Indian Maiden

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Souldesigner.

The tube is called Indian Girl.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  All My Relations by Sarahs Tags N Things  HERE
Check out the rest of the blog HERE
WSL_116 Mask  HERE

Font of Choice, I used Tribal Times

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Resize paper 1 larger to 120%, apply your mask, delete, merge group.
Always adjust your mask to fit your tag when done.

Paste frame 2, click inside with your magic wand, expand by 5, paste paper 8, invert, delete, select none, duplicate the paper, change the blend mode to burn, merge paper layer down with the first paper.

Paste tree 2 on the left, duplicate, mirror, duplicate, move toward the center more, duplicate, mirror, adjust the trees to your liking.
Paste the element tree on the mask layer, duplicate, mirror, adjust.

Resize your tube to 40%, place in the center below the frame, duplicate, move to the top layer, erasing the part at the bottom you do not want showing.

Paste the teepee on the top layer on the left, resize to 90%.
Resize border 1 to 90%, place on the frame at the bottom, duplicate, move to the top on the frame.

Resize the rock to 25%, duplicate a couple of times and place where you like.
Resize the grass to 75%, duplicate a couple of times and place below the rock layer and the teepee layer where you like.
Duplicate one of the rocks and resize smaller to 75%, place by the other rocks as many times as you prefer.

Resize the quiver to 55%, free rotate to the left at 45 degree and place by the rocks on the right.
Resize the hat to 30%, place where you  like.
Resize the drum to 45%, place by the quiver.
Resize the drum stick to 45%, place by the drum.

Place flowers 1 and 2 below the rock layers and place them how you like, duplicating once or twice also, erasing any parts you do not want.

Resize the kokopelli to 30%, place on the teepee.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Spring Beauty

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Verymany.

The tube is called Laurel.

You need a license to use this art work. 

 Please do not use without a license.

You can find this art HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Scrap Florality by ChiChi Designz  HERE
You can check out her blog HERE
Trese Mask 0113, 3rd one down HERE
 

Font of Choice, I used Before the Rain

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete, merge group.
Resize frame 1 to 90%, paste, click inside with your magic wand, expand by 5, paste paper 12, invert, delete, select none.

Paste frame 2 below the paper layer of the first frame, resize to 90%, duplicate, mirror, move down some on the right.

Paste grass 1 at the bottom on the top frame, duplicate, mirror, adjust.

Paste the fence below the grass layers.

Paste the plant on the left side, resize to 85%, duplicate, mirror.
Resize flower 2 to 75%, place on the right side, duplicate, mirror.
Paste flower 1 on the left, duplicate, mirror.

Resize the flowers to 85%, place on the grass layer in the center.
Resize flower 3 to 80%, free rotate to the left at 30 degrees, paste on the left side, duplicate, mirror.

Resize your tube to 60%, place in the center on the top layer, duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down.

Paste the Swirl sparkles just below the tube layer, duplicate, mirror.

Paste the flower trail on the frame layer, duplicate, mirror.

Resize the bird to 25%, mirror and place at the upper right.

Resize the butterfly to 25%, duplicate, mirror and place them where you prefer.
Duplicate the one on the left, resize to 70%, move up to the top more.

Resize the egg to 25%, place on the left below the tube layer by the leg.
Resize the chick to 25%, place it by the egg, duplicate and move to the right below the tube layer.
Resize the dandelions to 50%, place on the fence layer, on one side, duplicate, mirror, adjust.
Paste the flower brush on the left side below the swirl sparkle layer.

