Summer Breeze

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Janna Prosvirina.

You need a license to use this art work. Please do not use without a license.
My license is for DC, they only sell scraps now.
 

 You can find this art at the Digital Art Heaven Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

MC Whispers of Spring at The Creative Chicks Blog  HERE
Check out the rest of the blog HERE
Template 165 by DD HERE

DD_NFM_2015_Mask 2  HERE
Filter
EyeCandy4000-Bevel Boss
 

Font of Choice, I used Magnolia Light

Drop Shadow usually V2 H2 40 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit the letter d to duplicate,
close the original.
Delete the credits.

Paste paper element 39, apply your mask, delete and merge group, move to the bottom layer, free rotate 90 to the right.

Select the Aqua rectangle, paste paper element 40, invert, delete, and delete the template layer also.
Apply Eye Candy4000 Bevel Boss with these settings
Width 3,  Height 25, Smoothness 25
Lighting 73, 69
100, 25
Bevel profile set on Bump

On the white oval add noise at 50% if you like.

Select the Blue oval on the template, paste element paper 39, invert, delete, mirror and paste your tube, delete and select none. Change the blend mode to Soft light or one you prefer.
Apply the EyeCandy4000-Bevel Boss again with the same settings on the paper layer.

Merge bottom purple shape down with top purple shape, paste element paper
45, invert, delete.
Apply the bevel boss to these also.

Merge the dark blue bottom rectangle with the top dark blue rectangle,
paste element paper 41, invert, delete.

Merge the top aqua circle down with the bottom aqua circle,  paste element paper 42, invert, delete and apply the bevel boss with the same settings.

Merge bottom purple rectangle down with the top purple rectangle, apply the bevel boss as before.
Then select this layer, select all, float, defloat, apply EyeCandy4000-Swirl with these settings
Whirlpool Spacing 69.35
Smear Length 5.46
Twist 100
Streak Detail 20
Click ok and then select none

Add noise at 50% to the white borders rectangles.

Paste your other tube just below the wordart shadow and move where you like.

Paste element 38 below the tube layer on one side, duplicate, mirror, duplicate again and move to the center.
Paste element 22 on one side above the tube layer, duplicate, mirror.
Always adjust how you like them.

Resize element 35 to 40%, place at the bottom in the center.
Resize element 23 to 50%, mirror place on the left side.

Resize element 37 to 50%, being on the top layer, place on one side, duplicate, mirror.

If using the same tube I am, paste the butterflies where you like, or use the butterflies from the kit.

Resize the ladybug to 35%, duplicate and place where you like.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU Clockwork Orange

FTU Clusters using
PTU **Clockwork Orange Fan Group Exclusive **

by BLT DeZignz
Exclusively sold at BLTDeZignZ's fan group for $1.50

This kit is Awesome, you will love the steampunk elements
for all your steampunk tagging needs.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

 

 

Here are a couple of tags I made with them

 

When it Rains

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Dark Yarrow.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the Digital Art Heaven Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Thunder Struck by Wicked Princess Scraps  HERE
Check out the rest of her blog HERE

RR Mask Set 2_1   HERE
 

Font of Choice, I used Magnolia Light

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer
Paste paper, apply your mask, delete, merge group.
Go to Adjust, Hue and Saturation, Colorize and change the numbers to
Hue 151, Saturation 198

Paste tree 3, move to the right, change the blend mode to Luminance(L)

Resize the flowers to 55%, paste on the left side, duplicate, mirror, duplicate
again and move to the center, change the blend mode on all 3 to Luminance(L).

Paste the lightening 3 on the left side, then paste lightening 2 over to the right more.

Resize your tube to 85%, paste off center a bit below the flower layers,
erase any of the lightening on the umbrella.

Resize house 2 to 50%, place below the flower layer on the left side, duplicate,
resize to 75% and place on the right below the tree layer.

Resize the pink house to 50%, place on the right below the other house layer,
change the blend mode to Luminance(L).

