Secret Admirer

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Sue Miller .

You need a license to use this art work. Please do not use without a license.

 You can find this art at The PSP Project aka TPP  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap - Red Hot Lover by Dee Designs  HERE
Millie's PSP Madness Mask 54  HERE
No Filters used
Font aka Dora
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800

Paste paper 2, apply your mask, delete and merge group.

Paste frame 5, move up and over to the left some duplicate and move down and to the right some.
Paste your tube to help place them better
and then merge your frames together.
Click inside the frames, expand by 5 paste paper 1, invert, delete.
Do not deselect yet, mirror your tube first, then paste and delete, select none and change the blend mode to screen. Duplicate, mirror and place in the other frame, erase the parts showing outside the frame.

Duplicate the frame, change the blend mode to hard light on the top frame, then merge down.

Resize element 14 to 60% and place on the left bottom side below the tube layer.
Resize the fan to 60% and place on the right side below the tube.
Resize element 1 to 45%, place on the right.

Paste element 26, free rotate to the right, move to the left on the edge of the frame.
Duplicate, mirror, resize to 75%, move down on the frame on the right side.

Resize element 9 to 65%, place on the left just above the frame layer.
If using the same tube I am, I pasted element 22 on the edge of the tube and erase some from the left side and moved the shoes above the lace layer.
Resize element 18 to 50%, place on the left side, below the large flower, duplicate, mirror, free rotate to the right and adjust.
Paste Spray 2 on your tube.
Paste element 21, mirror, move to the top right and to the bottom layer, duplicate, mirror and let a little show on the left side, duplicate, flip, mirror and let a little show past the shoes.
Resize element 15 to 50% place on the ribbon, duplicate, move over some, duplicate, mirror, duplicate and move over some.
Resize element 3 to 50%, place on the left, free rotate at 15 to the left.
Resize element 7b to 50%, duplicate and place on the frames how you like.
Resize element 20 to 30%, duplicate and place at the bottom in the center.
Resize element 11 to 30%, duplicate a couple of times and place where you like.

Use one of the wordart in the kit or write what you would like.
I wrote Secret Admirer after the name for the tube.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.
 

Love Needs No Words

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Sue Miller .

You need a license to use this art work. Please do not use without a license.

 You can find this art at The PSP Project aka TPP  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Template #2 by Biene at Creative Misfits Creations HERE
Scrap - It Must Be Love by Kittz Kreationz  HERE
Monti Blind Mask (Click on Extras to get mask) HERE
Filters used
Xero Filter-Alien Mist, Soft Vignette and Clarity
EyeCandy4000-Gradient
Font Alex Brush
 

Drop Shadow usually V2 H2 50 black

Open the template, hold the shift key and hit the letter D to duplicate and close the original.
Delete the credits.
Move the wordart to the side for now.

Select the black circle of the template, float, defloat, resize your tube first to 90%, then paste, having the bottom part at the edge of the circle and the edge of the tube on the right side of the circle,  duplicate, then being on the bottom tube, delete, select none. Back on the top tube and erase the edges on the bottom and side you don't want.
Apply the Xero Filter-Alien Mist with these settings to both tubes.
235, 90
255, 255, 255
Then apply Soft Vignette on both tubes
Elliptical, Foreground color, Diagonal Dots
0, 0, 0, 255
Then merge tubes, apply Xero Filter Clarity.

Move your wordart to the left and place how you like it. Change the color to what you would like. I used my change to target brush on just the word, then selected all, expanded by 2, add a new raster layer, move below and fill with white.
Back on the top wordart, add EyeCandy4000 glass, color white with these settings
Bevel width 29.85
75, 30, 35, 50, 0, 50
Lighting is 135, 45
Bevel profile is Subtle Button

Paste element 65% at the top of the black circle behind your tube.

