Happy New Year 2

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Lysisange .

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Holiday Dreams by SassyDede  HERE
Check out here blog HERE
Monti Blind Mask (Click on Extras to get mask)   HERE
Filters
Mura Meister-Copies
AAA- Foto-Frame
Font akaDora
 

Drop Shadow usually V2 H2 50 black

New image a size you prefer,  as usual mine is 800 x 800.
Paste paper 6, apply your mask, delete and merge group.
Paste the Clock, resize to 85%.
Take your free hand tool and draw around the orange circle of the clock or go to your preset and select circle, background set at null, line with 2 and draw a circle around the orange part, past your close up tube on one side, invert, delete.
Mirror your tube before pasting again and place a bit lower than the first one, delete and select none, change the opacity on both to about 20 or what you like and merge down with the clock.

Element 03, take your free hand tool, draw around the beads until you have gone completely around them, not getting the larger ornaments, copy and paste on your new tag, flip, you might have to get rid of some shading still first, then resize to 65%, duplicate to use later under your tube, then apply Mura Meister Copies-Encircle, move below the clock layer.

Resize element 3 to 65%, place on the left side.

Resize element 58 to 50% and place off to the right.

Resize your tube to 43% and place on the right below the champagne bottle layer.

Resize element 2 to 50%, place just below the champagne bottle layer and erase the ornaments showing.

Resize element 11 to 40%, flip, place on the right side below your tube layer.

Resize element 18 to 30%, place on the left side by the package.

Select your preset on circle, background set at null, draw a circle around the white circle on the clock, line width at 2, then add a new raster layer, holding your mouse over the circle you drew, making sure the letter A with a little half circle is showing on the bottom and type out what you would like yours to say. I wrote out Happy New Year using akaDora font and color #723620.
Convert to a raster layer, then delete the circle layer you drew.

Apply EyeCandy 4000-Glass with these settings
Bevel 1.67
Smoothness 75
30, 35, 50, 0, 50
Color white
Lightning I used was
Direction 65,  Inclination 76
Highlight Brightness100,  Highlight Size 40
Ripple thickness 0,  Ripple Width 11.16

Now select your wordart, float, defloat, add a new layer, fill with white, move below.
Paste element 13 below the mask layer, resize to 95%, mirror and adjust.
Add any other elements that you would like.

If going to do the Signature tag and Avator then do not merge together just yet.

Signature tag
Open a 600 x 250
Paste paper 6, then crop your tag.
Take the bottom 6 layers of your tag and paste one at a time, resize the greenery to 95%, copy the clock, resize to 90% and move down just a bit.

Paste your original tube and resize if you like, I just resize mine very little and placed on the right side.
Back to your tag, copy the papers below your tube layer and resize to 75% and place below your tube layer on the signature tag.
Back to the tag, copy the gift box and resize to 70%, place on the left side below the tube layer and erase the little holly by the clock hands.
Back to the tag, copy and paste the champagne bottle and resize to 50% and place.
Copy the little kitten and resize to 50% and place on the left in front of the gift box.
Champagne glasses resize to 50%, mirror and place to the right behind your tube layer.
If happy with it all, merge visible and add a frame of choice.
I used AAA Foto Frame, width at 4, Opacity at 35 and used
Transparent Orange from the drop down. You will see default first, click on that and you will get a selection of other colors.
Add your copyright and any saying and name now on this one.
Apply the glass and white background for the saying and name as before.

For Avator, size whatever is allowed in your group or forum.
I used 175 x 200
Paste paper 6, crop your tag, go to your tag, copy the clock, paste and resize to 40%.
Resize the gift box to 40%, place on the left, erase the holly,  resize the champagne bottle to 30% and place more in the center.
Resize the papers layer to 35% and place on the right side below the champagne bottle layer.
Resize the kitten to 35% and place on the left side being on the top layer.
Once happy, merge visible and add the same frame as before.
Add your copyright and name or initial.
Now go back to your original tag and close off any background you used and merge visible.
Resize first, then add your Copyrights and name and that's it.

Hope you enjoyed doing this tut.

The New Year

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Di_Halim .

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Scraps N Company  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Happy Holidays by Disturbed Scraps  HERE
You can check out her blog HERE
MC 14 Mask HERE
Be sure to check out her blog  HERE
Filters used
Xero-Clarity
Font Billion Stars
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.

Paste paper 01 and apply your mask, invert, delete and merge group. Resize your mask later if needed to fit your tag better.

Paste HH048, the piano and move to the left.

Paste your tube and resize as needed, if using the one I am, I resized mine to 45% and place on the right.
Duplicate the tube, go to Adjust, Blur, Gaussian blur at 3, change the blend mode to screen or one you prefer, merge down.
Apply the Xero Filter, Clarity.

