FTU Clusters using **PTU Shades Girly **

FTU Clusters using **PTU Shades Girly **

by BLT DeZignz
This kit is Beautiful and fun, you will want this one for sure
for your tagging needs.
 

You can purchase this kit  S&CO HERE or PFD HERE or
Digiscrapbooking  HERE

 

Just click to enlarge and right click and save

Here are a couple of tags I made with them

 

 

FTU Clusters using **PTU Fall Fun **

FTU Clusters using **PTU Fall Fun **

by BLT DeZignz
This kit is awesome and fun, you will want this one for sure
for your fall tagging needs
 

You can purchase this kit  S&CO HERE or PFD HERE
or
Digiscrapbooking  HERE

 

Just click to enlarge and right click and save

Here are a couple of tags I made with them

 

 

 

 

FTU Clusters using **PTU Mathilde **

FTU Clusters using **PTU Mathilde **

by BLT DeZignz
 

You can purchase this kit  HERE

 

Just click to enlarge and right click and save

Here are a couple of tags I made with them

 

 

The Rose

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lys Isange.

You need a license to use this art work. Please do not use without a license.

 

 You can find this art  HERE
or HERE or HERE or HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Sweet Heart by Heather's Devine Designs  HERE
Be sure to check out the rest of the blog HERE
Tres Mask 0113  HERE
You will have to add this one to your mask folder

Filters
Mura Meister Copies-Encircle

Font of Choice, I used Brotherhood Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 7,  resize to 95%, apply your mask, delete and merge group.
Paste element 36, click inside with your magic wand, expand by 5, paste paper 8,
invert, delete, mirror your tube, paste how you like, delete, select none.
Change the blend mode to screen.
Close off your mask layer and merge these layers together, then open the mask layer.

Resize your tube to 35%, place on the right side, then move the merged frame layer over and up some on the left side.

Resize element 8 to 55%, apply the Mura Meister Copies-Encircle change the first number to 14, move to just above the mask layer.
Resize element 75 to 65%, apply Mura Meister Copies-Encircle with the same settings, paste.

Paste element 86, resize larger to 135%, and place above the leaves layer.
Paste element 35 at the bottom of the legs on your tube.
Resize element 43 to 65%, place on the left side.
Resize element 33 to 55% and place by the champagne bottle.
Resize element 62 to 50%, place behind the champagne bottle.
Resize element 42 to 50%, mirror, place between the glasses and champagne layers, duplicate, mirror, place below the champagne bottle.
Resize element 64 to 55%, place below the tube layer in the center.
Resize element 18 to 55%, place on the right below your tube layer.
Resize element 15 to 50%, place on the right above the box and move in some.

Add any other elements that you would like.

Once happy, close off your background if you used one, merge visible
Resize first, then add copyright and name.

That's it

Hope you enjoyed doing my tut.

Vintage Love

This tut was written for those with a basic knowledge of psp.

I am using the beautiful tube, called Chanson d'avril by
Veronica Nunez
 You need a license to use this art work. Please do not use without a license.
 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

Vintage Valentine by Gimptastic  HERE  
Check out the rest of her Blog HERE
RR Mask  Set 2-1 HERE

Font of Choice, I used

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 8, resize larger to 130, apply your mask, delete and merge group.

Paste frame 5, free rotate to the right at 90, duplicate, move over some and erase or use your selection tool to remove the part in the center you do not want, merge down.
Resize the corner element to 90%, place below the frame on the upper right, duplicate, mirror, duplicate, flip, duplicate, mirror.
Erase some of the overlapping leaves on the sides, then merge these 4 layers together.

Clip inside your frame with your magic wand, expand by 5, paste paper 4, invert, delete, move below the frame, mirror your tube first, paste on the left side, delete, select none. Change the blend mode to overlay.

Being on top of the frame layer, paste your tube on the right side, resize to 85%.

Paste flower 3 at the bottom of the frame, duplicate a couple of times and move on each side. Duplicate one and resize to 70%, place on top of the others, duplicate again and move over.
Resize flower 2 to 60%, place below the other flowers at one end, duplicate, mirror.
Resize the teapot to 70%, place below the flowers on the right.
Resize the label to 70%, free rotate to the left at 15%, place on the left below the darker flower layer.
Resize heart 1 to 60%, place by the wordart label, duplicate, move down some in front of the first heart.
Resize the pearls to 90%, place just above the frame layer, duplicate, change the blend mode to burn and merge down, duplicate, mirror, flip and move back down to the bottom.
Resize flower 1 to 70%, place on the left below the wordart label, duplicate, resize again to 70%. Duplicate the smaller one, mirror, duplicate again, adjust how you like them on the right.