Paste the ribbon above the mask layer, mirror, go to Adjust Hue and Saturation and use the same settings as before to color the ribbon, change the blend mode
to Luminance(L)

Being on the top layer, paste  Rain 1, resize to 50%, Hue and Saturation like before to change the color, lower the opacity to 36 or so, paste where you like,
duplicate a couple of times and move where you like.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

FTU Cluster's using PTU **Tangy**

FTU Clusters using PTU **Tangy**

by BLT DeZignz

This kit is Awesome, you will love the colors of this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

Rainy Day

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE
 

Supplies Needed

I used PSPX...but any of them should work.

Summer Rain by Irish Princess Designs  HERE
Check out the rest of her blog HERE

RR Mask Set 2-1 HERE

Font of Choice, I used One Day After Rain

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, resize paper 2 to 82%, apply your mask, delete and merge group, duplicate the mask and merge down.

Paste element 12 on the left side more, duplicate, mirror.
You can adjust these once you finish your tag.

Paste element 10, free rotate to the left at 45 degrees, resize to 85%.
Click inside with your magic wand, expand by 5, paste paper of choice, I used paper 5, resize to 84%, invert, delete and move below the frame, select none.

Paste element 21 below the paper layer on the left, duplicate, mirror and adjust.

Being on the top layer, paste element 29, resize to 70%, move to the lower part of the frame to one side, duplicate, mirror.

Paste element 1 and move below this layer.

Resize element 4 to 55%, place below the grass layer on the right, duplicate, mirror,

Paste your tube and place where you like.

Resize element 6 to 70%, place on the left below the grass layer.
Paste element 21 on the wishing well.

Resize element 20 to 60%, place by the wishing well, duplicate, move up behind the tube layer, duplicate again and move up more on the right behind the tube.

Resize element 5 to 15%, mirror, place on the water on the right.

With element 23, you will paste it above the swirl layers, move where you like,
erasing the parts you don't want showing, then duplicating a few times, flipping one or two and placing and erasing other areas of it.
This is one you will play around with to get the look you want.

Resize element 9 to 15%, free rotate to the left at 90 degrees, place above the fence layer, duplicate as many times as you like and place in different areas.

Resize element 28 to 65%, mirror, place at the upper right above the tube layer,
lower the opacity to 75%. Duplicate, move over to the left below the tube layer.
Duplicate again, erase the cloud, place the rain drops lower on the tag, erase
any drops you do not want.

Resize element 17 to 15%, place by the wishing well.

Resize element 25 to 30%, place on the right below the frog layer.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Bad A$$ Chick

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE
 

Supplies Needed

I used PSPX...but any of them should work.

Bad A$$ Biker Babe by MizTeeques  HERE
Check out the rest of her blog HERE
Collab Templates by Denny and Pooker HERE
RR Mask Set 2-1 HERE
Filters
EyeCandy 4000-Gradient Glow, Chrome
Xero Filter-Mistifier

Font of Choice, I used Bad Cargo

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, delete the credits and large stars.
Delete each layer of your template as you go along

Paste paper of choice and apply your mask, delete and merge group.

Resize element 35 to 95%, paste below your mask layer, move up,
duplicate flip and move down some.

Black rectangle add noise at 50% or however much you like.

White rectangle, new layer fill with #59040b

Pink strip, new layer, fill with #6e8899

Pink rectangles, new layer fill with #59040b

Black strips, paste paper 1
White circles, paste paper 4

Pink rectangle paste paper  5, invert, delete, paste your small tube, delete,
change the blend mode to Luminance(L) and lower the opacity to 40, duplicate, mirror and adjust.
 Apply the xero filter- Mistifier to the tubes,  changing the haziness
and strength to 200

Pink circle,  paste paper 7

Select your Black circle, paste paper 7, invert, delete, then paste the
middle size tube, delete, select none. Change the blend mode of your tube
to Luminance (L)
On the White circle apply a fat gradient glow using EyeCandy 4000, 
with this color #59040b and width set at 3.
Apply noise at 50%.