Paste HH 052 and place below the piano layer and go to Adjust, Hue and Saturation,  colorize and have both on 0.

 Paste HH019 below the piano layer on the right, resize to 95%.

Paste HH051 below the tree layer on the right and move up some, go again to Adjust, Hue and Saturation, colorize with both numbers on 0.

Paste HH 054 and move below the new year ball and colorize the same, duplicate, mirror, move below the clock layer and up some, erase the post showing at the bottom of the piano.

Paste HH 037 on the upper left just above the mask layer and colorize like before with both numbers on 0,  add noise at 35%, duplicate, mirror, duplicate again, move back to the center, below the mask layer and move down some.

Paste HH 044 and take your free hand tool, draw around the red heart and delete, then resize to 45%, place below the tube layer by her shoe.
Resize HH 045 to 55%, place below the glasses. The gift boxes will cover the number 3 on the champagne bottle.
Resize HH 06 to 55% and place to the left of the glasses and below that layer.

Resize HH 027 to 55%, free rotate to the left at 25 degrees and place below the ornament layer and move over to the left a bit.

Paste HH 015 below the tube layer and move to the left over the piano and light post, duplicate, mirror and move up a bit on the tree.

Resize HH 010 to 75%, place on the right below the sparkle layer on the tree, duplicate and move over to the left more and cover the number 3 on the bottle.

Resize HH 042 to 40%, change the color to the same you used before, then place on the left side below the piano layer and hide the last part of the numbers.
Resize HH 031 to 50%, place by the piano leg below the sparkle layer, duplicate the shoe and move back by the first shoe.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.

Snowflake Fun

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Her blog is here HERE

 You can find the kit, Scrap Zero Degrees by Clarez Creationz  HERE
MPM Mask 88  HERE

Xero Filter-Titanium and Clarity

Font of Choice, I used Flakes

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image and as usual  mine 800 x 800.

Paste ZD18 flake, click in snowflake frame and expand by 5, paste paper of choice, I used paper #2, invert and delete, select none.
 Move below the frame layer.

Paste your tube and place more to the right of the flake frame, then paste ZD08 and move under your tube, duplicate and mirror.
Adjust your tube how you like and erase the edges of the snow so it will not have a line when you add your drop shadow.
Apply the xero filter-Titanium with these settings
20, 50, 50, 127, and have subtle checked.
Then apply xero filter, Clarity, leave all the numbers as they are but check Fix saturation.

Paste ZD26 on the right side below the tube layer.

Resize ZD10 to 50% and place on the left side below your tube layer.
Resize ZD07 to 50%, place below the snowman layer and move to the right just a bit.

Resize ZD38 to 25% and place on the right side.
Resize ZD36 to 25%, free rotate to the right at 20 degrees and place behind the cup.

Reszie ZD46 to 25%, place on the snowflake frame and erase a small bit of the string to make it look like it is hanging over it.

Select the tree, float, defloat, paste ZD47 on the tree. invert, delete, paste again and place in a different area and delete again, select none.
Resize ZD34 to 50%, sharpen, add noise at 50% and duplicate as many times as you like and place in different areas on the tag. Resize again to another size and place again.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Merry Christmas Everyone

Merry Christmas everyone

Wishing you all Love, Peace and Joy

 

Happy New Year

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey .

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Shifting Gears Kit by Digicats (and Dogs)  HERE
Monti Blind Mask (Click on Extras to get mask) HERE
Font Great Vibes
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.

Paste paper 15, have invert checked on your mask and apply, delete and merge group, adjust your mask to fit your tag.
Paste frame 9, resize to 80%, click inside with your magic wand, expand by 5, paste paper of choice, I used paper 9, invert, delete, select none.

Paste fireworks 02 just above the mask layer on one side, resize to 80%, duplicate, mirror, duplicate, flip, duplicate, mirror and adjust, then merge these together.

Paste the coil countdown above the frame and erase any of the coil part showing, you just want the wordart part, adjust down some.
Now select all, float, defloat, add a new raster layer, expand by 2, fill with white and move below the wordart layer, moving back to the black wordart, merge down.

Resize the black balloon to 65% and the white one to 55% and place on the left side.
Paste tag 03 from the frame folder and resize to 80%, place on the left side above the balloon layer.
Paste your tube and place where you like.
Paste the New Years ball and place on the right side below the wordart.

Resize party cracker 03 to 50%, place on the left side below the tube layer, duplicate and mirror, move below the wordart layer.

Paste the champagne bucket to 50%, place on the right just above the New Year ball.
Resize the Metallic Flute to 45% and place by the bucket, duplicate and move below the bucket layer and adjust.
Resize the Doodle to 75%, place below the frame layer on the paper.

