St Patty Faery

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap 50 Shades of Shamrocks by Tasha's Playground  HERE
Check out the rest of the blog HERE
Mask 27 by Angie Tagged Me HERE
Check out the rest of the blog HERE
 

 Font of Choice, I used leaf 1

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

This is a quickie one

Open a new image 800 x 800 or one you prefer, paste paper 3,  resize your mask down to 85%, apply, delete and merge group.

Paste the scatters on the mask layer.

Paste the tree on the left side.
Paste the stairs in front of the tree.
Paste the grass in front of the stairs, move over some duplicate, mirror.

Resize your tube to 45%, place on the right side below one of the grass layers.
Paste flower 4 below the stairs on the left, duplicate, resize to 75%, move above the stairs on the left, duplicate, mirror, duplicate one of the flowers again, resize to 75%, place above the tube layer by the legs, erasing some of the stems.

Resize the hat to 50%, place on the grass on the left.
Resize the butterfly to 50%, mirror and move back to the left or place where you prefer.
Paste the mirror on the left side below the first flowers, take your free hand tool, draw around the mirror, resize your tube to 25%, mirror, paste, delete, select none, change the blend mode to overlay.

Resize coins to 25%, place on the right, duplicate and move over a bit.

Paste the sparkles a couple of times being on the top layer.

Resize shamrock #2 to 25%, duplicate once or twice and place on the grass where you like.

Resize scatter 2 to 40%, paste on the grass, below the hat, duplicate, mirror, move below the flower layer by the tube.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Cute Enough to Kiss



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Barbara Jensen.

The tube is called Budding Beauty, this is one of her Retired tubes #42.

You need a license to use this art work. Please do not use without a license.
 

 You can find her art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  XOXO by Lorenzen Design  HERE
Check out the rest of the blog HERE
Mask WSL_84  HERE
Filters
EyeCandy4000-Chrome-Gradient Glow
Screen Works-Light Gauze

Font of Choice, I used Close to You

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 23, apply your mask, delete and merge group.

Paste frame 6, apply EyeCandy 4000-Chrome with these settings
Reflection Map-Outdoor.tif
16.65, 25, 50 ,0, 72
Inside marquee checked
Lighting 135, 45
Highlight brightness and size-100, 40
Go to Adjust, Hue and Saturation, colorize
Hue 57, Saturation 48
Then apply a fat white gradient glow 3, 25, 100
Click inside with your magic wand, expand by 5, paste paper 1, invert, delete, move below the frame. 
Then paste your tube, delete, select none, duplicate, mirror.

Paste your tube on top of the frame in the center so you can adjust the others better, erase some of the legs at the bottom.
Merge the tubes in the frame now, duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to screen, apply the Screen Works filter-Light Gauze, merge down.
Resize rose 1 to 35%, paste at the bottom of the tube, duplicate, mirror, duplicate, resize to 75%, move over some and below the first rose layer, duplicate, mirror.
Duplicate again, resize to 75%, move down, duplicate and mirror.

Resize leaf 3 to 35%, paste below the roses, duplicate, mirror, duplicate the one on the right, free rotate to the left at 90, resize to 75%, place on the left side below the other leaf layer, duplicate, mirror.

Being on the top layer, paste Butterfly 1, free rotate to the right at 35, resize the butterflies to 35%, place on one side, duplicate, mirror.

Resize rose 3 to 40%, paste on the right below the greenery, duplicate, mirror.

Resize doodle 2 to 35%, paste below the paper layer of the frame on the upper right, duplicate, mirror, duplicate, flip, duplicate, mirror.
Paste doodle 3 on the mask layer, adjust, erase the part on the right that sticks way out, duplicate, mirror, flip, adjust.
Resize flower 3 to 25%, paste at the top of the frame by the doodles below the tube layer, duplicate, mirror.
Resize flower 4 to 20%, paste offset on flower 3, duplicate, mirror.
Paste wordart 9 on top of the flower layers, add a fat white gradient glow.

Resize the bee to 35%, paste on the right side, apply a fat green gradient glow, duplicate, resize to 75%, mirror and move up just a bit.
Resize the perfume bottle to 35%, place below the bee layer on the right.

Resize the heart string to 85%, free rotate to the left, place below the greenery at the bottom.