Small stars apply EyeCandy 4000 Chrome with these settings
Outdoor.tif
10.80, 50, 50, 0, 72.00
Inside marquee checked
Apply this same setting to the skulls

Paste your tube above the wordart badass,  move to the right a bit and up, duplicate, select the black circle,
float, defloat, invert, being on the bottom tube, delete, select none.
Back to the top tube and erase the legs at the bottom part to show the wordart.

Resize element 1 to 60%, paste on the top layer and place how you like.

Resize element 41 to 50%,  free rotate to the right at 90, place below the bike on the right.
Resize element 23 to 40%, place on the rose, erase part of the band over the rose.

Resize element 35 to 35%, place by the flower. Change to color of the lipstick
to one you like.

Resize the wordart 8 sign to 30%, free rotate to the right at 20 and place on the left side up a bit.

Resize element 27 to 35%, place at the upper left, erase the one large star
going past the wordart, duplicate, move to the lower right below the boots.

Resize element 8 to 70%, place on the left below the motor cycle.

Resize wordart 1 to 15%, free rotate to the right at 30 and place on the bike.
 

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU **Ebb & Flo**

FTU Clusters using PTU **Ebb & Flo**

by BLT DeZignz

This kit is Beautiful, you will love the colors

You can purchase this kit HERE

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

 

 

Seagull on the beach



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Africa Sunsets.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the Digital Art Heaven Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Sea_breese by Anna Jolanta  HERE
Template by Dee HERE

RR Mask Set 2_1   HERE
 

Font of Choice, I used Manic Sea

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, duplicate and close the original.
Delete the credits, small and large flower circles and wordart.
Go to Image, Canvas size, 800 x 800 or one you prefer.

Resize paper 12 to 35%, apply your mask, delete and merge group, duplicate, merge down, move to the bottom layer.

Paste cluster frame 5, resize to 30%, paste on the large blue circle.

Select the large blue circle, float, defloat, resize paper 3 to 35%, paste,
invert, delete, also delete the template layer, select none.

Select blue rectangle, resize paper 17 to 35%, paste, invert, delete.

Select the small white circle, paste paper 17, invert, delete.

Pink Rectangle, paste paper 3, invert, delete.

Select the pink rectangle frame, add a new raster layer, fill with #2e4768,
select none and add a noise at 50%.
Do the same with the large pink circle.

Resize the sand to 40%, paste below the cluster frame layer.
Resize your tube to 50%, being on the top layer, paste on the right side,
duplicate, mirror, resize to 50%.

Resize element 79 to 30%,  place on the left below the sand layer, duplicate, mirror and move down just a bit.

Resize the lighthouse to 25%, place on the right above your light rectangle.

Resize element 10 to 25%, place at the upper left side.

Resize element 122 to 95%, paste on the bottom layer to the left, duplicate, mirror, adjust and erase some of the edge.

Resize one of the fish that you like, I used element 150, resized to 15%,
place below the frame layer, change the blend mode to overlay, duplicate,
move over more.
Resize element 161 to 15%, place above the fish layer.

Resize element 81 to 5%, place on the sand, duplicate once.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU **Ice Cream In Summer Collab**

FTU Clusters using PTU **Ice Cream In Summer Collab**

by BLT DeZignz

This kit is a collab, you will love the colors and the fun elements to tag with.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

Here are a couple of tags I made with them

 

Paradise Babe

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Steve Baier.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Tropical Paradise by Karra's Kreative Korner  HERE
Check out the rest of her blog  HERE

RR Mask Set 2_1   HERE
 

Font of Choice, I used Yaquote Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 1, resize larger
to 125 then apply your mask, delete and merge group.

Paste the sand, move down, duplicate, move over some.
Paste the fence on top of the sand.
Paste the flowers above the fence layer.

Paste frame 4 below the sand layer, duplicate, change the blend mode to burn,
merge down.
Click inside with your magic wand, expand by 5, mirror your close up tube first,
then paste, invert, delete. Change the blend mode to overlay.

