Autumn Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

The tube is called Sweater Attitude

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Harvest of Blessings by Horseplay Pasture's Designs  HERE
3rd one down
DD Mask 2nd one down   HERE
Be sure to check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle
Xero-Soft Mood, Titanium, Clarity and Soft Vignette
 

Font of Choice, I used Galathea

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer working with.
I like lots of room, can resize later.

Paste paper 14, apply your mask, invert, delete.

Paste element 33, resize to 80%, free rotate to the left, click inside with your magic wand, expand by 5, paste paper of choice, I used paper 15, invert, delete, mirror your close up tube first, then paste, delete, select none.

Apply the Xero Filter-Soft Mood all numbers on 50 except the last 2 are on 0,
Titanium with Subtle checked and numbers 20, 50, 50, 127
and then Clarity, 128, 3, 50.
Merge tube down with the paper in the frame and then apply Soft Vignette with these settings
Elliptical, Foreground, Diagonal Dots all numbers on 0 except the last one is 255.

Paste your tube on the left above the frame layer, resize to 35% if using the same one I am.

Paste element 43 below the paper layer of the frame, move to the bottom, duplicate, flip, duplicate, free rotate to the left, move on the side, duplicate, mirror and adjust all to your liking.

Resize element 62 to 35%, paste just below the paper layer of the frame, apply Mura Meister Copies-Encircle, change the first number to 25, take your pick tool to adjust to fit how you like.

Resize element 51 to 75%, paste below the tube on the lower right, duplicate, move up behind the tube head and move to just above the mask layer.

Resize element 46 to 60%, place at the top on the frame.
Resize element 40 to 50%, place on the left.
Resize element 56 to 40%, place on the left.
Resize element 57 to 70%, place on the left in front of the coffee pot.
Resize element 54 to 55%, place below the coffee pot on the left.
Resize element 18 to 55%, paste below the coffee pot layer and to the left, duplicate, move over to off center, then duplicate again, move above the flower on the right.

Resize element 11 to 45%, mirror first, then paste below the flower layer on the right behind the tube, duplicate, resize to 80%, and move toward the center more.

Paste element 61 at the bottom, just above the frame layer, duplicate, free rotate to the left, place on one side, duplicate, mirror.

Resize element 15 to 30%, free rotate to the left at 25, place at the top, duplicate a couple of times, mirror one and place them where you like.

Resize element 41 to 30%, place on the birdhouse on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Autumn Feeling

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  OglArt.

The tube is called Autumn Girl

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Autumn 2010 by AdryP Diseños  HERE
   DD Mask HERE 3rd one down or one you prefer

 Font of Choice, I used fancy Pens

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer working with.
I like lots of room, can resize later.

Paste paper 5,  apply your mask, delete, merge group.

Resize element 14 to 15%, place on the left side more, duplicate and move to the right more.
Paste element 22, resize to 22%, duplicate this several times, place one in front of the steps and two below the steps and up a little on each one.

Resize your tube to 55%, if using the same one I am, place on the steps on the left, below the first flower border.

Paste element 36, resize to 20%, place below the step layers, duplicate, mirror, then if you want to change the color go to, Adjust, Hue and Saturation, Colorize and use these numbers
Hue 14, Saturation 86
Duplicate the flower border and place behind the gates a couple of times, moving them up a little.
Resize element 6 to 10%, place on the gate on the right and move down a bit.

(This part with the book is optional, since my tube had a book already) 
Element 60, resize to 10%, if you want to recolor it go to Adjust again and change the last number to 130, free rotate to the left at 15.  Take your pick tool and place on the little square, hold the shift key and pull down and in on both sides until you get the book the way you would like, then place on the steps on the left below the first flower border.

Element 12, resize to 10%, free rotate to the left at 15 duplicate mirror paste just above the door layers.

Resize element 23 to 10%, place on one side on the gate, duplicate, mirror, duplicate again, move up, duplicate, mirror, duplicate again, resize to 70%, free rotate to the right at 90, place at the top, duplicate mirror, duplicate each one again and move more to the center.

Resize element 1 to 5%, duplicate several times and place on each side on the green leaves, resize one again to 75%, duplicate a couple of times and place where you like.

Element 45 resize to 20% place on the right.

Element 24 resize to 20% place at the top under the green leaves,  duplicate move down some, erase any part you don't want showing, duplicate a couple of times and mirror.

Resize any of the leaves you like to about 10% and duplicate a few times and place around.

Resize element 16 to 10%, recolor using the same settings as before, mirror and place on the steps below the tube layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Snowflake Dreams

This tut was written for those with a basic knowledge of psp.