Once happy with it all, close off any backgrounds, merge visible.
Resize first then add your copyright and name.

That's it

Hope you enjoyed doing my tut.

Back 2 School

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lys Isange.

You need a license to use this art work. Please do not use without a license.
This is a Free tube for you.
 

 You can find this art at the PFD Store  HERE
 

Supplies Needed

I used PSPX...but any of them should work.

School Time by Pam's Scraps  HERE
Check out the rest of her blog HERE
WSL_84 Mask  HERE
Filters
EyeCandy4000-Gradient Glow-Optional

Font of Choice, I used Chocolate Box

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, 800 x 800 or one you prefer.

Paste paper 1, apply your mask, delete, merge group.
Paste sparkle 2 on the mask, move to the top, duplicate, flip, mirror.

Paste frame 3, click inside with your magic wand, expand by 5, paste paper 3, invert, delete, move below frame, select none.
Duplicate the frame, being on the bottom one, go to Adjust, Blur, Motion blur,
Angle 45, strength 100, duplicate, mirror, flip. Move below the sparkle layers.

Resize your tube to 32%, place below the frame layer, duplicate, move above the frame, erase the leg part over the frame and any of the legs showing below the frame.

Paste the wordart on the frame at the bottom off center just a bit, add a medium gradient glow with the color white.
Resize the pencils to 40%, place on the left above the wordart.
Resize notebook 3 to 40%, place under the pencils on the left.

Resize the apple books to 40%, place on the right side.
Resize cup of tools to 35%, place by the apple books.
Resize glasses to 30%, place on the right by the cup of tools.
Resize the books to 75%, take your free hand tool and draw around the ones on the left, copy and paste below the wordart on the left.

Resize the phone to 40%, place on the right below the apply books, free rotate to the right at 15.
Resize the button to 40%, place on the upper left on the frame.

Resize the alarm clock to 30%, place on top of the books on the left.

Resize the hoodie to 60%, place on the right below the phone layer.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Back to the Books

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Soul Designer.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the PFD Store  HERE
 

Supplies Needed

I used PSPX...but any of them should work.

Back to The Books Kit- Digital Designs by Carolina  HERE
RR Mask Set 2-1 HERE

Font of Choice, I used Beauty School Dropout

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, 800 x 800 or one you prefer.

Resize paper 5 to 35%, apply your mask, delete, merge group, duplicate your mask, merge down.

Paste element 51, resize to 85%, duplicate, resize again to 85%.
Click inside with your magic wand, expand by 5, resize paper 5 to 35%,
paste, invert and delete, select none, move below the frame.

Paste element 52 on the left on top of the frame, duplicate, erase all but the grass part, move over some, duplicate again, move over, duplicate a few more times,
moving them down more and over to one side and the other until you like the looks of the grass. I have 7 layers of the grass for my tag.

Paste element 54 at the top of the frame.

Resize your tube to 50% if using the same one I am and paste.

Resize element 50 to 50%, paste on the right side above the grass layer at the bottom, duplicate, mirror, duplicate, free rotate to the right at 90, move this one below the sign with the bell on the left, duplicate again, mirror, duplicate and move up. Duplicate the one behind the bell sign, resize to 75%, move over toward the right a bit and down, duplicate this one and mirror.

Resize element 48 to 75%, being on the top layer, place on the grass on the right side.

Resize element 29 to 55%, paste on the right side between the 2 flower layers,
free rotate to the left at 25.

Resize element 1 to 45%, place on the left side above the flower layer.
Resize element 9 to 40%, place on the left by the bag.
Resize element 43 to 35%, place by the other books.
Resize element 27 to 25%, place on the open book.
Resize element 16 to 25%, place on the open book also.
Resize element 5 to 30%, place by the books.
Resize element 38 to 20%, place below the books on the left.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Eyes of the Cheetah Forum Set and Snags

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome tube, called Leopard Looking by  Guki Creations.

You need a license to use this art work. Please do not use without a license.