Resize Ribbon 05 to 75%, place on the right side just above the fireworks layer, duplicate, flip and mirror.
Paste flower 03 at the upper left side, above the fireworks layer.
Resize the Glitter Spill to 75%, paste and place where you like some to show and erase the rest, duplicate as many times as you like.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.

Showing the tag using one of Keith Garvey male tubes.

 

Warm Me Up!

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey .

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Lavender Winter Kit by Baby Dragon  HERE
Rocked by Rachel Mask Set 3_2 HERE
Font Karine aime les chocolats
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.
This is a short and sweet tut.

Paste paper 8, apply your mask, delete and merge group, adjust your mask to fit your tag.

Paste frame 2, free rotate either left or right, resize to 90%.
Click inside with your magic wand, expand by 4, paste paper 8, move below frame, invert, delete, but do not deselect yet, paste your close up tube, delete and now select none.
Duplicate your tube, Gaussian blur at 4, change the blend mode to hard light and merge down.

Paste element 10 below the paper layer, resize to 90%, erase the part on the right side, then duplicate, flip and mirror.
Being on the frame layer, paste element 16, resize to 85% and place at the bottom part of the frame, duplicate, flip and mirror.

Paste element 15 below the paper layer of the frame, resize to 85%, move up toward the top more, duplicate, flip and mirror.
Erase some of the ones on the sides that are overlapping the other one.

Being back on the top layer, paste your tube on the right side.

Paste element 28, resize to 90%, move to just above the mask layer and up some, duplicate and flip, always adjust to your liking.

Resize element 27 to 55%, place on the left side.
Resize element 01 to 35%, place below the bear on the left.
Resize element 26 to 50% and place below the bear and cupcake layer on the left.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.

Snow Flake Fairy

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Carolina Seabra.

You need a license to use this art work. Please do not use without a license.

 You can find this art at her Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Snow Buddies by Kittz Kreationz  HERE
 Rocked by Rachel Mask Set 2_1  HERE

Filters
Mura Meister Copies
Font I used was Lazy Dog

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
This is an easy peasy one.

Paste frame SB-51, resize to 85%, click inside with your magic wand, expand by 5, paste paper SB-6, invert, delete.
Paste SB-12, resize to 95%, apply Mura Meisters Copies-Encircle, move below the paper layer of the frame now.
Drop shadow with a dark blue on this one.
New raster layer, move to the bottom, fill with a color of choice, apply your mask, delete, merge group.
Adjust your mask to your tag.

Being back on the top layer, paste your tube and place in the center.
Paste SB-7,  move below the tube layer and down, duplicate, flip and move back down and below the first snow layer, line the ends up, then being on the top layer of the snow erase some of the dark part so the line does not show, then merge down.
Resize SB-17 to 55% and place on the left side of your tube.
Resize SB-22 to 55% and place by the knee of your tube.
Resize SB-35 to 70%, free rotate to the left at 5 degrees and place below the bear on the left side.
Resize SB-37 to 70%, free rotate to the right at 10 degrees and place on the right side.
Resize SB-50 to 50% and place on the right in front of the sign.

Resize SB-32 to 25%, duplicate and place on the right how you would like them.

Resize SB-12 to 15%, duplicate a few times and place on the snow where you like.
Then duplicate one of them again, resize to 80% and place in a couple more areas.
Paste a new SB-12 and resize it to 25%, duplicate however many times you like and place around the frame snowflake at the top area.
Give it your own touch on how to place them, take some of the smaller ones from before and place along with them.

Add any other elements you would like.

 Once happy with it all, close off any backgrounds, merge visible.

I added the xero filter Clarity once I merged, this is optional, you may like to just sharpen your tag.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Christmas Gifts

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Very Many.

You need a license to use this art work. Please do not use without a license.

 You can find this art at Verymany Tubes  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap CCAM by Designs by LK  HERE
 Rocked by Rachel Mask Set 2_1  HERE

Filters
Mura Meister Copies
Xero- Soft Vignette
Font I used was Close to You

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste frame 2, duplicate, resize to 75%, mirror, flip and move down, adjust the frames to your liking, erase the part of the larger frame showing inside the small frame, then merge the frames together.

Click inside each frame separately, paste paper 12, move so the snowflakes are in the frame, invert and delete. Do this again for the smaller frame.

Paste the bells, apply Mura Meister Copies-Encircle, move below the paper layer of the frames, resize to 90%, move up to the larger frame, duplicate, mirror, flip, resize to 80% and move to the smaller frame, duplicate again and mirror.

Paste the bells in the smaller circle, resize to 75%, moving below the frame layer.