Paste element 17, resize to 80% and place on the right side.
Resize the cupcake to 65% and place behind the gift box on the right.
Resize element 25 to 90% and place on the left side below the gift box, duplicate, resize to 90%, mirror and adjust, then duplicate again, move below the black circle layer and just have a small part of it showing.

Resize element 22 to 40%, duplicate, mirror and place them both how you prefer.

Select the heart, apply the EyeCandy4000 glass to it but change the lighting to 93, 70 or one you prefer, and also apply to the small hearts on the black circle.

Apply noise at 50% on the mask hearts.

I added a gradient glow of white on the heart at width of 3, soft corners at 25 and opacity at 100. Then I added my drop shadow and applied the gradient again.
Add a fat red gradient on your black circle.

Paste element 12, resize to 40% and place by the gift box.

Now paste paper 1, resize to 85%, apply your mask, delete, merge group and move to the bottom below the heart mask layer.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut. 

Be Mine 3 Piece Set

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.

 You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Loveable Red Valentine by Sweet As Honey Creationz HERE
Monti Blinds Mask 1(Click on Extras to get mask)  HERE

Filters
Mura Meister Copies
AAAFrames-Foto Frame
Font I used was Fiolex Girls

Drop Shadow I used was  V-3 H-3 65, 5  black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.

Paste paper 7 and apply your mask, delete and merge group.

Heart Frame 2 resize to 90%, click inside with your magic wand, expand by 5 and paste paper of choice, I used paper 1 and resized it to 70%, invert, delete, select none. Click on the red stripes of the paper and add noise at 50%, select none.

Resize your tube to 40% and place about center on the top layer.
Resize Hanging hearts to 45%, place on the left side, moving it below the tube layer.
Resize the Love potion to 50%, place on the right side
Resize the perfume bottle to 45% and place by the potion bottle.
Resize Coffee1 to 50% and place on the right side.

Paste Deco1 below your tube layer.
Taking the Deco1 again and take your free hand took, draw around one side, cope and paste, then apply the Mura Meister Copies-Encircle, move below the paper layer of the frame. Resize it larger to 105%.

Resize the heart cupcake to 45% and place on the left side.
Resize the bear to 45% and place by the cupcake.
Resize bow 2 to 35% and place on the potion bottle on the right.
Resize the winged heart to 50% and place on the upper right side of the frame.
Add any other elements you would like.
Do not merge yet if you are going to do the Signature and Avator.

Signature
Open a new layer 600 x 250, paste paper 7.
Back on your tag, close off your tube and the elements except for the hanging heart and frame and paper layer.
Copy merged the hanging heart, frame and paper layer and paste on your new image and adjust to your liking.

Back to your tag, open all the layers, copy your tube and paste.

Copy the cupcake and resize to 50% and place on the left side.
Copy and paste the teddy bear, resize to 50% and place on the left by your tube.

Copy and paste the Potion bottle, resize that to 65% and place on the right side.
Resize the bow to 60% and place on the potion bottle.
Paste the perfume and resize to 60% and place by the potion.
Paste the coffee cup and resize to 60% and place on the right side of your tube.
Paste the wingerd heart on the upper right.

Paste Deco1 below your tube layer and move to one side how you like then duplicate and adjust on the other side.
If happy with it all, merge visible and add your frame and copyright and name to this.
I added AAAFrames-Foto Frame width at 4 and all other numbers left as is.

Avator
Size of choice, depending on your group or forum size allowed.
I did this one 175 x 200
Fill with a red color first.
Go back to your main tag, close off your tube layer, copy merged and paste on the new image, resize to 85%, moving it to the right until the hearts are showing how you like.
Paste your tube from your tag, resize to 60% and place on the left side of the hearts and adjust.
Once happy, merge visible, add the same frame as before.
Add your copyright and name and merge.

Then go back to your main tag, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Happy New Year 2

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Lysisange .