Animals of the wild are so beautiful, you will tagging with this tube.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Forest Keepers by Gimptastic  HERE  
Check out the rest of her Blog HERE

Filters
VM-Extravaganza-Transmission
Xero-Porcelain and Clarity
AAA Frame-Foto Frame

Font of Choice, I used Remachine Script

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Forum Set
Signature tag size 600 x 250  or a size you prefer.
Paste paper 2, merge visible.
Apply the VM-Extravaganza-Transmission with these numbers
75, 0, 8
Go to Effects, Edge effect, enhance twice.

Paste your tube, mirror, change the blend mode to overlay, sharpen once.
Paste your tube again, resize to 35%, place on the left side, apply the
Xero filter-Porcelain, then Clarity.

Paste the tree below the tube layer on the left, adjust, duplicate, mirror and
adjust to your liking.
Paste the house below the tree layer on the left and move to the left behind the tube.
Merge visible, then apply the AAA Frame-Foto Frame, twice with these settings.
Width 5, Opacity 50, all other numbers left on 0

Avator

Open a new image 175 x 175 or a size you prefer or your group or forum allows.
Paste your signature tag, resize to 80%, move how you like, merge visible,
apply the AAA Frame-Foto Frame with the same settings from before.

Once happy with the signature tag and the Avator, add your copyright and name.

That's it

Hope you enjoyed doing my tut.

Below are some snags for you to enjoy
Please do not alter in anyway, or add names to them.
Thank you
Enjoy

 

 

 

Enjoy

 

FTU Clusters using, PTU **Y'all Come Back Saloon **

FTU Clusters using
PTU **Y'all Come Back Saloon **

by BLT DeZignz
 

This kit is Awesome, you will love the all the elements for
your Western tagging needs and more

You can purchase this kit HERE, HERE and HERE

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

School Is Cool

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Kathy Siney.

You need a license to use this art work. Please do not use without a license.
This tube can be used in so many different styles, you will love tagging with this tube.

 

 You can find this art at Digital Art Heaven  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Back To School by Peggers  HERE
Check the rest of Creative Addictions Attitude Blog  HERE
Millie's PSP Madness Mask 87  HERE
Check out the rest of her Blog HERE
Animation 518 by Scrappy Bit of Fun HERE
Check the rest of her blog  HERE

Filters
Xero-Soft Mood, Clarity, Soft Vignette

Font of Choice, I used Big Surprise

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new layer 800 x 800 or a size you prefer, fill with white, paste paper 4, apply your mask, delete, merge group.
Resize your mask to fit your tag once done.

Paste frame 7, resize to 95%, then paste frame 6 on top, click inside with your magic wand, expand by 5, paste paper 22, invert, delete, do not deselect yet.
Free rotate your tube, right at 45 degrees, paste, adjust, delete, select none.
Apply the xero filter, Soft Mood at default setting,  then Clarity at default setting and then Soft Vignette with these settings
Elliptical, foreground color, Square mesh
0, 0, 0, 255

Paste your tube on top of the frames, resize to 80%, placing in the center.
Paste the wordart School is Cool under your tube at the bottom.

Resize element 15 to 55%, place on the left below the wordart layer, duplicate,
mirror.
Resize element 5 to 50%, place on the left below the wordart.
Resize the laptop to 55%, place on the right side.
Resize the pencils to 45%, place on the left side.

Resize element 1 and 2 to 55%, place one on each of the books, below the laptop layer.
On the blue one click inside the frame of the book, expand by 5, paste your resize tube, invert, delete, select none, change the blend mode to hard light.

Add any other elements that you would like.

Once happy, if going to animate, keep the white background and merge visible, if not going to animate, close off your background if you used one, merge visible.

Resize first, then add copyright and name.

Animation
Take your merged layer to animation, add layers to your tag to match how many layers your animation has.
The animation I used has 22 frames.
I also resize it to 50%, go to Edit, select all, animation resize to 50.
Being on the animation, Edit select all, copy, then being on the tag, edit, paste into the selected frame, and paste it on the laptop screen.

That's it

Hope you enjoyed doing my tut.

Time 4 School

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Time 4 School by Manipulated by Magik  HERE
Check out the rest of her blog  HERE

RR Mask Set 2_1   HERE
Check out the rest of her blog HERE
Animation by Scrappy Bit of Fun HERE
Check out the rest of her blog HERE
 

Font of Choice, I used Ampir Deco

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, fill with white if you are going to do the animation later.

Paste paper 7 or one of your choice, apply your mask, delete and merge group.