Paste your tube, mirror and adjust in the larger frame, click inside the frame with your magic wand, expand by 5,  invert and delete, select none.
Duplicate, Gaussian Blue at 4, change the blend mode to screen or one you prefer.
Apply the xero filter, Soft Vignette with these settings.
Elliptical,  Sharp checked,
Foreground color, Diagonal Dots,
1, 1, 1, 255

Paste your tube on top of the frames, resize to 55%, if using the same one I am and place off center a bit.

Paste the tree on the right side, below the paper layer of the frames.
Paste the house below the tree layer and place how you like.

Resize the presentsbear to 85% and place on the left side.

Resize the Christmas Pudding to 40% and place by your tube.

Resize the cocoa cup 2 to 50% and place by the Christmas Pudding.

Paste and resize the gift boxes to 70%, place below the tube layer on the right, duplicate, mirror and move back over to the right and above the first gift boxes.

Resize the wordart Joy to 55% and place in front of your tube layer.
Resize the sleigh cookie to 50%, place on the right between the gift boxes layers.
Resize the gingerbread man to 40%, place below the cocoa cup on the left.

Adjust all your elements to your liking.

Paste paper 8, apply your mask, move to the bottom and adjust to fit your tag.

Add any other elements you would like.
 

Once happy with it all, close off any backgrounds, merge visible.
I added the xero filter Clarity once I merged, this is optional, you may like to just sharpen your tag.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

All Spruced Up for Santa



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap The Naughty List by Fab Designz  HERE
You have to join her FB Fan Club first but well worth it.
Template #135 by DD HERE
MPM Mask 95 HERE
 WSL_Mask 84  HERE

Filters
Xero-Radiance and Soft Vignette
EyeCandy4000-Gradient Glow
Font I used was TheNautiGal

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit the d key to duplicate, close the original, delete the credits.
Go to Image, Canvas size and make it 800 x 800 or one you prefer.
Paste paper 5, apply Mask 95 first, delete and merge group.
Paste paper 20, apply mask 84, delete and merge group, adjust your mask to fit your tag later.
Merge the top red rectangle down with the bottom one, paste paper 2, invert and delete, also delete the template layer too, select none.

Merge the bottom gold strip layer down with the top gold layer, paste paper 22, invert delete.
Select top crème square, paste paper 16.
Merge the Top and bottom green circles,  paste paper 1.
Select the white rings, add a new layer, fill with red, add noise at 40%.

Paste framefab1 over the red circle part. Add noise at 40% to the
red circle part.

Select the gold circle, Paste paper 12, invert, delete .
Paste your close up resize first if needed, invert and delete.
Change the blend mode to screen or one you prefer.
Apply the xero filter-Radiance.
Then apply the Soft Vignette with these settings
Elliptical, Foreground color, Diagonal Dots,
3, 2, 0, 255

Select the gold rectangles, apply EyeCandy4000-Chrome with these settings
Reflection Map-Outdoor.tif,
10.80, 50, 50, 0, 72, Inside Marquee checked
 and recolor to your liking, I did mine in green.

Select the crème rectangles, add noise at 40% or paste a paper of choice.

Resize your tube, if using the same one I am, I resized mine to 75%, place on the left side, move below the wordart layers, duplicate, move to the top and erase the leg area covering the wordart.

Paste the filmstrip below the tube layer and change the blend mode to hard light.
Select inside with your magic wand, expand by 4, paste paper 9, invert, delete, do not deselect yet, paste your tube how you like in each frame of the strip, then delete the excess of each one, then merge your tubes together. Duplicate, Gaussian blur at 4, change the blend mode to overlay or whatever you prefer, merge down.

Paste MsClaus sexy legs of choice, mirror, resize to 75%, move below your tube layer, duplicate, move to the top and erase the part covering the wordart.
Select each of the wordart and add a fat white gradient glow using EyeCandy4000, 3, 25 ,100
Resize the Christmas Cocktail to 45% and place on the left side.
Resize the Christmas lips to 20% and place on the right bottom side, free rotate to the left at 7,  all layers unchecked.

Add the sparkle layer below your second tube layer.
Paste the splat layer, and move to the bottom layer just above the mask layer and then up to the left top, duplicate, mirror and flip.
Back on the top layer, resize the candy canes to 45% and place by the glass on the left.
Paste the holly, move just above the mask layer and at the bottom on the left, duplicate and mirror.
I took the snowflakes and place them on the green paper in the filmstrip and erase the parts I did not want showing and move them around to my liking in other areas.

Add any other elements you would like.
 

Once happy with it all, close off any backgrounds, merge visible.
I added the xero filter Clarity once I merged, this is optional, you may like to just sharpen your tag.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Grecca Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Toriya .

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Scraps N Company  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
In The Tavern Kit by WaterLO Project  HERE
WSL_84 Mask HERE
Filters used
Xero-Porcelain, Clarity and Soft Vignette
Font Candlescript Demo
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.