I am using the beautiful tube, called Goddess of Winter by

Marta Sarmiento

 You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Navidad-09 by My Warehouse of Dreams HERE **Check out the rest of her blog** HERE
Template 709 by MPM HERE  **Check out the rest of her blog** HERE
WSL_Mask 84 HERE
and DD Mask 10 HERE  **Check out the rest of her blog** HERE

Font of Choice, I used Alex Brush

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit the letter d to duplicate, close the original, delete the credits and layer 5.
Go to Image, Canvas size, make it 800 x 800 or what you prefer.

Paste paper 1, apply WSL_Mask 84 first, delete and merge group, lower the opacity to 75.
Paste paper 1 again and apply DD Mask 10 next, delete, and merge group, flip and use your Pick tools to adjust the size to your tag on both mask layers.

Select layer 1 of the template, select all, float, defloat, paste paper 1, invert, delete, then go to Selections, Modify, Select Selection Borders and change the number to 5, add a new raster layer, fill with white, select none, add noise at 50%.

Layer 2, paste paper 2, move to have more of the white showing, then go to Effects, 3D Effects,  Inner bevel width on 2 and with these settings
8, 4, 4, 0
48, 36, 42
color white
Layer 3 of the template, add noise at 50%.

Layer 4, paste paper 1, invert, delete.
Layer 6, add noise at 50% or more if you like.
Layer 7, paste paper 2, again move the paper to get more white showing, invert, delete.
Merge layer 9 down with layer 8, change the color to by going to
Adjust, Hue and Saturation, colorize with these numbers
Hue 145, Saturation 165

Layer 10, add noise at 15%, add your drop shadow.
Add the same bevel setting to layer 11 as you used before.

Paste your tube on the left, resize to 75%, duplicate the tube, now select layer 2 that you filled, select all, float, defloat, invert, and being on the bottom tube, delete, select none. Now back on the top tube erase the parts outside the layer 2 area.
Resize element 16, place at the bottom part of your tag, with the branches under the wordart, refer to my tag.

Resize element 15 to 75%, place just above the mask layer toward the bottom of your tag.

Resize element 46 to 50%, paste between the two mask at the top right, sharpen more, once or twice, depending on what you like, duplicate, mirror, duplicate again, flip and adjust.

Resize snowflake 1a to 10%, place on one of the small squares, sharpen once and change your drop shadow color to one that matches your tube, duplicate and move over to the left in the other square. Duplicate them as many times as you like and place where you like, resizing a little again if you like. Remember to sharpen if you resize.

Resize element 38 to 15%, place at the bottom below the branch/roping looking element on the right, duplicate mirror, bring back toward the center a bit.

Resize element 55 to 15%, free rotate to the left at 90, place below the ribbon layer at the bottom on the left side, duplicate, mirror and adjust how you like, duplicate again, flip, move down below the branch layer.

Resize element 53 to 15%, free rotate to the left at 90, place above the tube layer on one side, duplicate, mirror.

Resize element 44 to 15%, place a little off center on the blue square.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Hope for A Cure



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Hope

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
 Scrap BCA by Scrappin Krazy  at CMC HERE

Template 137 by Punky Butts HERE

Check out the rest of the blog HERE

WSL_Mask 84 HERE

Filters
Xero-Radiance and Soft Vignette
 

Font of Choice, I used Vani

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original, delete the credits.
Go to Image, having all layers checked, resize to 90%, then go to Image, Canvas size, 800 x 800.

Paste paper 4, apply your mask, delete and merge group.

On rectangle and rectangle 3, paste paper 1, invert, delete, select none, delete the template layers also.
Rectangle 2 paste paper 4, invert, delete.
On each of the white frames, go to Adjust, Add/Remove Noise-Add Noise at 50%, uniform with monochrome checked.

Circle layer, paste paper 4, invert, delete.

Small circle, select all, float, defloat, add your middle size tube, place how you like, invert, delete, select none. Apply the Xero filter-Radiance at default settings,
then apply Soft Vignette with these settings
Elliptical, Foreground color, Diagonal Dots, repeat 1, 0, 0, 255

Being on the top layer, paste your tube on the right side, resize to 87%.

Circle frame 1 add the noise as before.
Circle frame 2 paste paper 3, invert, delete.

Film backing, select all, mirror your smaller tube first, paste how you like in the first square on the left, invert, delete, then paste the tube again with the ribbon part showing in the next square, move below the first one, delete, select none. Duplicate the first tube in the first square, mirror and place in the third square.

Film strip, paste paper 3, invert, delete.
Film frame add noise as before.

Paste element 22 at the top, below the tube layer.

Resize element 5 to 85%, mirror, place on the left side.

Resize element 18 to 50%, mirror, place by the cup.
Paste element 27, free rotate to the right at 90, move below the cup layer, and cover the edges of the legs on the tube, erasing any part of the legs showing below.

Paste element 12 where you would like. I duplicate this a few times and placed on the mask layer also.

Resize element 30 to 50%, place on the flower at the upper left.

Paste element 13 above the rectangles and place one at the upper right, duplicate, move to the bottom more in the center. 

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.