Paste the bubble trail below the tube layer at the bottom, duplicate, flip and adjust at the top.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Smile Often

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

The tube is called Captivating.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Life In Full Bloom by DigiTee Designs  HERE
Check out the rest of the blog  HERE
 Trese Mask 0113, 3rd one down HERE
Filters
EyeCandy 4000-Bevel Boss & Gradient Glow
Mura Meister Copies-Encircle

  Font of Choice, I used Jenna Sue

Drop Shadow usually V2 H2 50 black

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Resize paper pink circle dots to 23%, paste, apply your mask, delete and merge group.
Paste the scalloped frame, resize to 45%, free rotate to the left at 45 degrees,
select all, float, defloat, resize paper watercolor roses to 23%, paste, invert, delete, select none, delete the original frame.
Apply EyeCandy 4000 Bevel Boss with these settings
Bevel width 5.76
Bevel Height 50
Smoothness 75
Inside marquee checked, Shade interior checked also
Lighting
190, 69
Brightness 100, Highlight size 25
Bevel Profile is set on Button, then click ok.
Click inside the frame with your magic wand, expand by 5, resize canvas paper, ligt coral to 23%, paste, invert, delete, mirror your close up tube first, then paste where you like, delete, select none.
Duplicate your close up, go to Adjust, Blur, Gaussian Blur, number on 4, change the blend mode to hard light or one you prefer, merge down.

Paste your medium size tube on the left side on the frame layer.

Resize the flower cluster sticker to 45%, place at the bottom of the frame, above the tube layer, moving to the right a bit.

Resize the rose cluster sticker to 30%, paste on the left side below the first flower layer, duplicate, mirror, adjust.

Resize the flower pot sticker to 50%, mirror, paste on the right side below the flower layers, adjust, duplicate, resize to 70%, mirror, place in front of the first flower pot, duplicate again, move to the left below your tube layer.

Resize the leafy branch to 25%, free rotate to the right at 45 degrees, move below the flower pot layer, and to the right a bit, duplicate, mirror.

Pick the wordart of choice, I used Smile often and resized it to 75%, place at the bottom and apply a fat white gradient glow, using EyeCandy 4000, gradient glow, width at 3.

Resize the light coral butterfly to 30%, place toward the bottom by the flowers, duplicate, mirror.
Resize the little mint butterfly to 15%, duplicate twice, paste where you like.

Resize the light coral large flower to 35%, apply Mura Meister Copies-Encircle with the first number on 12, paste above the mask layer and adjust to fit your tag.
Resize the chipboard border doodle to 75%, place just above the flower circle at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Believe in Fairies

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Elias Chatzoudis.

The tube is called Fairy Jasmine

You need a license to use this art work. Please do not use without a license.
 

 You can find his art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Believe in Fairies by Melissaz Creationz  HERE
Check out the rest of the blog HERE
Dee Mask DD_NFM_2015_4 HERE
Check out the rest of the blog HERE
Animation 299 by Scrappy Bit of Fun-Simone HERE
Check out the rest of the blog HERE

Font of Choice, I used Mala TestaN

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete, merge group, enlarge your mask to 110%.

Resize element 7 to 40%, move toward the bottom.

Paste element 12 on the grass more to the left side.

Paste element 15 on the left, below the house layer, duplicate, resize to 55%, move down and to the left more.

Paste element 17 on the right side below the house layer, duplicate, resize to 55%, move down and to the right a bit more, duplicate again and move to the left more.

Paste element 35 on the house layer, resize larger to 110%.

Paste your tube, mirror and place on the right or where you prefer.

Resize element 27 to 50%, place where you like, I placed mine by the hand of the tube layer.

Resize element 32 to 50%, place on the grass on the left side.

Paste element 11 on the mask layer,  adjust how you like it.

Resize element 34 to 85%, paste below the pink mushroom at the top.

Resize element 23 to 40%, place on the upper right side.

Resize element 3 to 40%, paste behind your tube on the right.

Resize element 10 to 25%, mirror, place on the top layer.

Resize element 21 to 65%, mirror, place on the upper left by the mushroom.
Resize element 20 to 65%, mirror, place on the lower right side above the tube layer.

Add any other elements you would like, make it your own.

If you are going to do the animation then merge with your white background.
 

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

Take to animation and make 20 frames, same as the animation.
On the animation, go to edit, copy all, then click on your tag, go to edit, paste into selected frame where you like, if you want to have more than one, then click paste into selected frame again.
Test and if happy save.
 

That's it

Hope you enjoyed doing my tut.