Resize paper 16 to 23%, paste and apply your mask, invert, delete and merge group. Take your pick tool later and adjust mask to fit your tag.

Resize frame wlop_itt to 25% and paste on your new layer, move to the left some and up, duplicate, change the blend mode to hard light, merge down. Duplicate, resize to 70%, move down and over to the right some, free rotate to the right at 15 degrees.
Click inside both frames with your magic wand, expand by 4, resize paper 14 to 22%, paste, invert, delete, move below the frame layers, do not deselect yet. Paste your tube, hit the delete key and select none, erase any of the tube in the smaller frame.
Erase the large frame that is showing in the smaller frame.

Resize your tube to 70% if using the same one I am, paste and just have the pottery showing in the smaller frame, erase any excess, merge this down with the other tube in the bigger frame. Duplicate, Gaussian blur at 4, change the blend mode to overlay or one you prefer.
Now apply Xero Filter-Porcelain then Clarity and then Soft Vignette with these settings
Elliptical, Foreground colorDiagonal Mesh,
0, 0, 0, 255
also apply the Soft Vignette to the paper in the frame.

Resize the original tube to 45% and place off center, being on the top layer. Move the tube below the small frame layer, duplicate and bring to the top, erase any of the legs you do not want showing above the frame.

Resize element 10 to 45% and paste on the bottom layer, duplicate, flip and mirror.
Resize element 55 to 25%, place on the bottom, below the paper layer of the frame, duplicate, flip and mirror.
Resize element 72 to 7%, place on the upper right side on the green leaves, duplicate and move to your liking, move below the tube layer.

Resize element 67 to 20%, move below the paper layer and place at the bottom of the frame on the left.

Resize element 5 to 15%, place on the left side above the frame layer.
Resize element 16 to 8% and place on the left by the wine bottle, duplicate and move over a bit.
Resize element 54 to 15%, place above the mask layer on the bottom right, duplicate, flip and mirror. Always adjust when you flip and mirror an element.

Resize element 73 to 10%, place at the upper left side, duplicate, mirror and move down to the lower right side, free rotate to the right at 20.

Resize element 36 to 30%, mirror, move below the paper layer of the frame on the right, adjust and erase the green stem you do not want showing, duplicate, free rotate to the right at 90, move to the bottom below the grape layer and adjust.
Go back to the first one again, duplicate, move to the left, free rotate to the left at 20 and adjust to your liking.
Resize element 70 to 15% and place on the right side and adjust the dragonfly.

Resize element 8 to 10%, place below the wine bottle on the left. Duplicate however many times you would like and place in different areas on your tag.

Resize element 69 to 25%, move below the paper layer of the frame, duplicate a couple of two or more times, flip and move around to your liking.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.
 

Silver Christmas

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey .

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Silver Bells Kit by Rainy Sweetz  HERE
WSL_84 Mask HERE
Filters used
Mura Meister Copies
Xero-Soft Vignette
Font Mr Lackboughs
 

Drop Shadow usually V2 H2 50 black

Open a new image 800 x 800 or a size you prefer.
Paste the dark gradient paper, flip, apply your mask, delete and merge group.
Adjust the size to fit your tag later.

Paste the silver design, resize to 85% and mirror.
Paste the outline poinsettia heart and resize to 80%, click inside with
your magic wand, expand by 5, paste the smooth silver edge paper, invert and delete, do not deselect, paste your close up, place to your liking, delete, select none.
Moving both the paper and tube below the frame layer.

Duplicate the tube layer, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to hard light and merge down, change the blend mode to Luminance (L).
Apply the Xero Filter-Soft Vignette with these settings
Elliptical, Foreground color
Diagonal Mesh,
0, 0, 0, 255

Paste snowflake 2, resize to 55%, apply Mura Meister Copies-Encircle,
move below the paper layer of the frame, sharpen once.

Paste the silver tree and resize to 70%, place on the right side, add noise at 25%.
Paste your tube, mirror and place on the left side.

Resize the gold merry Christmas button to 30%, place at the top on the left side below your tube layer.
Resize the silver holly to 30% and place on top of the button on the left.
free rotate to the right at 90 and adjust.

Paste the silver poinsettia, move to the bottom layer, up to the left corner and adjust to your liking, duplicate, flip, mirror and adjust again.
Duplicate again, bring to the top layer, resize to 40%, move to the left and below your tube layer.

Resize the hobby horse ornament to 40%, place by the tree and erase the hanger.

Resize the silver ornament to 20%, free rotate to the right at 25 and place on the right side below the horse layer.
Resize the hot chocolate to 25%, place on the left side.
Resize the ribbon to 80% move to the bottom, below the mask layer, take your pick tool and rotate it a bit to the left.