Resize your tube to 90%, paste on the right side.

Paste Palm tree 2 on the right behind your tube layer, move up a bit,
duplicate, mirror, resize this one to 85%, move below the fence layer.

Resize the tall grass to 50%, place on one side above the fence layer, duplicate,
mirror and adjust to cover the bottom part of the palm tree on the right.
Duplicate the tall grass a couple more times and place below the fence layer
where you like.

Resize the flower branch to 50%, paste below the grass layer, duplicate, mirror.

Paste the lanterns on the frame, erase any part that is over the edge of the frame.

Resize the sandal to 25%, place by the grass, duplicate and move over
just a bit.

Resize the Pina Colada drink to 50%, place by your tube on the right.

Resize the hibiscus 2 to 50%, place above the fence layer on the right,
duplicate, mirror, move above the tree layer. Duplicate one and resize to 50%,
place how you like, duplicate a couple more times.

Duplicate the 2 tall grass layers, move down to the frame layer, then
move up some on each side.

Resize shell 1 to 20%, place where you like, duplicate once and place again.

Resize the coconut to 25%, place where you like.
Resize flower 1 to 15%, duplicate a couple of times and place in different areas.
Resize the tropical stone to 25%, duplicate once or twice and place.

Resize the sun to 80%, paste just above the mask layer and erase any part
showing inside the frame.

Resize the parrot to 20%, place on one of the palm trees.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

All Alone Forum Set

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Jenga Garcia.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

Filters
Mura Meister Copies-Encircle
AAA Frames-Foto Frame

 
Font of Choice, I used Impact and Wingsong

Drop Shadow of choice

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250, paste your tube and crop it with your crop tool.
Apply Mura Meister Copies-Wall Paper rotate.
Then go to Adjust, Blur, Motion blur, 315 and strength at 100, then change the number to 45 and apply again.

Paste your tube and crop, change the blend mode to soft light, merge visible,
apply AAA Frames-Foto Frame, leaving all numbers as is.
You may have to undo this and reposition your tube where you like the
looks and then apply the Foto Frame again.
You will have to play around with this part to get the look you want.

Paste your tube, mirror, resize to 70%, and place on the right side,
merge down.

Copy this tag to use for the Avator before you add your words.
Add whatever saying you would like on the tag.
I wrote All Alone, using Impact first and then Wingsong.
Copy the words to use on the Avator also before merging.

Once you are happy with the way your tag looks, merge visible.
Apply the Foto Frame again, changing the first number to 0 this time.
Now add your copyright and name.

Avator

Open a new image to a size your group or forum allows,
I am using 175 x 175
Paste your tag, resize to 75%, adjust how you like, then resize the words to
75% and paste, merge visible and apply the AAA Frame-Foto Frame with
the first number still on 0.

Add your copyright and name and you are done.

That's it

Hope you enjoyed doing my tut.

Emo Girl

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  katharine.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Emotional Me by Sweet as Honey Creationz  HERE
Check out the rest of her blog  HERE

Monti Blind Mask  HERE
Click on the word Extras on the left to go to the masks

Filter
Mura Meister Copies-Encircle
 

Font of Choice, I used Sverige Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 8,
apply your mask, delete and merge group.

Paste frame 3, click inside with your magic wand, expand by 5, paste paper
4, invert, delete, mirror your tube, then paste, delete, select none, moving both
below the frame layer.
Duplicate the frame, resize larger to 105% and move below the first one.

Duplicate your tube, go to Adjust, Blur, Gaussian blur at 5,
change the blend mode to screen or one you prefer.

Paste Sparkle 1 on the paper layer in the frame, erase any showing outside the frame.

Paste the Glitter 1 just above the mask layer, flip and mirror.

Paste Rose 1, apply Mura Meister Copies-Encircle.
Paste the Rose again but flip it this time and apply Encircle again.