Paste frame 2, click inside with your magic wand, expand by 5, paste paper 2, invert, delete, do not deselect yet.
Paste your close up tube on one side, paste your middle size tube, click on each one and delete, select none.  Duplicate the large close up and mirror, move down a layer,  change the blend mode to overlay on these.

Duplicate the middle size tube, go to Adjust, Blur, Gaussian blur at 5, change the
blend mode to screen and merge down.

Paste your full tube on top of the frame, resize to 75%, so you can adjust the ones in the frame.

Resize the books to 75%, place on the right side on the frame.
Resize the laptop to 65% and place in front of the books.

Paste the crayon, free rotate to the left at 90, resize to 75%, place at the bottom of the frame on the left.
Resize the calculator to 45%, free rotate to the left at 12 degrees, move below the crayon.

Resize frame 1 to 90%, place at the top left above the mask layer, duplicate, mirror, duplicate, flip, duplicate, mirror and adjust them.

Resize the clock to 45%, place by the laptop.

Resize the back pack to 65%, place below the calculator on the left.

Resize the pen to 35%, place by the crayon.
Resize the apple to 40%, place below the crayon where you like.

Resize the composition  book to 60%, free rotate to the left at 12 degrees,
move below the back back on the left and up a bit.
Resize the paperclip to 20%, paste on the book and take your selection tool, draw around the center and delete.
Resize the ruler to 55%, free rotate to the left at 90, move just above the composition book.
Resize eraser to 45%, place below the crayon about center.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it unless you are going to animate now.

Animation
Now if you want to animate, open animation shop, copy merged tag and paste in animation.
Open your animation, go to edit, select all, then go to Animation, resize to 60%.
This animation has 22 frames, so you will need to have your tag with 22 frames as well.
Go to edit, select copy all, then edit, paste after current frame until you have 22 frames.
Now click on your animation, edit, select all, copy, click on your tag, edit, paste into select frame and paste on the calculator or where you like.
 

That's it

Hope you enjoyed doing my tut.

Gotta Go Back to School

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
School Memories by Jens Sweet Temptations  HERE
Check out the rest of her blog  HERE
Template 241 by Becky HERE
Check out the rest of her blog also HERE

WSL_Mask 84  HERE
Filter
Xero-Porcelain
 

Font of Choice, I used Amplitude

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift and d key to duplicate, close the original,
delete the credits and the white background.
Go to Image, canvas size 800 x 800 or whatever size you prefer.

Paste paper 2, apply your mask, delete and merge group.

Select rectangle 2, paste paper of choice, I used paper 3, invert, delete, select none, delete the template layer also.

Leave rectangle 1 as if or paste a paper of choice.

Paste one of the lockers on the left above the slate frame layer, duplicate, mirror,
and adjust on the right side.
Add a bevel effect to the slate frame, go to Effects, inner bevel with these settings
Bevel shape 2, width 4
8, 4, 4, 0
48, 36, 42
color white
then duplicate, change the blend mode to burn on the top frame.

Select the circle fill, select all, float, defloat, paste paper one, invert, delete, now
paste your close up tube, place where you like, delete, select none.
Duplicate your close up, being on the bottom tube, go to
Adjust, Blur, Motion Blur,
Angle 315, Strength 100

Add noise on the circle trim at 50%.
On the circle frame repeat the Bevel effect as before on the slate frame, also
duplicate and change the blend mode to burn as before.

Paste your full tube and adjust how you like, moving the small wordart
more to the left side.

Book Bag, resize to 37%, place below the tube layer by the leg.
Books, resize to 40%, place by the book bag on the left.
Shoe, resize to 35%, place by the books, duplicate, mirror and move back to the left and under the first shoe.
Laptop, resize to 50%, place on the right side.
Binder 1, resize to 40%, place below the laptop layer.
Calculator, resize to 25%,  free rotate to the left at 15, place below the shoes on the left.
Notebook 1, resize to 30%, place on the left below the calculator.
Open book, resize to 35%, place above the laptop layer.
Pen 3, resize to 30%, place on the book.
Clip 2, resize to 35%, place on the school paper layer at the upper right side.
Rule, resize to 35%, place by the bag.
Paper clips, resize to 25%, duplicate, paste where you like below the tube layer.

Add any other elements that you would like, once happy with it all,
close off any backgrounds you might of had, merge visible.
Resize first then add your copyright and name.

That's it, hope you enjoyed doing my tut.
 