Resize lips 3 to 20%, free rotate to the left at 20, paste on the left side on the flowers.
Resize hearts 2 to 85%, paste below the greenery at the bottom.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

So Lucky

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.

The tube is called lucky

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap  Feeling Lucky by Manipulated By Magik  HERE
Check out the rest of the blog HERE
Mask WSL_84  HERE
Filters
penta.com-Dot and Cross
xero-Porcelain
Unplugged Tools-Interlace
EyeCandy4000-Gradient Glow

Font of Choice, I used Celtic

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 4 or one of choice, apply your mask, delete and merge group.
Paste frame 5, resize to 90%, free rotate to the left at 10, duplicate, mirror, move both frames, one to the left, the other to the right until they are how you like them, then merge down.
Duplicate the frame, change the blend mode to Burn, merge down, then apply the filter
penta.com-Dot and Cross
72, 10, 2
Select your magic wand, click inside the frames, expand by 5, paste paper 2, invert delete, move below the frame.
Resize your tube to 40%, paste on the right frame, mirror the original tube and paste in the left frame, delete both, select none, merge down.
Duplicate the tubes in the frame, Gaussian blur at 4, change the blend mode to Screen.
Apply the xero filter-Porcelain and then
Unplugged Tools-Interlace with these setting 4, 24, 2, 4

Resize your tube to 33%, paste in the center on top of the frame layer.

Paste the paint splatter on the mask layer at one side, duplicate, flip, duplicate, mirror, duplicate flip and adjust all to fit your tag better.

Paste the glitter layer under your tube layer, duplicate, mirror.

Resize the mouse to 50%, mirror, paste above your tube layer on the right.
Resize the balloons to 50%, place below the mouse and make it look like he is holding them by the hand.

Resize the coin to 30%, place under the mouse, duplicate twice and move below the tube layer and one off to the right more and the other to the left more.

Resize the word lucky to 70%, paste at the bottom, apply the penta.com-Dot and Cross and then add a fat white gradient glow with EyeCandy 4000-Gradient Glow

Paste the sparkle above the paint splatters, duplicate, mirror and adjust.

Resize the leprechaun on a horseshoe to 40%, place on the left below the wordart.
Resize the goodie bag to 50%, place on the left below the tube layer.
Resize the clover scatter to 50%, place on one side of the frame layer, duplicate, mirror.
Resize the winged shamrock to 50%, place on the upper left on the frame.

Resize bow 3 to 50%, paste on the upper right corner of the frame.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Lucky

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at her Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Lucky Enough by Horseplays Pasture Design  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE
 

 Font of Choice, I used Celtic

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 

 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 4, apply your mask, delete and merge group, resize larger to 105%, then paste paper 1, apply the mask again, merge down.
Paste the wire on the mask, change the blend mode to Luminance (L).

Paste frame 8 on the wire layer, resize larger to 110%.

Paste frame 4, click inside with your magic wand, expand by 5, paste paper 3, invert, delete, select none, move below the frame.

Being on the top frame layer, resize your tube to 45%, paste on the right side.

Paste the Gold at the bottom, duplicate twice, move one over to the right and the other over to the left.

Paste the word Luck on top of the gold layers.
Resize the horseshoe to 45%, free rotate to the right at 20 degrees, duplicate, mirror, moving both below the gold layers.

Corner flower line, free rotate at 90 to the left, move to the bottom below the tube layer.

Paste flower 3 below the corner flower layer on the right, duplicate, mirror, move down some and erase any stem showing below.
Resize flower 1 to 85%, paste on the paper layer below the window, sharpen once.
Resize the original flower 1 to 70%, paste above flower 3 layer on the left, sharpen once, duplicate, mirror.


Resize the leaf vine to 25%, paste below the corner flower layer on the left, duplicate, mirror, duplicate again and move over some.

Resize the dragonfly to 30%, place where you like, duplicate and mirror and place again where you like.

Resize clover 1 to 20%, paste on the gold coins, duplicate a couple of times, place where you like.

Resize the bird to 30%, place where you like, I placed mine on the wordart.
Resize the butterfly to 15%, free rotate to the left at 25, place where you like, duplicate, mirror.

Resize ribbon 2 to 80%, free rotate to the left at 90, place below the gold coins at the bottom, duplicate, mirror, move up some.

Resize bow 4 to 15%, place on the letter K of the wordart.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.