Resize your tube to 40%, place above the frame layer on the right.

Resize ribbon 2 to 80%, place at the bottom by the legs of your tube.

Resize Emo bear 1 to 70%, place on the right side.
Resize the pills to 60%, place below the bear layer.

Resize Star 1 to 50%, place on the right side below the ribbon layer.

Resize the Dairy to 60%, place on the left side above the ribbon layer.
Resize the boots to 80%, place on the left below the dairy.

Resize the phone to 40%, free rotate to the left at 25 degrees, you can click
several times with your magic wand or take your freehand tool and draw around
the light color on the phone, resize your orginial tube to 30%, mirror and paste,
invert, delete, select none.
Change the blend mode to overlay.

Resize the cupcake to 50%, place on the right below the tube layer.
Resize the lip gloss to 65%, place by the diary.
Resize the bomb to 75%, place below the boot layer on the left.

Resize the candy to 60%, paste about center below the boot layer, duplicate,
move above the diary layer and over a bit.

Paste Sparkle 2 on the top layer and move down, erase any part you do
not want on your tube layer.

Resize the emo butterfly to 30%, place on the right below the tube layer, duplicate,
free rotate to the right at 30, move to the upper left side.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
Always check your tag for any shadows on the edges.
 

That's it

Hope you enjoyed doing my tut.

FTU snags using FTU **Pouty Panda**

FTU snags using FTU **Pouty Panda**

by BLT DeZignz

This kit is filled with emo elements and papers for all your tagging  needs.

 To get this Free kit, join BLT DeZignZ's Fan Group
 HERE 

 

Just click to enlarge and right click and save

 

Here is a tag I made with it

Snags below, please do not alter in anyway

Do not add names or anything to the snags

Thank you

 

Bright Summer Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Stella Felice7.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Bright Summer by Mythical Designs  HERE
Check out the rest of her blog  HERE

WSL_Mask 84  HERE
 

Font of Choice, I used Sverige Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3,
apply your mask, delete and merge group.

Paste frame 6, resize to 90%.
Paste frame 4, resize to 90%, merge down, click inside with your magic
wand, expand by 5, paste paper 6 or one you prefer,
 invert and delete, select none.

Duplicate the frame, resize to 65%, move down to one side and below
the paper layer, duplicate and mirror, merge down.
Click inside these two frames, expand by 5, paste paper 6 again,
invert, delete, select none.

Resize element 21 to 70%, place on one side on the top frame, duplicate,
mirror.

Resize element 17 to 50%, paste below the greenery you just pasted,
duplicate, mirror.

Being on the top layer, paste element 4 and move toward the bottom.

Resize element 14 to 40%, paste on the bottom layer on one side,
duplicate, mirror.

Being back on the top layer, resize your tube to 40%, if using the same one I am and place how you like it.

Resize element 15 to 40%, free rotate to the right at 90, paste below your
tube layer on one side, duplicate, mirror.

Resize element 23 to 30%, place under your tube on one side, duplicate, mirror,
duplicate again and move toward the center more.
Move the star swirl above all of these leaves.

Resize element 7 to 30%, place where you like, duplicate, mirror and
move down some on the other side.

Paste element 18 just above the mask layer, then go to Adjust,
Hue and Saturation, Colorize with both numbers at 255,
adjust to your liking, duplicate and adjust again.

Paste element 3 below your tube layer, move to one side how you like,
duplicate, mirror and move up and over how you like also.

Resize element 20 to 50%m place on the right below the small frame layer,
duplicate, mirror.

Now go back to element 21 the tall grass on your tag, duplicate it twice,
move both down to just above the glitter layers on the mask, adjust how you
like them and erase the longer blades of the grass.

Duplicate the butterfly and resize to 70%, mirror and move up on the upper left side.

