duplicate, move down, duplicate, mirror, adjust on the left how you like, duplicate, move down.

Resize element 18 to 25%, being on the top layer, place on the left by the box of the tube, duplicate, mirror, move below the tube layer, adjust.

Resize element 54 to 75%, place on the left below the leaf layer.
Resize element 10 to 75%, free rotate to the left, move below the leaf layer on the left, duplicate, mirror.
Paste element 53 under the tube layer at the bottom.
Paste element 61 at the bottom also below the tube layer.
Paste element 51 below the leaf layers on the right side.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Enjoying Autumn

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

The tube is called Lucy.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Verymany  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Awesome Autumn by Elves of Rosegarden  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 128_Mask 4  HERE
Check out the rest of the blog HERE

 Font of Choice, I used Harlow Solid Italic

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 15, resize larger to 130%, apply your mask, delete, merge group.

Paste the bank element, mirror, move to the right more.

Resize your tube to 50%, place on the bank bench.

Paste the fahrrad behind the bench, mirror, move to the left more.

Paste the band under the bench and adjust to your liking.

Paste blaetter 2 under the bench, duplicate, mirror.

Paste the laubhaufen just above the mask layer at the bottom.

Paste the graeser 2 below the bicycle layer, duplicate a couple of times and move where you like.
Paste graeser 1, move how you like, duplicate, mirror.

Resize the strolballen to 75%, paste below the bicycle layer on the right.

Resize the fushs to 50%, place on the left by the tube layer.

Resize the amsel to 15%, place on the top of the bench.

Resize the schluessel to 15%, paste on the handle bar of the bicycle, erase some of the ring.

Paste the deko7 on the mask layer, duplicate, mirror, move how you like.

Resize pilz to 40%, place below the bicycle layer on one side, duplicate, move to the other side.

Resize the kuerbis to 25%, place below the fox layer on the left.

Resize blume 1 and 2 to 25%, place them where you like.

Resize zweig 2 to 25%, paste where you like at the bottom, duplicate two or three times, moving where you like.

Resize the beeren to 25%, place below the bench layer at the bottom, duplicate, mirror, adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Autumn Feather Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Verymany.

The tube is called Autumn.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Verymany  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Colorful Autumn by Elves of Rosegarden  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 128_Mask 4  HERE
Check out the rest of the blog HERE
Filter
Mura Meister Copies-Encircle
 Font of Choice, I used Hector le Dragon

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 8, resize larger to 130%, apply your mask, delete, merge group.

Resize frame 3 to 90%, free rotate to the right at 90, click inside your frame with your magic wand, expand by 5, paste paper, invert, delete, mirror your close up tube, paste, delete, select none, change the blend mode to screen, duplicate and merge down.
Duplicate the frame, change the blend mode to burn.

Resize element 42 to 55%, paste above the mask layer, apply Mura Meister Copies-Encircle.

Resize your tube to 90%, place on the right side.

Resize element 32 to 30%, place above the tube layer about center, duplicate, move below the tube and to the right, duplicate, move over a bit, duplicate again, mirror.

Resize element 49 to 55%, paste on the left below the flower.

Resize element 21 to 25%, paste by the pumpkin, duplicate, move over to the right by the leg.

Resize element 33 to 50%, place on the left side below the flowers.

Paste element 10 below the tube layer and adjust to your liking.

Resize element 44 to 50%, mirror,  place above the birdhouse on the left.

Resize element 28 to 90%, paste on the right above the mask layer, duplicate, mirror.

Resize element 20 to 25%,  duplicate two more times and place on each side below the flower layer.

Resize element 46 to 40%, place on the left side on the frame, duplicate, move up, duplicate, mirror.

Resize element 11 to 40%, paste behind the tube layer at the top right duplicate, mirror.

Resize element 29 to 20%, mirror, place on the left by the pumpkin.

Resize element 15 to 15%, mirror, place at the upper left, duplicate, mirror, place on the right where you like.

Resize element 25 to 25%, place at the top of the frame under the branches and bird.

Resize 54 to 30%, place on the frame at the top.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Halloween Witch

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Eugene Rzhevskii.

The tube is called Witch_Jane.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Template 64 by Drama Bomb  HERE
Check out the rest of the blog  HERE
Scrap Something Wicked by Melissaz Creationz HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE

Filters
Xero-Fritillary

 Font of Choice, I used Devil East

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original.
Go to Image, Canvas size 800 x 800 or a size you prefer, delete the credits.

Paste paper 9 on the bottom layer, apply your mask, delete, merge group.
Resize your mask larger to fit your tag.

Select layer 14, the orange wordart, select all, float, defloat, paste paper 7, invert, delete, delete the orange wordart also.
Then Go to Effect, 3D Effects,  Inner Bevel and apply with these settings
Shape 2, width 2
3, 8, 0, 10
315, 50, 30
color white
On layer 16, wordart witch, select all, float, defloat, new raster layer, fill with #80c83c, delete the orange wordart also, merge the black down and move this wordart out more.

Paste your tube on the top layer, mirror, resize to 50%, place how you like it.

Select layer 12, paste paper 5, invert, delete, delete the template also.
Paste the same paper #5 on layer 1 and 3 of the template.
Layer 10 apply the Xero filter-Fritillary with these settings,
5, 30, 10, 20

Resize element 16 to 70%, place under your tube layer at the bottom.