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Holiday Dreams by SassyDede  HERE
Check out here blog HERE
Monti Blind Mask (Click on Extras to get mask)   HERE
Filters
Mura Meister-Copies
AAA- Foto-Frame
Font akaDora
 

Drop Shadow usually V2 H2 50 black

New image a size you prefer,  as usual mine is 800 x 800.
Paste paper 6, apply your mask, delete and merge group.
Paste the Clock, resize to 85%.
Take your free hand tool and draw around the orange circle of the clock or go to your preset and select circle, background set at null, line with 2 and draw a circle around the orange part, past your close up tube on one side, invert, delete.
Mirror your tube before pasting again and place a bit lower than the first one, delete and select none, change the opacity on both to about 20 or what you like and merge down with the clock.

Element 03, take your free hand tool, draw around the beads until you have gone completely around them, not getting the larger ornaments, copy and paste on your new tag, flip, you might have to get rid of some shading still first, then resize to 65%, duplicate to use later under your tube, then apply Mura Meister Copies-Encircle, move below the clock layer.

Resize element 3 to 65%, place on the left side.

Resize element 58 to 50% and place off to the right.

Resize your tube to 43% and place on the right below the champagne bottle layer.

Resize element 2 to 50%, place just below the champagne bottle layer and erase the ornaments showing.

Resize element 11 to 40%, flip, place on the right side below your tube layer.

Resize element 18 to 30%, place on the left side by the package.

Select your preset on circle, background set at null, draw a circle around the white circle on the clock, line width at 2, then add a new raster layer, holding your mouse over the circle you drew, making sure the letter A with a little half circle is showing on the bottom and type out what you would like yours to say. I wrote out Happy New Year using akaDora font and color #723620.
Convert to a raster layer, then delete the circle layer you drew.

Apply EyeCandy 4000-Glass with these settings
Bevel 1.67
Smoothness 75
30, 35, 50, 0, 50
Color white
Lightning I used was
Direction 65,  Inclination 76
Highlight Brightness100,  Highlight Size 40
Ripple thickness 0,  Ripple Width 11.16

Now select your wordart, float, defloat, add a new layer, fill with white, move below.
Paste element 13 below the mask layer, resize to 95%, mirror and adjust.
Add any other elements that you would like.

If going to do the Signature tag and Avator then do not merge together just yet.

Signature tag
Open a 600 x 250
Paste paper 6, then crop your tag.
Take the bottom 6 layers of your tag and paste one at a time, resize the greenery to 95%, copy the clock, resize to 90% and move down just a bit.

Paste your original tube and resize if you like, I just resize mine very little and placed on the right side.
Back to your tag, copy the papers below your tube layer and resize to 75% and place below your tube layer on the signature tag.
Back to the tag, copy the gift box and resize to 70%, place on the left side below the tube layer and erase the little holly by the clock hands.
Back to the tag, copy and paste the champagne bottle and resize to 50% and place.
Copy the little kitten and resize to 50% and place on the left in front of the gift box.
Champagne glasses resize to 50%, mirror and place to the right behind your tube layer.
If happy with it all, merge visible and add a frame of choice.
I used AAA Foto Frame, width at 4, Opacity at 35 and used
Transparent Orange from the drop down. You will see default first, click on that and you will get a selection of other colors.
Add your copyright and any saying and name now on this one.
Apply the glass and white background for the saying and name as before.

For Avator, size whatever is allowed in your group or forum.
I used 175 x 200
Paste paper 6, crop your tag, go to your tag, copy the clock, paste and resize to 40%.
Resize the gift box to 40%, place on the left, erase the holly,  resize the champagne bottle to 30% and place more in the center.
Resize the papers layer to 35% and place on the right side below the champagne bottle layer.
Resize the kitten to 35% and place on the left side being on the top layer.
Once happy, merge visible and add the same frame as before.
Add your copyright and name or initial.
Now go back to your original tag and close off any background you used and merge visible.
Resize first, then add your Copyrights and name and that's it.

Hope you enjoyed doing this tut.