Resize the scroll to 65%, place at the upper right below the mask layer, duplicate, flip, mirror and adjust.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.
 

Autumn's Secrets

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  JM Leotti.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Scrap Amazing Autumn by Gimptastic  HERE

Dee's Autumn Mask Set 1- #2  HERE
Xero Filter-Soft Mood and Clarity
Unplugged tools-Interlace

Font of Choice, I used Final Fantasy

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image and as usual  mine 800 x 800.

Paste paper 4, resize larger to 115, apply your mask, delete and merge group.
Resize mask to fit your tag later.

Paste frame 5, duplicate, change the blend mode to overlay, merge down. Then click inside with your magic wand, expand by 5, paste paper 8, invert, delete, select none.
Paste your tube, move below the frame, duplicate, move above the frame and erase the excess part of the tube.
Apply the Xero filter, Soft Mood and then Clarity to both tubes.
Then on the top tube apply Unplugged tools, Interlace with these settings
4, 20, 1 and 0.

Paste frame 4, move to the bottom layer and down how you like it, duplicate, flip and mirror, adjust, and merge down.

Being back on the top layer, paste the seed pod on the left side and erase some of the stem.
Resize the mug to 75% and place by the seed pods.
Resize the cat to 85% and place by the mug on the left.
Resize flower 7 to 70%, place below the mug layer.
Paste flower 6 below the paper layer of the frame, mirror and move back to the left bottom side, showing just part of it past the seed pods.
Duplicate, flip, move down toward the bottom and place so some of the flower is showing again.
Paste flower 8 below the seed pod layer, mirror and adjust.
Duplicate the seed pod, mirror, flip and move to the bottom below the flower layer. Duplicate again and move more to the left and erase any stem showing.
Resize the berries to 60%, place under the flower layer.

Flower 1 resize to 75%, mirror, place just above the frame layer, duplicate and move one more to the left and down, the other more to the right and up a bit.
Refer to my tag for placement.

Paste branch 1, free rotate to the left at 90, place on the left side below all the elements, duplicate and mirror.
Paste branch 2 and move to the bottom, above one of the flower layers, duplicate and move below the flower layer and back to the left more.

Resize bird 1 to 40%, place on the left on the branch, duplicate, mirror and move to the bottom right on the branch.
Resize the ball of twine to 60%, place behind the cat on the left.

Resize Mushroom 2 to 50%, place on the right side below the elements, duplicate, mirror, bring back to the right and move lower than the first one.
Paste flower 5 at the upper right side just above the flower layer behind the paper layer of the frame.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

 

Autumn Wishes

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Chris Pastel .

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap by GS Autumn Mist  HERE
Dee's Autumn Mask Set 1-#3  HERE
Filters
Xero-Radiance, Porcelain and Soft Vignette
Mura Meister-Copies
Font Puppy Pooky
 

Drop Shadow usually V2 H2 50 black

New image a size you prefer,  as usual mine is 800 x 800.
Paste paper 4, resize larger to 125% and apply your mask, delete and merge group.

Paste frame 5, duplicate, go to Adjust, Blur, Gaussian Blur at 4, change the blend mode to screen, merge down.
Now click inside with your magic wand, expand by 5, paste paper 5 or one you prefer, invert, delete, move below the frame layer. Do not deselect yet, paste your close up tube, delete, select none.
Duplicate the tube, Adjust, Blur, Gaussian blur at 4, change the blend mode to overlay, merge down.
Apply the Xero Filter - Radiance with these settings
15, 35, 60, 155
then apply Porcelain.
Then Soft Vignette with these settings
Elliptical, Foreground color,
Diagonal Dots
0, 3, 3, 255

Paste flower 3, apply Mura Meister Copies, Encircle, move below the paper layer of the frame.
Paste charm 1, apply Mura Meister Copies, Encircle and move just above the flower you just did.

Paste flower 3, move toward the bottom of the frame, being on top of the frame layer, duplicate and mirror.
Duplicate, resize to 60%, duplicate again, mirror and place where you like them.

Paste flower 1 in the center, duplicate, resize to 70%, place on the left side below flower 3 layer, duplicate and mirror.

Resize and paste your tube and place on the right side.
If using the same tube I resized mine to 40%.
Paste the stick, free rotate to the right and place to cover the bottom of the legs.

Mirror and paste the leaf below the flower layers and toward the left more.
Paste the mushroom on the left side below the flower layers, duplicate, resize to 65%, mirror and adjust on the right side, moving below the stick layer.
Resize the candle to 75%. place on the left side below the flower layer.
Resize the nut to 75%, place on the right side below the flower layer.
Resize the Deco to 70%, free rotate to the left at 90, move above the stick layer on the right and adjust so it shows paste the nut and smaller flower, duplicate, mirror, move below the candle layer and adjust to your liking.
Duplicate it a couple more times if you like and place wherever you like.