FTU Clusters using PTU *Aurora*

FTU Clusters using
PTU **Aurora **

by BLT DeZignz
"Aurora" Kit can be found at the exclusive price of $1.50 from
BLTDeZignZ's Fan group - HERE
 or at Picsfordesign - HERE
and at
 Digiscrapbooking -HERE

This kit is Awesome, you will love the colors and tagging with this kit

 

Just click to enlarge and right click and save

 

Here are a couple of tags I made with them

 

 

 

Dreaming

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Katerina Koukiotis.
The tube is called Day Dreaming

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the Digital Art Heaven Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

On A Tropical Breeze by Horseplay's Pasture Design  HERE
Check out the rest of the blog HERE
WSL_Mask 84 HERE

 Font of Choice, I used Sverige Script

Drop Shadow usually V2 H2 40 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 5, apply your mask, delete and merge group.

Paste element 30, resize to 90%.
Take your Free hand tools, draw around the element, paste paper 3, invert, delete, move below the frame element.

Paste your tube under the frame element, resize to 65%, change the blend mode
to Luminance (L), place where you like.

Resize element 29 to 25%, place below the tube layer where you like, duplicate and move over and up some.

Paste the sand on top of the frame element, duplicate, move over some.

Paste element 6 above the paper layer of the frame layer, move to the right, duplicate, mirror.

Paste element 57 below your tube layer and adjust to your liking.

Paste element 50 below the frame layer on one side, resize to 75%, duplicate,
mirror, erase any part showing in the frame.

Take seashells 24, 25, and 25, resize to what you like and place on the sand.
I resized all mine to 30%. Duplicate as many of them as you want and mirror.

Resize element 38 to 25%, paste where you like on the sand, duplicate and move over a bit.

Paste element 81 on one side below the sand, duplicate, mirror.
Duplicate one and resize to 55%, move over a bit, duplicate, mirror.

Resize element 16 to 40%, mirror and place on the right.

Resize element 69 to 30%, place on the left side below the shells.

Being on the top layer,
Go to your pre shape, select the Ellipse, close off the background color, any color will do for the foreground, width at 2, then add a new raster layer and draw a circle around the frame for your wording.
Select your text tool, hover over the circle you just drew until you see an A with a curve under it, type out what you would like, adjust first, then convert the wording to a raster layer and delete the circle layer.
I typed out Dreaming three times, since the tube is called Day Dreaming

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.

Aurelia Beauty

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lea Barozzi.

You need a license to use this art work. Please do not use without a license.
 

 You can find this art at the Digital Art Heaven Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

Sweet Dreams by Dreamworld Design  HERE
Check out the rest of the blog HERE
DD_NGM1_2015_Mask 1  HERE
 Filter

Xero-Soft Mood

 Font of Choice, I used Acryle Script

Drop Shadow usually V2 H2 40 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 1, resize to 80%,
then apply your mask, delete and merge group.

Paste frame 3, resize to 70%, free rotate to the left or right at 90, duplicate, free rotate to the right at 45 degrees, move below the first frame.
Take your magic wand, click inside the top frame, expand by 5, resize paper 18 to 80% first then paste, invert, delete, then paste your tube, delete, select none.
Lower the opacity of your tube to 40%, apply the xero filter-Soft Mood.

On the bottom frame. click again, expand and paste paper 18, erasing any part showing thru your tube layer you do not want of the paper.

Resize your tube to 80%, paste on the left side on the top frame.

Resize Sweet Heart 6 (2) to 40%, place on the left above the tube layer.
Duplicate, resize to 85%, move over some, duplicate and resize to 85% again,
move over, duplicate, move below the tube layer on the left, duplicate, mirror.

Resize Sweet Heart 023 to 40%, place below the flowers, duplicate, mirror, adjust, duplicate, free rotate to the right, mirror, then move back behind your tube.

Resize Sweet Heart 028 to 30%, paste below the flowers by the tube, duplicate, move over some, erase any of the stem showing below.

Resize Sweet Heart 068 to 85%, paste on the right side on the top frame.
Resize Sweet Heart 090 to 60%, paste below the flowers on the right.

Resize Sweet Heart 020 to 60%, paste, free rotate to the right at 90, flip and place below the green leaf layers, duplicate, free rotate to the left at 90, move up behind your tube on the left.

Resize 061 to 40%, place just above the frame layer on the right.

Resize 087 to 20% free rotate to the left at 40 and place where you like.

Add any other elements you would like.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.
 

That's it

Hope you enjoyed doing my tut.