Resize element 10 to 70%, paste on the right above the tube layer by her shoe.

Paste element 33 by the books at the bottom.

Resize element 22 to 55%, place on the books.

Resize element 34 to 55%, mirror, place on the pumpkin of the tube, duplicate, mirror, place where you like.

Resize the bottles of poison to 55%, place by the books how you like.

Paste element 17 on the center circle where you did the fritillary filter.

Paste element 19 at the bottom just above the mask layer, duplicate, mirror.

Paste element 11 on the right below the book layers.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Autumn Kiss

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alehandra Vanhek.

The tube is called Sue.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Shabby Autumn  Add On by Manipulated by Magik  HERE
Check out the rest of the blog  HERE
Rachel Designs Mask Set 118_Mask 1  HERE
Check out the rest of the blog HERE
Filter
Xero-Artworx

 Font of Choice, I used Gentleman on the Rainbow size at 135

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 12, apply your mask, delete, merge group.

Paste frame 4, move to the right more, click inside with your magic wand, expand by 5,
paste paper 2, invert, delete, move below the frame, now paste your close up, delete, select none,
mirror your tube and adjust.
Duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to hard light.
Apply the Xero filter, Artworx, merge down.
Click on the darker brown of the frame with your magic wand, add noise at 35%.

Resize your tube to 45%, paste on the left on the frame layer.

Paste the leaf pile below your tube on the left, duplicate twice, move one to the center and the other one to the right side.

Resize the hay bales to 75%,  place on the left above the tube layer.

Resize the wheel barrel to 75%, mirror, place below the tube layer about center.
Paste the stalk on one side below the leaf layers, duplicate, mirror and adjust behind your tube layer, duplicate again and move up how you like behind the tube.

Resize the burlap sack to 50%, place in front of the hay bales.
Resize the apple bucket to 50%, place on the right above the hay bales layers.
Resize the bearded titmouse to 35%, mirror, place on the hay bales on the rope.
Resize the apply cider to 40%, place by the burlap bag.
Resize the cupcake to 25%, place on the hay bales.
Resize the cup of cider to 25%, place by the cupcake.
Resize scarecrow2 to 75%, free rotate to the right at 10 degrees and place
below the apple basket layer on the right.

Paste flower 2 just above the mask layer at the left bottom side, duplicate, mirror, duplicate, move up some, duplicate again and mirror.
Now duplicate the stalk behind the tube and raise up higher and move it below the flower layer,
duplicate, mirror.

Paste the leaf scatter on the top layer at the bottom, duplicate, flip, move below the tube layer at the top and adjust on the frame how you like.
Resize the berry branch to 75%, place below the scarecrow layer on the right, duplicate, move up, duplicate, mirror, adjust behind your tube the way you like.

Resize the lips to 20%, free rotate to the right at 15 and place at the top on the frame, sharpen once.
Resize the mushroom to 35%, place on the right below the leaf layers, duplicate, mirror, adjust behind the tube.

Resize the butterfly to 20%, free rotate to the right at 20, duplicate, place where you like.

Paste the ribbon at the bottom between the leaf layers.

Resize the charm to 65%, place on the upper right on the frame.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Back 2 School Again

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art at CDO HERE

Supplies Needed

I used PSPX...but any of them should work.

Time 4 School by Manipulated by Magik  HERE
You can check out her blog HERE
Template 241 by Becky- Simple Expressions (Scroll Down)  HERE
Check out the rest of her blog also HERE
WSL_Mask 84  HERE

Filters
Xero-Porcelain

Font of Choice, I used Blacksword

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original,
delete the credits.
Select rectangle 2, paste paper 2, invert, delete, select none, delete the template layer also.
Select reactangle 1, paste paper 7, invert, delete, select none, delete the template layer.
On the Slate frame go to Effects,  3D Effects, Inner Bevel with these settings
Bevel Shape 2,  width 2,
3, 6, 0, 10
315, 50, 30
Color White
Paste paper 7, apply your mask, delete, adjust to fit your tag later.

Paste the locker element below the last layer of the template.

Paste your full tube, being on the top layer, mirror and adjust to your liking.
Click on the circle fill with your magic wand, expand by 5, paste paper 1, invert, delete, then paste  your close up, move where you like, then delete, select none.
Apply the xero filter, Porcelain to the close up.

Apply the same bevel effects to the circle trim and circle frame. Add noise at 35%, on the circle frame.
Resize the laptop to 50%, place by the feet of the tube on the right.
Resize the composition book to 50%, place on the right below the laptop, free rotate to the right at 25 degrees.
Resize the globe to 65%, place on the left side, being on the top layer.
Paste the books on the left below the globe layer, duplicate, move over to the right.
Resize the calculator to 25%, place by the globe.
Resize the backpack to 50%, place on the left below the tube layer.
Resize the eraser to 20%, place on the left where you like.
Resize the crayon to 50%, free rotate to the left at 90, place below the tube layer.
Resize the marker to 40%, free rotate to the left, place by the crayon.
Resize the pen to 30%, mirror, place by the laptop.
Paste the sparkles below the tube layer and adjust to your liking.

Add a fat white gradient glow on the wordart  Gotta Go Back To...

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.