If you want a few more of the leaves from the mask showing, I took my free hand tool and went around the part at the upper left and copied and pasted in a few places to give more leaves on some of the edges.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

Hope you enjoyed doing this tut.

 

Pumpkin Babe-3 Piece Set

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

Supplies Needed

I used PSPX...but any of them should work.

 Pumpkins and Candy Corn by Magik   HERE
WSL Mask 208  HERE

Filters
Xero-Porcelain and Soft Vignette
Mura Meister-Copies
AAA Foto Frames

Font of Choice, I used always forever

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image  800 x 800 or a size you prefer.
Paste paper 10, apply your mask, delete and merge group, resize as needed later for your tag.

Paste frame 2, click inside with your magic wand, expand by 5, paste paper 2 or one of your choice, invert, delete, do not deselect yet, past your middle side tube if using the same one I am, delete and select none, then mirror your tube.
Duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to Overlay or Hard light, which ever you prefer.
Apply the Xero filter- Porcelain first and then
Vignette with these settings
Gradient Shape-Diagonal 1
Sharp checked, Foreground colors
Diagonal Dots
0, 0, 1, 255

Open frame 3, take your free hand tool, draw around the one curly on the bottom right of the frame, paste, flip and apply the Mura Meister filter-Copies on Encircle and then resize it larger to 115, move just above the mask layer.

Close off your mask layer  and curly layer, merge visible, duplicate, resize to 50% and place down on the right side of your tag.
Now reopen your mask and curly layers.

Now on that same frame 3, (this is optional) erase it all but the pumpkins, being careful around the green stems, and place on the left side of your frame layer.

Paste the Sign and free rotate to the right at 20 degrees.
Resize the cupcake to 40%, place below the sign layer and move to the left.
Resize Halloween friends to 50%, place on the right more.
Resize the thorned candy corn to 35% and place on the right below the friends layer.

Resize the jack-o-lantern to 35%, place on the left side, duplicate, resize to 80% and place on the smaller frame picture on the right.
Resize the pumpkin cuppy to 35%, place behind the sign layer where you can see the eyes.
Resize the cartoon candy to 40%, place on the left below the sign layer.

Add any other elements you would like.

If you are going to do a Signature and Avator, do not merge just yet, wait until those are done before you merge this tag.
 

Then once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

Signature tag
Open a new image 600 x 250, paste a paper of choice, I used paper 2.
Close off all the layers on your tag you just made except for the mask, frame, paper and tube inside frame, copy merge and paste in your new image, resize to 90%.
Now go back and open all the layers you just closed.
Copy and paste your tube, resize to 90% and place on the left side.
Paste the sign and resize to 50%, place by your tube.
Paste the pumpkin that was sitting on the small frame, move below the sign layer and adjust.
Copy the pumpkins that were cut from the other frame, place on the right side, resize to 70%, duplicate, mirror and move below your tube layer.
Resize the Halloween friends to 60%, place on the right side in front of the pumpkins.
Resize the thorned candy to 60%, place below the pumpkin layer and over a little bit to the left.
Resize the cartoon candy to 55%, mirror and place on top of the pumpkins on the right.
Resize the pumpkin cupcake with the eyes to 50%, place, duplicate and lower a little bit from the other one.
Once you have use the parts of this signature for your Avator, move the frame back in place and open your tube layer and merge visible, add frame of choice and add your copyright and name.

Frame I use was AAA-Foto Frame width 5 and Opacity at 70 for both the Signature tag and the Avator.

Avator depending on your forum or group for size.
I did this one 150 x 150
From your signature tag, close off your tube layer, move the frame layer over to the right a bit, then copy and paste into your new layer, resize to 90% and adjust to your liking, merge visible and add your copyright and name or initial and frame of choice.
That's it

Hope you enjoyed doing my tut.

 

Witch in Training



 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Misticheskaya .

You need a license to use this art work. Please do not use without a license.

 You can find this art at PFD Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Ghostly Manners FTU by Angela's Creations  HERE
The kit is no longer on her blog, have no idea what she did with it.
Sorry for the problem.
Template by Dee and Kandee  Collabs  HERE
WSL_Mask 84  HERE
Filters
Oliver's Filter-Toile d' Araignee
Font Witched
 

Drop Shadow usually V2 H2 50 black

Open the template, duplicate and delete the credits, and the star, then go to Image, canvas size and as usual mine is 800 x 800.

Resize paper texture 70 to 84%, paste and apply your mask, delete and merge group, move below the template layers.
Green rectangle, resize paper sg3 to 84% and paste, invert delete.
Leave the orange strip as it.
Teal rectangle,  resize paper texture 55 to 84%, paste, invert, delete.