Resize element 12 to 25%, place on the left below the tube layer where you like.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Coffee Fairy

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Erin Ewer.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Coffee Cafe by Gimptactic  HERE
Check out the rest of her blog HERE

Font of Choice, I used AR Script 2 Medium

Drop Shadow of choice

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste frame 6, resize to 90%, click inside with your magic wand, expand
by 5, paste paper 1, invert, delete, select none and move paper below the frame layer.
Duplicate the frame, resize larger to 115%, move below the first frame,
then go to Adjust, Hue and Saturation, colorize and change the numbers
to
Hue 33, Saturation 175

Paste the Petals element, resize to 65%, go to Adjust, Hue and Saturation,
Colorize and change the numbers to
Hue 28, Saturation 70, then apply
Mura Meisters Copies-Encircle with the number on 12 and all others left as they are, move this below all the frame and paper layers and lower
the opacity to about 57%.

Paste your tube above the frame layer, resize to 90%, place on the left side,
add the cookies that comes with the tube also resized to 90%.

Paste the bubbles, resize to 10%, place over the cup in the fairy's hand.
Paste the original bubbles again, resize to 20%, place over the large cup
the fairy is sitting on, duplicate and move up some.
Sharpen all the bubbles a couple of times.

Paste the box element below the tube layer on the right side.
Paste the French press on the right below the box layer.

Paste Scatters 1 above your tube layer at the bottom, sharpen and
add your drop shadow, duplicate, free rotate to the right at 90 degrees,
place on the left side below the tube layer, duplicate, mirror.

Resize cookies 1 to 60%, place by the spoon on the saucer.
Paste Scatters 3 below the tube layer and adjust how you like it.

Resize the heart element to 60%, place on the cup of your tube.

Resize the books to 75%, go to Adjust, Hue and Saturation, Colorize
with the numbers at
Hue 28 and Saturation at 70
place the books below the tube on the left side.

Add any other elements that you would like.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

FTU Clusters using PTU **Tangy**

FTU Clusters using PTU **Tangy**

by BLT DeZignz

This kit is Awesome, you will love the colors of this kit.

You can purchase this kit HERE 

 

Just click to enlarge and right click and save

Here are a couple of tags I made with them

 

Fairy Garden

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Janna Prosvirina.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Florality by Chichi Designz  HERE
Check out the rest of her blog HERE
RR Mask Set 2_1   HERE

Filters
Xero Filter-Soft Mood

Font of Choice, I used Summertime

Drop Shadow of choice

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste paper 6, apply your mask, delete and merge group

Open the frame, resize to 65%, paste, free rotate to the right at 75%, move up some on the left, then click inside with your magic wand, expand by 5,
paste paper 12, invert, delete, select none, move below the frame layer.
Duplicate the frame and paper layer, mirror and move down on the right some.

Paste the fence above the frame layers and move down a bit.

Resize leaves 1 to 75%, place above the fence layer on one side, duplicate, mirror.

Paste your tube and place in the center.
Paste your tube again, mirror, move below the frame layer on the right,
change the blend mode to overlay and apply the Xero Filter-Soft Mood.

Resize Flowers 1 to 80%, paste on one side below the leaves 1 layer,
duplicate, mirror, duplicate again, resize to 70%, move over some,
duplicate again, mirror.
Resize the Plant layer to 50%, paste below the flower layers, duplicate, mirror.

Resize the grass to 85%, paste below the flower layer, move to the right,
duplicate, mirror.
Paste Flower Bush 1 on the leaves 1 layers.
Paste the bubble trail below your tube layer.

Resize the Mushroom to 50%, place below the leaves 1 layer on the right,
duplicate, resize to 50% again and mirror.

Resize Flower 2 to 70%, place on the left below the fence layer and up some,
duplicate and move over and down a bit.

Paste Flower 3 above the paper layer of the frame on the left and adjust
to your liking.

Paste the Brush on the left upper side just above the mask layer.

Paste the Swirl Sparkles below your tube layer and mirror.
Paste Sparkles 1 on top of the tube layer and move down a bit.

Resize the lamp to 40%, place on the left side of your tube.

Add any other elements that you would like.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.