Purple oval, resize paper texture 70 to 84%, invert, delete.
Green stripe and orange circle leave as is.
Orange square, paste paper 18, apply Oliver filter-Toil d'Araignee
Leave green rectangle as it.
Teal circle, resize sg3 paper to 84%, paste, invert, delete.

Resize the tree to 60%, mirror and place off center a bit.
Resize the grass hill to 50%, place on one side, duplicate and mirror.

Resize your tube to 40%, and place on the right side.

Resize the haunted house to 10%, free rotate to the right at 10%, place on the right side behind your tube layer.

Resize the pumpkin patch to 15% and place in the center more in front of the tree.
Resize the boiling cauldron to 25% and place on the left side.
Resize the bottle to 10%, place below the cauldron layer, duplicate, move over by the witch.
Merge all the wordart together and resize to 75%, place at the bottom of your tag where you want it.
Resize the bat to 3%, duplicate however many times you would like and place where you like them.
Paste the sparkle element 2 on the left side, move below the orange circle layer.
Resize the owl to 15%, place on the upper left on the tree.

Resize the ghost to 5%, place by the house, duplicate a couple of times and place where you like.

If you are going to do a signature do not merge yet.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

If you want to do a signature

Open a new image 600 x 250, fill with #cb6c1a, close off your tube layer and wordart layer of your tag and paste, resize to 95% and adjust how you want it, then go back to your tag, open your tube layer, and copy and paste on the right side.
Merge visible and add a frame of choice, then add your copyright and name.
For the Avator,
size depending on your group or forum.
I did mine 150 by 200, copy the tag, resize to 75% and place how you wanted it, then merge visible, add your frame, copyright and name.

 

Hope you enjoyed doing this tut.
 

Boobylicious

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey .

You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE

 

Supplies Needed

I used PSPX...but any of them should work.
Top Cats Tagz kit BCA  HERE
Template BC 2 by Tamie HERE
Millie's PSP Madness Mask 54  HERE
Filters
Xero-Soft Vignette
Tramages-Tow the Line
Font Authentic Hilton
 

Drop Shadow usually V2 H2 50 black

Open the template, duplicate and delete the credits, then go to Image, canvas size and as usual mine is 800 x 800.

Paste paper of choice, I used #17 and apply your mask, delete and merge group. Resize your mask large to fit the template and move to the bottom of the template layers.

Paste element 57, move down to just above the mask layer and over to one side and place how you like it, duplicate, mirror and adjust again, erasing parts that you do not want showing.

Starting on the bottom, with raster 6, select all, float, defloat, paste paper 1, invert, delete, paste your middle size tube and adjust to your liking, delete, select none.

Apply Xero filter-Soft Vignette with these settings

Gradient shape-Diagonal 1, Check Sharp

Effect Type-Foreground color

Diagonal Dots

0, 2, 2, 255

 

Select raster 1,  select all, float, defloat, paste paper 4, invert, delete,  now paste your close up tube and position how you would like it, delete, select none.

Apply the Xero Filter-Soft Vignette to this tube, with the same settings.

 

Select raster 5, new raster layer, fill with #f864ac, then go to Effects,  Texture effects, Weave, apply with these settings

1, 10, 1 both colors white, fill gaps checked.

 

Select raster 3, paste paper 4, invert and delete.

Raster 10, apply a medium gradient glow with a pink color of choice.

 

Raster 2, new raster layer, fill with #f864ac and apply Tramages, Tow the Line.

Raster 4, paste paper 5, invert, delete, select none.

 

Select raster 7, new layer fill with the pink color again, paste your middle size tube and have the breast area showing, invert, delete, select none.

Apply the Xero filter-Soft Vignette with the same settings to this tube.

 

Paste element 34 and move toward the bottom, click inside with your magic wand, paste paper 17, invert, delete, move below the film strip,  do not deselect yet.

Paste your tube how you like for it to show, duplicate your tube before pasting and place where you want. I did the boobs in the 2 end slots and the face in the center part, using the smaller tube and the middle size tube.

Paste your full tube, mirror and move to the left more.

 

Resize element 49 to 50%, place on the left lower side below the wordart layer, free rotate to the left at 25, then sharpen.

Resize clock to 50% and place on the left side also.

 

Resize element 18 to 65%, place on the right side.

Resize element 19 to 75%, place on the right below the compact layer.

Resize element 20 to 75%, free rotate to the left at 90, place on the right by the compact.

On the pink wordart add noise at 60%.

Resize element 40 to 65%, place one on the left in front of the film strip, then duplicate, flip, mirror and place at the top.

Paste the sparkle below the tube layer, move down just a bit, duplicate, mirror, flip and adjust.

 

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize first, then add your Copyrights and name and that's it.

 

Hope you enjoyed doing this tut.